Search results for query: 15x6

Hello, 15x6? and 4.5" bolt pattern? If so, what is the total with S&H to Chandler, AZ 85286. If shipping Greyhound, Mesa, AZ 85211

i got two small bolt pattern 15x6 rims with brand new tires less than 1 mile on them. 250.00 with tires 4.25 back spacing perfect or abody front tires paid wayyyy more than that. located in so cal 91770. will be at the fall fling if wanna meet up. will post pics in a sec.

...I'm considering switching to a 4-speed or 727 (haven't decided), 1 5/8 TTI headers, 8 3/4 rear with 3.55 gears, 27" tires 15x8 in the back and 15x6 front, also considering moving to 18's. My main thing is I don't have the knowledge to match parts to what I would like an engine to achieve...

Stock factory offset for the BBP disk brake wheels was +6. That’s a 15x7 with a 4.25” backspace (cop wheels) or a 15x6 with a 3.75” backspace. With a 15x7 and 4.25” of backspace you can run up to about a 225/60/15 without permanent modifications. With a Barracuda the wheel opening is a little...

...rim. Ask Crager if they can make a 15x7 with 4.25" custom backspace for you for the front trims. Or if you want a fat 70 series tire, ask for 15x6 rim with 4" backspacing and run 195/70/15's In the back a 15x8 with 4.25" backspacing with factory rear axles (5x4 pattern) tend to allow a the...

...31 Spline Axles WHEELS & Tires American Racing (original 2 pc American Made not the new 1pc Chicom knock offs Front Wheels Torgue Thrust 2, 15x6 Mickey Thompson P215/70r15 Rear Wheels Torque Thrust 2 15x12 Mickey Thompson P315/60R15 BRAKES 4-wheel disc power Slotted & Drilled Rotors If your...

...do they provide? Will a sway bar help a lot in the front for cornering, or will the bigger torsion bars already be significantly better? Im putting 15x6 wheels with 215/60/15 tires on the car. I did also recently switch to Bilstein shocks which are markedly better than the ones that were on it

Finally got the beauty rings on. 15x6 front and 15x8 rear

15x6 front and 15x7 rear. 205/65r15 and 235/70r15 Magnums.

I put new 15x8 and 15x6 from Wheelsmith on my 69 Dart with 235/70 and 205/65 redlines and they fit perfect .

...I may not go with the same size tire that is on them but these are a good start. Tomorrow I plan to hit the JY and see if I can find 2 for the front. If mine are currently 14x5.5 Should I look for 15x6 or 15x6.5's? Here are some of the pictures of the 15 in rim on the rear of my 73 Valiant.

any trouble getting the front rallys to fit? Seems like mine do not have enough threads on the lug nuts, I am still trying to figure this out..Rears fit perfect, trying to see why the front 15x7 wont fit..

I know I've asked before, what tire sizes are on your car? The stance is perfect. I have a complete set, got 'em from Mopar Performance a few years ago. Have you checked there?

Another question to ask , are the rear wheel openings the same between a Notchback and a Fastback. I don't know that answer for sure. 14 or 15x6 will work all around depending on tire size of course. 7" wide may work on the front and should work on the rear. Lookimg for a skinny/fatty 60s look...

My 74. 15x6 and 15x7. 195/65r15 and 235/70r15. Make sure you measure your car just to make sure though.

I have 205/65R15 tires all the way around on mine, and I believe I have 15x6 wheels from Wheel Vintiques. It's been a few years since I bought them, so I am guessing on the width of the wheel. The Dart has a 7.25 rear.

Front 225 60 15x6 and rear 255 60 15x7 are a good combo my brother has that set up.

...1/2" relocation so I can use the OEM repro exhaust system and tips that I have. Can cut housing to custom length. Front wheel openings stock. 15x6 = 3.063" bs 15x7 = 3.75" bs 15x8 = 3.875" bs 15x10 = 4.125" bs 225/70 -15 Diameter= 27.4" Section Width=9.1" Tread Width= 7.2" 235/60-15...

cragar 302's 15x6 w/195/65 on front and 15x8 w/235/60 on the rear

...I'm 100% certain this is due to the car sitting too low (I need to adjust the t-bars) and the suspension is the original stuff from 66 so its pretty tired. I'm using a 15x6 wheel, steelies from Wheel Vintiques. I agree with duster2, a 15x7 in the front is pushing things pretty hard for an...

Bought two from Summit this week.

I've got 15x4's on the front of mine.

I asked because I narrowed my Ford 9" a tick narrow at 51 1/8" so I know I'll be close there.

Thanks, Im undecided if I wanna keep the 15x6 fronts or find some 15x7's to replace them.

any of you guys get a 235 70 15x6 with 4.5 back spacing in a early abody? In the rear of course.

...straight down to the wheel mounting surface, the measurement at the edge of the straight edge is your backspacing. If they're brand new and 15x6, they're probably these, which have a 3.75" backspace (+6 offset). Wheel Vintiques 69-5612334 Wheel Vintiques 69 Series Chrysler Police Black...

Ya I saw them too , they dond change the dementions from rotor to fender on any size its all taken out of the back , no good for me .

...it a great driver.. I think it revs around 2000 rpm at 70-75. The skinnies up front are OK, I’m just careful around turns and corners. Maybe put 15x6” up front for the street. There are small thing to improve, found some burned wires due to the headers. They should have installed straight...

Looking for a pair of 15x6 or smaller aluminum slots, OR old steel chrome slots. Need to be 5 on 4.5" bolt pattern. PM me the details. thanks, FABO

You are the man NBLU, thank you so much for your reply