Search results for query: *

64 Belvedere, went to start, cranked for 30 seconds then no crank, nothing. Nothing as in nothing electrical works. Traced everything, pulled bulkhead connector apart and cleaned. Power to starter, bulkhead on both sides, ammeter on both sides, fusebox, ignition switch, fan switch, brake light...

84 Ram, Mopar 5 pin ECU, crank/no start. Everything new 9k miles ago, not that it matters. Hit it with the pressure washer the other day, started it up after to dry it off, parked it in the sun for the day to dry. Left the doors open to air it out, came out to start, dead battery. I forgot the...

Unable to locate a definitive stupid gauge question answer. Want to order gauges in the same size as in the pic, but what size is it? Diameter measured at the back (blue), the black bezel (red), or the glass (yellow)?

Ammeter eliminated, headlight relay kit installed, have MSD ready to run, rewiring a few other items, adding 60 amp Denso alternator, other modifications - thought there had to be a better way to deal with the ammeter, fusible links, fuse box. My fuse box has 5 fuses (dash lights/hazard, stop...

So, I'm driving home last night and I started bragging about how great the headlights are since I bought the relay kit from a FABO member, and added Sylvania 9003 H4 headlights. Hit the highbeam switch and they immediately dimmed, clicked them off, back on and both went out. Low beams work fine...

67 Barracuda- trying to solve a wiper problem that is affecting the reverse lights. 67s came with the variable speed motor (2822962) and switch (2770378). Mine has a variable speed wiper motor, and the switch was apparently replaced with a 2 speed wiper switch (2820525). The 2 speed...

Why the heck are the reverse lights and the wiper switch conjoined twins? When the reverse lights don't work, the wipers do not work. With the car in reverse, if I turn the wipers on and off until they work the reverse lights come on, or if I mess with the shifter the wipers come on. If the...

Why is it, that when I put the 4 speed into reverse, the reverse light come on, then go off- if I wiggle the shifter I can hear the switch on the tranny, and the wiper switch clicks. If I turn on the wipers, the do not work at first, then once they come on the reverse lights come on. I have...

I just replaced all of the wiring in my car, including everything that goes with that- light bulbs, H4 headlights, flasher, upgraded voltage regulator, alternator, etc. I even grounded all the dash lights separately, which made them a thousand times better. I ran a wire and grounded the...

According to the wiring diagram the fusible link wire goes from the bulkhead to the starter relay. I can find these on e-Bay, but they are not for the a-body and are too short. Who sells the correct fusible link wire? Or, is there a way to make one?

I want to buy a new set of cables for my BB Barracuda. The problem is the prices are ridiculous. I've looked at many different cables for many different body types, years, small blocks/big blocks, etc. - What is the difference exactly? I can't see spending $180 for a positive cable for my...

I had a working heater, but the fiberglass was shot. I was able to get a complete working heater from a FABO member. I finally switched them today, and the fan does not work. So, I checked the wiring diagram: 1 black wire from the fuse box to the fan switch, then a green and brown wire from the...

Where can I get a new emergency flasher switch for a 67 Barracuda? Mine does not work all the time, and it will work when the switch is up in the normal position, and when down.

I have a Superior 500 wheel, and I think it is missing something to make the horn work correctly. From left to right; the plastic assembly that bolts to the colume with a copper ring and a wire attached, then the chrome bezel that covers it, then the wheel itself, then the piece the wire...

OK, I searched and found some info on an ameter, but I am still confused. I have a vintage SW ameter, 2 black wires on the back. It might just be that I do not know the terminology that is causing the confusion; so how do you connect an ameter? Are there additional parts needed?

I have a rally dash, and I am having an issue with the smaller circuit board on the left- the 2 upper bulbs will not light. This is the board that has the lights for the high beam indicator and 3 dash lights for the speedo. I have tried 3 different circuit boards, multiple bulbs, cleaning the...

Can someone id this radio? What year and what model it came out of? There is only one set of numbers on it: 15D42183C01

Does anyone have a complete set of dome lights for a 67 fastback? I need everything except the light covers: wiring, plastic bulb holders, and even the bulbs so I know what the replacement ones would be. I found a junkyard in Arizona that has it for $100; the only place I have been able to...

I have a 67 Barracuda and it is missing the dome lights and wiring. 67 has one on each side, they cannot accept a regular bulb or bulb assembly, the bulbs look more like glass fuses than light bulbs, and the bulb holders are plastic/metal and clip into the base of the dome light from behind...

I have a 67 Barracuda with a map light hanging down from under the dash. Does anyone have a pic or know where this thing is supposed to be mounted? There is no console, it has a bench, if it matters. Thank you.

67 Barracuda, gas gauge does not work. Questions: How can I test the gauge and sending unit? If both work, how can I bypass the existing wiring in order to wire it myself? A new harness is out of the question at this point and playing the 'how much is in my tank' guessing game is eventually...