Search results for query: 2004r

Around here, FINDING a 200 core is a problem

I did some reading on the 200r4 trans. Having rebuilt at dealer level a bunch. They are a good trans and smaller than the 2wd Mopar OD so fit ment is better in an Abody. Sadly Mopar newer engine swaps are a PITA unlike Chev or Ford swaps. I wish Ma MoPar was as kind to the aftermarket kingdom as...

...You can always call SOLO PCMs in Florida, which is where I got my ECM with no security and set-up for a manual trans car, as I run a 2004R. Another great resource for SCT Tuner custom programming is Chris at Performance Injection Equipment. https://www.performanceinjectionequipment.com/

Then u shouldn’t have much of a figment issue with that trans. Kim

Monster transmissions makes one that can take 425 HP....other remanufacturers might be able to get more HP?? 2004R Transmission, 200-4R Transmission, 200R4 Transmission, 2004R Monster Transmission, Monster 2004R Transmission, Rebuilt 2004R, Rebuilt 2004R Transmission, 2004R Rebuild

No sir. Tranny is a Stage 3 2004r

I have everything but time is what I dont have currently. 8 3/4 with 3.23 gears and the 200 4r is rebuilt and ready to go in. I made all the templates of what I believe I need to cut out to make it fit.

I doubt someone will be selling one ready to go. You'll have to build your own. You have to remember that the diesel guys are using a version of this trans (618) I believe. The OD unit bolts up to the A500 or A518. The guy I got my trans from had it rebuilt and they put the 618 od unit on it.

So what's the problem with adapters?

lol , one of EA stage three 2004R has been behind a 608 bbc 1170 hp to the wheels for 3.5 years now . And i assure you it gets the snot driven out of it. fluid is pink with no material and its super nice and smooth but get on it and it will snap your head back 1-2 2-3 shifts . im putting one...

Hey thanks for adding input as I have followed a lot of your stuff! The engine is up and running with just the pre-cat. Smooth as silk!! I owe a TON to this site and a guy here who went OUT OF HIS WAY to coach me through this. I have not driven it yet, but hope that my 97 does not go into...

...sold me an ECM for a 1999 stick shift 5.9 Magnum pick-up without the key security for a very reasonable price, which I can''t recall now. I didn't need a transmission control module , as I'm running a modified 2004R transmission from Extreme Automatics. It's the best automatic I've ever driven.

Got the Trans, bell , billet converter , flexibility late and pilot going to mate the engine and trans tomorrow. Stage 3 EA 2004r with transbrake. Ill keep ya posted.

getting started , removing my r3block 360 mag and sst a41 tranny. And installing my 340 based 422 w2 small block and EA stage 3 2004r with billet converter and transbrake. Got started pulling engine and trans. Lots of stuff for sale ,

A nice setup for sure. I wonder if a 2004r can be built to stand up to a built 451. About 600 hp?

Anyone tried it on a 440? Will the 2004R hold up to one? Thanks

I’ve heard good things about Lonnie at extreme. I’ll watch this post and see how things go. I was gonna go 727/gearvendors. But i like the 2004r gear ratios better. Thanks

True. Add the 2004r and there’s an overdrive that fits.

...the automatic shifting for OD and lockup. When I had the 2.73 gears in the back I ran 2,100 RPM at 80mph and got 25 mpg all day long on the hiway. Some prefer the GM 2004R trans, but they need to be upgraded internally and need an adapter plate to the Mopar motor. Some things to consider...

A 2004R and some 3:90 or 4:11 gears would work really nice. The 2004R is slimmer than the PG but the trans mount on the 2004R is further towards the back. I always use a non-lock up converter to avoid the switches, wires and brake pedal lock up disconnect. It will be deadly off the line and...

Just made the first test fit of my 2004R behind the 340 in my 73 Dart Sport. Will have to trim more than planned from the passenger side crossmember but the driver side trimming was good the first time. Just have to weld them up now. I'll post some pics in my build thread later for anyone using...

...wheelie all the way to and from work “ Which may well be the case and im not sayin a word for or against that. Me personally , im putting a 2004r behind a smallblock and for the strength to cost ratio ill take it. Example : I also have a t-56 behind a big hemi backed by a 9” that i catch...

I used the mopar newer (90s) 5.2 starter (the small one), gives you clearance for the exhaust. I had to do a little extra trimming to get the starter nose to clear. It's all in my long post/thread when I built built and installed the 2004R. Treblig

...or that is readily available just because of the chevo popularity . yup my tranny was expensive . i have EA strongest build available. Stage 3 2004r built to hold over 1K hp Billet converter Deep pan , Converter pilot bushing for sbm machine work to install the bell adapter EA Designed...

I thought that was your build that had that info. You even made a bracket to attach the support for the cantilever.

Depending on how they are built they can handle 500 HP> Gearstar 200-4R Overdrive Transmission - Chevy High Performance Magazine

The 2004R will survive well if it's built correctly. There are many option on HP parts to make it pretty tough!! A stock 2004R probably wouldn't last very long behind a high horse power car. treblig

I agree, it's a little odd. If you look on their site they sell a cross member and an upper hoop kit for the GM 2004r. Wonder why they didn't don't for this trans.

A nice cam, good dual exhaust, 4:10 gears and a 2004R overdrive trans. He'll have plenty of pep and cruise at 65MPH taching 2000RPM (depending on the size of his rear tires). Treblig

2004r overdrive and then you can leave the crossmember and sheet metal in place. Looks good finished though.