Search results for query: *

The old boxes were half gallons. 64 oz. These plastic containers are 46 oz. (.3459 gallon) and they have been used for years now.

The factory would have sprayed the whole thing blue and the exhaust manifold paint burnt off.

@Dana67Dart What are your dimension limitations?

Barracudas need a good offset, not as much room at the front of the fender as a Dart or later a-body. I had 2 different sets of Cragars on the front of my 67 Barracuda, and it has the stainless wheel trim, neither rubbed: 14x6, 4.125 bs, with 215/70/R14. 14x6, 3.75 bs, with 205/70/R14. Now I...

Seat adjuster knobs

What ecu was on the Cuda? I didn’t say “all” aftermarket ECUs were good.

Local Amish butcher shop sells butter pecan in 3 gallon buckets

Why have I not previously known of the Henry Supreme!!???

I've got an 05 Ram that is 20 years old. It has 4 oxygen sensors, one just went bad and I was lucky enough to replace the right one. In the 20 years never failed to start. I had one EFI go bad on a 71 Cuda and it was the ECU that went bad, again truck flat bedded home. Next day started fine, ran...

Usually means the container is yet again, smaller

My understanding is that it does. At least that was Leanna's explanation if I remember correctly. Since the clear has no pigment of it's own, it yellows over time.

What does Steve Morris say? Boost fixes everything. Or it breaks everything. Either way it's cool. Something like that. But I am enjoying the build. Keep up the good work.

Right. All the Chrysler stuff was given advertised.

Can a bad voltage regulator cause the alt gauge to be buried..?

Four speed console side bulge.

Evans are Excellent and last too! ✌️

Ok so I took some stuff apart Me and my dad where thinking we were going to bypass the bulkhead

Nestle Kit kat .

Start making main bearings if you want something that will be profitable and sustainable. Because in a few more years there may not be any to be had. Tom

We do offer the SBP Kelsey-Hayes rotors. As a result of feedback from our customers, all of our stock has been sent to a machine shop and properly clearanced so the calipers/brackets fit like they should. These are in stock and ready to ship. BW-12163005, $149.00 each, Rotor for models with 4...

Swanns original Rocky Road

@Unconventional you safe from that inferno

I know Oregon Cams can take a stock 5.2 cam to 212/220 .485 / .506 (1.6 rocker ratio) with 110 LSA. I have one, it's their #1280 grind. I'm very happy with the power. I used the Hughes magnum spring kit, Magnum air gap intake, and headers. After machining heads, deck, cam and a thin head...

Check the back end of a Bic pen...

Only time mine didn’t return to the top is when the clutch linkage bushings wore out and it was grinding metal on metal.

Butter Pecan or "Buttah Peekin" if you desire.