Search results for query: *

Yeah, 14 years all the sudden I don't feel so bad lol.

Thanks for the info. I do plan on doing mods to the car over time. As money allows. I was going to start with the small easy parts first that don't cost a lot of money First. Lol that's why I was interested in your throttle body. I do want to do cam, long tube headers etc. Just trying not to...

sure. if the system is in tip top shape and dialed in. however, you'll likely gain nothing from it and just wear out the ignition components faster. stick with 45 and you'll be fine.

Think it was low 50s out when we started so I’d guesstimate 43 in the building. Wasn’t bad till you hit yourself with a hammer. :rofl:

it's one of those things that it depends on what you're doing with it and what your end goal is. if you have a light car and you want something peppy that gets outstanding mileage, then they're great for that. anything else, not so much. the main benefit is that you don't have to change...

Brand new Molnar Technologies 3.79" Stroke 360 Main Crankshaft. 2.125" Mopar Rod journals. 6.122" min. rod length. 4.030" Bore x 3.79" Stroke = 387 Cubic Inches On the shelf and available to ship within 24-hrs. of payment on business days. I can sell this delivered to your door in the...

Still available Tom

Still available Tom

But they should have a round medallion (IIRC) glued / attached to one side of the block

man i was there in august and nearly needed a sweatshirt, i can't even imagine how bone chilling it musta been today!

i heard .045 gap on the plugs? can i really go to .060?

yes but i dont hav e an a body. someone left the door open and i snuck in. (dodge van). you fols know the small block, wish i had found you last year

the #3 is aviation form-a-gasket and works great in applications such as this. it's PN 80019 (4oz bottle w/ brush cap). i'd recommend this over the copper spray. you could also use p-tex #2 or hylomar just none of that silly-cone near the gas.

Im interested! How can i contact you?

Spring Fling 37 May 3 & 4, 2025 Woodley Park, Van Nuys CA

I just called Wheelsmith today with some questions I had for a project. Very helpful they were.

That's awesome!

@RAT ROD AL

No, not every E core coil will wok with HEI. Some are designed for CD ign, not inductive like HEI. You do not need to run a separate ground wire with this conversion. I have done LOTS of these & on different brand cars. Roughen the mounting feet on the dist clamp. I use a cut off wheel & grind...

This is the license plate holder

575.00 shipped to the lower 48

[1] Do not use silicon that will be exposed to gasoline or gasoline fumes. The sil turns to jelly. [2] The pressed bead in the bathtub gasket should, by itself, seal the intake/heads. If you want to use an extra 'gasket' Permatex #3 or #4 [ non-hardening & hardening ] would be good. A very old...

Take care of yourself John.

If not I can measure mine tomorrow

Uncle Tony . .... :poke:

Hi All , I’m looking for a Mopar Performance Air Cleaner Please let me know what you got .