Search results for query: *

Ok well this is a wanted add

Do you have one?

TTT

Looking for an Edelbrock SP2P. This will be going on a 318....Building for fuel economy on this one

pm sent

my car is currently at my buddies shop an hour away from me so soon as I get down there ill get more pictures and ill get the actual brand of rockers. They broke across the casting line. its not a straight clean break as you can see from the pick but it starts at the front of the casting line...

my heads were gone over by a reputable guy...there again not mentioning names. absolutely no binding whatsoever. everything was checked and gone over before they key was even turned the first time. Same rockers were in the engine for the 3 years ive had it now. Rockers I was sold from him were I...

Big thing now is which rockers to go with this time around?

I kinda feel bad about blaming the lifter. when I took the valve cover off I played with the lifters and that one had a lot of play so thats what I figured it was. Last night I actually took off my Rocker girdle as well and thats when I could see the rocker was cocked. Then I felt around and...

hadnt really dug into the engine yet. the broken piece is MIA so im hoping it didnt fall in with my cam. Around the stud area I was seeing metal dust/chips so im gunna have to tear it down and clean. im just hoping nothing else is damaged. Definately wouldnt recommend those for anything.

well it wasnt a lifter after all! it was a junk *** rocker!

It’s all good buddy I figured you were. Just trying to get ducks in a row. Figured ask ask ask!

I was under the assumption that all 2bbl slant intakes were super six??. Either way shooting for 3-350hp at around 10-12psi. More is always better though!

You’re good buddy. Maybe we can both get info we are looking for. I’m building mine for a truck as well. I thought about building it for my valiant but in my eyes it NEEDS a V8

Mainly at the moment I’m asking if the cast iron super six intake will be sufficient on a boosted application or if I should go with another intake.

I’m in the planning stage at the moment. I have a 2300 Holley sniper I’ll be using

How well would the iron super six intake fair with boost? Also I’m going to keep this post going with future questions.

Looking for a good used aluminum 2bbl or 4bbl slant 6 intake

Been running my setup for 3 years (~8000miles) mixed highway and around town.

Running Hughes 1129 dual valve spring 145# @ installed height, 358#@ .550, 375#@ .600 lift I’m somewhere in between

I’m running a MAGNUM based 408. So yes I’m running a spider plate. My lifters I have now are not link barred. Thank you yes me as well. It’s frustrating to me that all these cam/lifter company’s quality is going down the shitter. I won’t even look at a flat tap setup anymore unless I direly...

It’s a 408 magnum, EQ heads modified by B3 Racing, Howard’s .565 lift cam, roller rockers purchased from B3, rocker girdle etc etc not stock by any means. That’s why I opted for the Performance hyd roller lifters by a well know company. Been in the car 2 years maybe have 8000 miles on them...

Drop in magnum (without bar). I couldn’t find a set of magnum style solids either. All solids I’ve found were the retrofit

I’m not going to say a brand but they were a performance hyd roller. The faulty one collapsed.

Any company out there that make an actual quality lifter anymore? I have had a set of brand name hyd. roller lifters in my car for 2 years and yesterday during a car cruise one desired to give up on me 2hrs away from home. These were supposed to be “performance” lifters. I’m kind of over the...

I run Pump E85 from the same store (sheetz) I have a 15 gallon cell and fill up 2 or 3 race fuel cans usually every visit. Ran the same with both the summer and winter mix. Early spring it was $1.85....now (summer mix) its $3.09. Same results either way. It's not horrible just a brain scratcher.

OK guys so I've been tuning my carb and still alittle confused. I'm running a 408 /904 on E85. I'm using an AEM LAMDA A/F gauge. At idle with the car in gear it's idling at 750RPM @8in vacuum. Park at idle it's at 12in. At first it was RICH at idle and light cruise. (.680-.740) I pissed...

My buddy has a Tremec 3550 laying around he said I can have if I can make it work. Currently I have a mild 360 with 904 and 3.91 rear gears. To me the overdrive would be very beneficial for cruising. I did find a bellhousing that will adapt the tremec to my 360 but I'm not too sure of what...