Search results for query: *

  1. Slantsix64

    360 Magnum valve train noise

    Running 20w50 would make it tick louder, thinner oil will lube up the top end faster. I would run 5w30 Conventional. One thing you have to remember stock magnums had a **** load of preload Hughes recommends .090/.120 preload.
  2. Slantsix64

    318 1/8 time improvement

    I heard about draggy app honestly I live on a boulevard. Its like drag race city on fridays lol Do you think a 650 or a 750 double pumper would be a better choice. I think just the switch over from a vacuum secondaries Holley 600cfm to a double pumper would help my 60ft.
  3. Slantsix64

    318 1/8 time improvement

    8inch converter? 12.60? How did you not overheat your transmission? Surprised that 318 could pull that much stall.
  4. Slantsix64

    318 1/8 time improvement

    Ya I know, but at least they opened a 1/16 track less than a hour away.
  5. Slantsix64

    318 1/8 time improvement

    You guys done comparing your peckers? Anyways, thanks for the reply @318willrun I guess they made a street legal 1/16th of a mile drag strip. There is a tree there and you get time slip, no prep on track. I guess 330 ft is the whole race. I’m going to find a used 650 or 750 double pumper and...
  6. Slantsix64

    [FOR SALE] 64 Dart GT Parting out.

    How much for the shifter ball?
  7. Slantsix64

    318 1/8 time improvement

    Thanks for all the help! All you dudes lived through a badass time and era. Where fixing up a muscle cars was the norm, getting into fights was not a big deal. Wish I would have took advantage of the track next to my house. Never thought it would go away, until it did.
  8. Slantsix64

    318 1/8 time improvement

    Update! I ended up swapping in a used 5.9 magnum engine, with a reground camshaft and ported the heads in my backyard! I didn’t have so much time to tune it with carb and timing curve because they were closing the drag strip in a month. But regardless I was pretty happy, was hoping for high 7s...
  9. Slantsix64

    LA 318 advice

    Magnum Swap -your source for Mopar engine swap information.
  10. Slantsix64

    Guess my age! I mean mileage!!

    No I couldn’t, I bought my tech card off someone at the gate, didn’t get their name so I couldn’t get one. Since they had the names of the ticket purchaser, on the plaque.
  11. Slantsix64

    Guess my age! I mean mileage!!

    I ended up getting a tech card at 11am, bought it off someone who couldn’t make it, and called off work lol. Was worth it.
  12. Slantsix64

    Guess my age! I mean mileage!!

    Finished the motor up runs strong! Gets about 12-13inch of vacuum . It had a little lifter tick but after driving it, it smells to have gone away. Ran a 8.3 at 82.77MPH in the 1/8. Pretty sure I could have made it into the 7.9 range if I had more time to tune! But of well. 1.876 60ft 5.359 330...
  13. Slantsix64

    How to physically see and feel a bad roller lifter

    Yeah I know I’m on the same boat, might just swap them all out for a new set, if the the shorter rods don’t help.
  14. Slantsix64

    How to physically see and feel a bad roller lifter

    Thanks for the response! Kim I did the garden hose tech and it sounds like it’s coming from both sides. I removed the valve cover, there’s no slop pressing the rocker tip down, although I feel some side to side on 2 rockers. I’m thinking I might of added too much preload, not allowing the...
  15. Slantsix64

    How to physically see and feel a bad roller lifter

    Hey guys I got a tick on my driver side on my 5.9 magnum, wasn’t there until I started driving it after a hour. I pinned pointed it to the driver side rear lifters cylinder 5/7. I have a extra set I wanted to ask how could I tell right of the bat these are the ones making noise? Would they...
  16. Slantsix64

    Anyone Running the Oregon #1341 Regrind?

    I have that cam grind it has a noticeable idle and lope pulls about 11inch of vacuum hauls serious *** 5.9
  17. Slantsix64

    [FOR SALE] 273 commando valve covers

    Used and oiled Correct for 1966. $200 plus ship paypal only
  18. Slantsix64

    [FOR SALE] Magnum head 318 Roller block

    Selling this 1988 LA Roller block with Magnum heads, four barrel intake, Oregon cams roller grind 264 duration with .453 lift. Motor runs great lots or torque. Does not come with carb valve covers or water pump/pulleys alternator Have video of it running, and video of it running 8.5 sec @ 79...
  19. Slantsix64

    Guess my age! I mean mileage!!

    Better picture
  20. Slantsix64

    Guess my age! I mean mileage!!

    I got 17 days until show time, it’s going to be a greasy sweaty 17 days lol.
  21. Slantsix64

    Guess my age! I mean mileage!!

    Waiting on some pushrods, used my checker got all the slack out at 6.962 adding .050 for preload ending up with 7.015
  22. Slantsix64

    Project Cheap & Nasty Updated With Back Story

    My old neighbor told me they would chain cylinder heads and pull it down the street with the tail gate open and his buddy siting on the tail gate using his feet to push the cylinder head down lol cheap head milling.
  23. Slantsix64

    Guess my age! I mean mileage!!

    Just an update! Got my heads back from the machine shop ready to bolt on. I was thinking of installing the 5.9 with out the cylinder heads into the car, so it would be easier to get the bolts on the back on the engine, and less of a chance of messing up my long tube headers? Also I have exactly...
  24. Slantsix64

    [WANTED] Stock 5.9 magnum flex plate

    I seen a couple reviews on Amazon, one guy said it cracked after a couple months. That’s why I’m questioning them.
  25. Slantsix64

    [Found!] Mopar small block 318 block timing chain cover

    Looking for something not cover in grease lol can be later cover 1970 and up shipped to 91770 thanks!
  26. Slantsix64

    [WANTED] Stock 5.9 magnum flex plate

    I heard bad reviews on them cracking
  27. Slantsix64

    [WANTED] Stock 5.9 magnum flex plate

    Shipped to 91770
Back
Top