Search results for query: *

Used Turbo Action Cheetah SCS Mopar shifter 70001B with optional shifter cover 70059A, both in good condition. Includes shifter hardware installation kit 70220 (kit is complete except for Cheetah park/neutral start switch, which is not needed if your car already has a working neutral safety...

Hey! You fellow Aussies please chill out ! Our Valiants are USA beasts, not australian and they are not those Holdens that the sheep are driving. You have to understand that all parts are expensive but don't get carried away as us aussies earn a lot more in our pay packet than our yank...

This is exactly why I went with an Edelbrock PF4, no regrets with this EFI system either.

They’re welded on both sides of the crossmember, in the front and in the back. I’m not sure exactly how it was done, the front welds are usually much cleaner than the ones on the backside. But both sides are welded around the entire circumference, or were supposed to be with the usual wide...

the FSM gives it as center to center however, i don't know how you're going to measure it to double check without a yoke in the trans? i mean, unless you have a spare. and remember to have all 4 wheels down with the weight of the vehicle on 'em when you measure. the one thing i've learned in...

:rofl:

Not Little Red.

It's not the shop or communicating with them that's an issue. Sorry, my first post wasnt really clear.. My question is if the numbers given in the Factory parts/chassis manual is an overall length, center-to-center measurement, or some other nebulous choice, like tailshaft seal lip to rear...

There is a long pan and a short pan where it seams at the rear seat. Had a 67 2 door Dart, that looked like the short pan would work with that car. ☆☆☆☆☆

I would never run a 22# flywheel in a 3700 pound car. You need the inertia to get it rolling. I would just get a steel 30# unit and call it a day. I think you'll be very sorry if you go with a 22# unit. Tom

I’d be honoured to park next to you at a car show!

:welcome: from :canada:

Not in Pacific Palisades. Too much money and power to oppose that. The 3 million dollars homes there form a buffer for the really expensive stuff more north in the hills. Usually they don't rezone after a fire like that around here. Lot of like for like. The permits are usually more lenient on...

388 to go

5409RC-23 is on the box. I don't have the invoice. Call and ask for Kiersten. https://gopnh.com/

Unfortunately, the area will probably be rezoned for apartments and condo's, multi family housing is the wave of the future in the bigger cities. rack and stack. I heard on our local news channel up here in N Idaho that some of our fire fighters are there and heading there to help out. Fire...

low speed idle enrichment screws not having any effect on how it idles means your idle circuits are still plugged. Back in the Ultrasonic Cleaner with a couple tablespoons of Pinesol and hot distilled water. Turn on the heater for the Ultrasonic. 15 minute interval cleaning cycle. Being...

Edelbrock Carter AFB ,AVS type carbs are made by them.

Don't do it!!!! Purchasers are known to contract severe symptoms of Holleyitis...often incurable.

Unfortunately you might have to cut it out with a cut off wheel, draw your line and start cutting pieces out . I've had to do a lot of cutting like that and it just takes time and be careful.

The problem with triple carbs is.....that you can get 3 times the problems that you can get with a single carb. The engine is getting idle air from someplace other than the centre carb, hence the t/blades nearly closed. Make the t/blades in the end carbs are closing fully & not adding air. Make...

Do you have a part number for that ?

1. why did the tofu cross the road? to prove she wasn't chicken. 2. how fast is milk? it's pasteurized before you know it.

You might want a mod to move this, this is the welcome wagon, it’ll get more responses elsewhere.

Agreed ! Kind of like making fun of victims and their loss during hurricanes, tornadoes or other calamities, ugh !