Search results for query: timing chain

If it starts and runs good for 20-30 seconds, I doubt it's the timing chain

Replace the timing chain.

Since you have the front off, I would replace the timing chain. Not that expensive......

Wouldn't timing chain slop show up if you moved crank back n forth and watching the rotor? If sloppy chain rotor would hardly move.

I bought a new timing chain cover and I thought I had the right one as the timing marks lined up on the drivers side but as it turns out the new opening for the crank shaft is larger than the original, will it still work ? or am I better off getting another one that is the same size opening as...

All he needs are rings, bearings, and gaskets, timing chain and gears, and possibly a camshaft. (Isky E4)

Confirm timing to #1 cylinder. Maybe your timing chain has skipped.

The timing should still be stable even if it needs rebuilt. If the damper hasn't slipped, it could be the timing chain slop but that doesn't sound terrible.

Anyone have a use for a good Used 1958 to 1978 Big Block Single Bolt Steel Gear Timing Set. Includes cam gear, crankshaft gear, chain, bolt, washer, and oil slinger. Everything is in very good condition. $25.00. Local pickup, or buyer pays shipping.

Direct Connection chrome valve covers, chrome timing chain cover, and oil filter on this one:

I don't believe the 3.3s are interference engines. A broken timing chain would just be a broken timing chain, but timing chains on those engines are not a problem. I wouldn't touch it, but it's your money! Have fun!

Using the later water pump, requires using the later timing chain cover and a later radiator that has low passenger and high drivers water plumbing.

Timing Chain Cover crankshaft opening is the wrong size

Hello all, I need a timing chain oiling tab and a camshaft thrust plate hollow bolt for a 318. See pic for those parts installed.

New Mopar small block timing chain tensioner. I bought many year ago and never used. Part number must have been torn off box. Tension spring needs to be reset as the pull pin popped . I did drill one addition bolt hole where the cam plate bolt would go. (bottom right hole) $50 shipped US

I have these three timing covers for the big block engines. Any one that you want. $20.00 each. The timing chain and gear set is from back in the later 1970's or early 1980 time frame from the old Direct Connection, factory parts catalog. For the big block engines with the single cam bolt...

If you need a timing chain, almost everyone has gone to one source that casts a thin three spoke cam sprocket. These reportedly have issues if you go past 4000 rpm on a regular basis. The exception is the JP / Roll-Master double row timing chain set, which is the one you want for a performance...

Yes, OEM had nylon sprocket teeth.

I agree i would bet it jumped a few cogs on timing chain

Well yeah, it kept on retarding the timing. As you retard timing, it increases top end power. To a point. lol

Ok it's been quite sometime since I've put together an engine. (Over 20 years) First the camshaft plate under the timing cover. Mine has no slinger that I can find and 3 bolt holes, none of the three bolts have a hole for oil? It does however have a small drip piece. Also did Chrysler...

Page 2 post#49 273 Build

I ran one, it broke and the flat spring tried to eat its way through the timing cover. Never again, the chain must be tight and I like rollmaster, they are an IWIS chain.

There’s a “drive” side of the chain and a “slack” side of the chain. So moving the crank back and forth is not going to really show you how much slack you have. Best is to pull the cover and look at it with a degree wheel and check the amount of movement. If the timing is jumping 3-5 or more...

Is the intake manifold still suspect on a big block? I wasn't sure if that was only on the small block cars. Thanks for the heads up on the timing chain.

I have a 71 and a 72 timing chain cover in excellent shape $40 plus the ride each I have a lot of parts and cars and trucks for sale

This thread is for the general discussion of the Article How to Rebuild a Small Block Part 10A (Optional): Timing Chain Options. Please add to the discussion here.

No customers timing chain.

I replaced the timing chain back in March. Tomorrow I'm going to drain and pull the radiator so I can pull the timing cover and check to see if anything came loose in there.

I did but wouldn't again. If you have a quality double roller timing set it is really unnecessary. I was thinking, where does the plastic go that wears off the tensioner block as it wears?