Search results for query: *

To abodyjoe and all others, I guess this will be my 288th post —— I have a lot more posts on the “ B “ , “ C “ , and Forward Look sites….. But you can P.M. me, as per forum rules , and I will send you my cards and flyers…. I have been at Chryslers @ Carlisle all 34 years , and went to the MOPAR...

^^^ N O T ^^^ 1965 - 1972 w / Drum and w / Disc —— they have been OBSOLETE for many years now….

..., and all others reading this , A few people already have suggested you get in touch with me…. You would be smart to do so , indeed…. I have *** N.O.S. *** U.S.A.made *** Ball Joints for 1965 - 1972 with Drum Brakes 1965 - 1972 with Disc Brakes 1973 - 1976 P.M. me ,as per forum rules, if...

Thank You, Toolmanmike.... Didn't realize it ---- deleted five (5) No Responses immediately.... There is room in there now for whomever needs me.... Craig....

For a LOT Less $$$$ , I have *** O.E.M. MOPAR *** in the MOPAR Box ***

Check your P.M.

P.M. sent….

No —- still says full….

Can’t send you a P.M. —- your inbox is full …..

They are in the USED world Only --- as New Hub & Drum Assemblies haven't been manufactured in 50 years...... These Hubs should be all over the place, from people who have done Disc Brake conversions...... Put out a wanted ad in the wanted section , and you should get an answer / offer within 48...

^^^ Beware : watch those internet listing--- some of them are very very wrong..... ^^^^ It is bad enough that they are all Chineseum warpable drums...... I have *** N.O.S. *** U.S.A. made *** Brake Drums..... P.M. me, as per forum rules, if interested......Craig......

For double to triple the price, you would hope it would be better, for sure.....

For anyone who would like the original 1 piece design, I have a couple last sets of *** N.O.S. *** U.S.A. made *** Strut Rod Bushings..... Not big $$$ , because as some note , they are more problematic to install... I would just rather see those people look e who want them , get them..... P.M...

^^^ Quite Possibly ^^^ The fact that the two in this thread above, ignored me isn’t going to have me lose any sleep… I have them for those who want them —- it’s that simple….

^^^ $ 89.50 each from brads ^^^ That’s pretty reasonable for him —- I was expecting his price being $ 135.00 or MORE …… My *** N.O.S. *** T R W *** or *** N.O.S. *** MOOG *** are $ 69.00 each , if you all would like to compare….. Craig…..

^^^ 1500swinger ^^^ , You say “ I should have a pair “… Is that “ YOU “ have a pair ??? Or you “ should have “ a pair of mine ??? Do you want Uppers ??? Lowers ??? All four ( 4 )???? ( And if All four (4) —- 4 wheel Drum or Front Disc —- they ARE different ….) P.M. me, as per forum rules, if...

1500swinger, You are welcome to my *** N.O.S. *** U.S.A. made *** Upper Ball Joints !!!! & I have *** N.O.S. *** U.S.A. made *** LOWER BALL JOINT Assemblies—- for both Drum and Disc !!!! P.M. me, as per forum rules, if interested ……. ( That jsjs1212 was on the site repeatedly , but never...

He never contacted me….

As many on this site know, I have been the only person / outfit who has had *** NEW ***LEFT *** Handed wheel studs *** N.O.S. *** ONLY *** --- and I have thirty-one ( 31 ) of that particular wheel stud, remaining.... As 99 % of the planet is aware , Napa ( " Never American Parts Available " )...

Back in the ol’ day, TRW and MOOG were the # 1 and # 1A of Front End, or the Crest and Colgate of the toothpaste world…. Either way, they are clearly both “ the best “ ….. I have Both TRW and MOOG at this moment in time….

Have some nice *** U.S.A. made *** Upper Ball Joints, if interested.... P.M. me, if you need or want....

hal9000, Tried to P.M. you —- your inbox is full….

^^^ I did, toolmanmike ^^^ I P.M.'ed Moparmonster with additional information.... Craig.....

The 10 “ x 2 1/2 “ Rear Brake Drum —- IS —- a 5 x 4 1/2… The 10 “ x 1 3/4 “ Rear Brake Drum —- IS —- a 5 x 4 ….. Craig….

1963 - 1972 " A " Body used 10 " x 1 3/4 " on their Rears, & 1973 - 1976 " A " Body used 10 " x 2 1/2 " on their Rears.... Craig......

So, the magic question is what is the width of the Brake shoe..... The Brake Drum is 1/4 " deeper than the Brake Shoe, because the brake shoe does not go lip - to - lip of the Brake drum.... Such that if the Brake Shoe is 2 1/2" wide, the Brake Drum is called 11 " x 2 1/2 " .... ( And that would...

" A " Body Mopars never had an 11 " Brake Drum from the factory.... someone could have done an upgrade to your vehicle.... I have every Mopar Brake Drum --- N.O.S. U.S.A. made at this moment in time.... Craig....

wawarnick, Before you flip a coin, and go with One from cowwumn A or one from cowwumn B ( all of the ones you mentioned!!! ), I have a few last *** N.O.S. *** U.S.A. Made *** 1967 - 1972 “ A “ body PITMAN ARMs…. I have one (1) remaining 1962 - 1966 “ A “ body PITMAN ARM….. P.M. me, as per...

Hey 340six , Did you enjoy the FREE egg roll with that purchase ??? It is critical to get that free egg roll delivered, excuse you can't stop your car until a quarter mile past a Chinese food place.......

^^^ Keep in mind, that is all the cheapie Chineseum garbage ^^^ that will rip up your Rotors to smithereens as it " attempts " to stop a car..... If you love your car, you don't dare use that garbage.....