Search results for query: 66 barracuda

Nice!!

I have Headman Hustlers on my 66 Valiant with an aluminum Mopar performance master cylinder. I had a stock iron master cylinder from my 72 barracuda before the aluminum one and the #7 pipe almost touched the master. The aluminum has an inch of clearance. To avoid boiling the brake fluid, i added...

sure I can actually in good shape 75 and the ride and say 20 deposit?

Hardtop doors are entirely different. 64-66 hardtop doors are the same for Barracuda, Dart and Valiant hardtops, and I believe convertibles as well. Trim holes, vent frames and glass different between different models. Barracuda door glass is different than Dart ht. Valiant and Dart hardtop...

I really like the 71 Fury with the Paisley top and seats. The 66 Barracuda is a close twin to mine

Yeah, but my aim will get better. :poke: Now, get to work!

1st one is 66 barracuda dash part

Thanks for the info. Does the 66 valiant rings look reasonable on the car?

Thanks. You are correct about the ‘66 Barracuda top quarter panel trim being aluminum and the ‘65 being stainless with a different enough shape they don’t fit with the ‘66 tail lights housings. I have SlantSixDans recommended Les bulbs for the tail lights - I just need to find them.

Long story short. Bought back my first car some years ago (-66 Barracuda) and I traded it for a motocycle with my son. Now I’m helping him with restoration of the car. There’s quite a bit of rust on the car so there is were the work is in progress at the moment. Since we are switching the...

...bucket seats that I believe/ hope to be the correct seats for our 65 Barracuda build. (I was told these seats were from either a 65 or 66 barracuda) Would anyone, with more experience and or knowledge than I, be able to tell me if I did get the correct seats and what other pieces I might be...

Wouldn't that fit a 66 barracuda also?

If a light could be placed under the knobs somehow, they could be lit up. I might see if that could be done on my 66 AC Barracuda dash in my 65

Inside door emblem for early Barracuda. Good chrome. $20 plus postage cost.

Hello all, I just picked up a 65 Formula S tachometer. How do these things work? Do they need an external triggering device, or does the negative side of the coil hook directly up to the tach for input? I see that there are electronic upgrades for the tach 63- 66 Tach Sender Upgrade Board...

The rear shields are the same for 63-66 A bodies.

A '66 Barracuda doesn't use a part like that.

Same length all 727s with the long housing. Approximately 4 inches longer than a 904.

...larger than 15" on pre-1980 classics is that their suspension is not designed/calibrated for larger rims/lower cross section tires. My '66 Barracuda has 17 Torq-Thrust with 225 45R17 Yokohamas mounted on them. It rides terrible compared to my first '66 that had 15" with Goodyears mounted on...

Do you know if they will fit a 66 Barracuda. I have 10 inch drums small bolt pattern with 13 inch tires. My drums are warped and out of round. I guess from sitting too long.

I have a wheel from a 66 Barracuda I believe. Possibly for others as well. Needs restored, or just a leather wrap.. $100 + shipping from FL. PayPal F&F or MO.

I like the early Valiant/ Barracuda front ends. 64 Dart is a favorite. 65 not bad. 66 is my least favorite and I own one. But, I was looking for a 64 when my 66 came up for sale and it was a short drive away, had the HP273 and 4 speed with all the rest. I couldn't say no to it even if isn't my...

I have a engine bay harness in pretty much complete condition along with a few other pieces. Good for bits and pieces. Told it's from a 66 Barracuda. $25 plus the ride. PayPal F&F or MO

Hi all I am looking for a push button a/c / heater switch part # 2587564 for my 66 Barracuda project Joe

1974 paper Hollander shows: Valiant, also see Barracuda '64-'65 624 '66 682 '67-68 730 '69-70 810 '71-72 924 '73-74 996 Note in interchange section states: for 810, 924 fits

[FOR SALE] - 1966 Barracuda Parts Car...Whole @Dutchrebuild might part this car out in November if you are not in a hurry. The one year 66 can be tough to get certain parts for. I bought parts from him and everything went great. That dent in yours would be an easy fix though. Much easier than...

looking for a rear bumper and deck lid for a 66 Barracuda

66 Formula S Barracuda, my first car when I was 17, 1975

Looking at the fender tag for my sons Barracuda -66. There’s code p 9 small letter, I’ve looking for what this stands for but haven’t found anything. Any of you guys who can help us out with this one. Many thanks in advance Swedefish.

Those look like ones for a '66 Barracuda.