Search results for query: *

I have for sale the front clip off a 71/72 dart the fenders are 72 but the hoods, extensions, grille, and valance are all 71 I planned on shaving the marker lights but found a different front end. So here is the list I have 2 hoods one is a fiberglass and one is steel I have both front fenders...

I am selling the following parts for local pickup i am located in shelbyville il hood support $ 25.00 obo drivers fender needs some work $ 40 obo pass fender $ 50 71 duster driver fender $ 60 71 dart fiberglass hood $120 spare tire tub and filler neck $50...

ok I bought new springs and installed them with new shackles and and all new bushings but I measured and one side is moved foward 1/4 inch to the front so after measuring from the cross member to the spring mounts one side measured 57 7/8 inches and the other measures 53 1/8 inches so i measures...

got my hood from anpother member that got it from small block so here is my third hand hood that needs some work but is a really great start. just thought id share. shiifty

well I took the car around the block and I have an itch to get the car finished now. I need to get glass in it still and finish the rest of the body work but man it is a tire shredder. :burnout:no action shots but her are some of the work I did to it today!! just thought...

well Ive been in school for about 5 weeks now and today I learned how to figure the weight of an object. so I figured I would share that with anyone who wants the info. If you want to figure out what your car weighs you need to put chalk on the tire with the car in the air then let the car...

Hi all I recently had a charging problem where the car would not charge unless the feild wire was grounded out ( overcharging ). so I bypass the ampmeter ( I elimanated it anyways ) and go strait to the battery and one other wire to the igntion so I could start the car. so after splicing and...

Hello all I know this will start a debate but I have a 383 with a doug herbert cam the lift is 480, and stock bore doing the math I came up with aprox. 580 cfm carb so I just rounded up to 600 cfm. I want to know what I should use and what experince you guys and gals have had with this delema...

I have a stock bore 68 383 with flat top pistons the cam is a doug herbert cam with 480 lift 108* lobe seperation. what would be the starting point for timing? I could really use the help if the timing is on we will start looking to see if i have an intake leak just trying to trouble shoot...

Hi guys and gals I need some help I have a 1966 727 that I changed the front pump out on and the input shafts but I have a 76 I used as a donor I just wanted to know if the valve body will interchange? thanks shiifty

I have a problem I need a cam for the dart its a 383 bb but Ive heard that tappet cams as of lately have had problems with flat lobes I was thinking roller but cant find any thing budget friendly. I was wondering if there were any cams that are not as prone to flat spotting or a good roller cam...

I was on a little hiatus so I just figured I would start pestering you guys and gals again. part of the reason I was gone is school I had machinist training for work I'm not a welder anymore:cheers: !!!!!

hi guys and gals I have two trannry one is a 66 bb tranny the other is a 78 sb tranny can I take the guts out of the 78 and put them in the 66? I ask this because it opens up torque converter options and the 66 is weak. thanks shiifty

I just bought an 06 (brace yourself) chebby 1/2 ton 4x4 with 38000 miles today nice truck I know I will get grilled for this but I couldnt find standard cab long bed 4x4 dodge that I liked. so here is the truck sure do have to say they do make some nice trucks from what I have seen so far...

hi guys I bought a 383 awhile back I want to check the clearance on the rods and mains but all I can find is in my old mopar performance it calls for .001 - .025 for mains but I cant find anything for the rods. any help is appriciated. thanks shiifty :read2:

just went up to Springfield today and got my short block Ill post pics tomorrow all redone for cheap like 500 bones cant wait to get it together and get it in the car guy needed to get rid of it and I needed one so it worked out great. Ill keep you posted is this hole supposed to be...

hi guys I have two motors that I am looking at getting one is from a 68 dart but we dont know what it is 273 or 318 the other is a 318 from a 93 dodge van I know that the 93 would be a better option but I dont know if I can get an intake to work on that motor and I dont know what it would cost...

I found a 413 motor with a 74 440 crank and balancer he wants 300 for it it has no ring ledge and no cracks this is just a short block no heads or intake it also has a 3 bolt cam I have tried to find it in my direct connection book and my mopar performance book ( its old but been good up to this...

well I have been here a year so I guess I should post this resto here this is the car a year ago I put doors on it this weekend

I got these form a ford guy for free lots of cool stuff

I need to biuld a motor for my car I already have a 383 but it needs a complete overhaul I can buy a 440 for around 150 dollars but its a basket case this is just going to be a street car with about four track events a year. I know that the 383/400 motors are lighter but I was thinking about...

I bought a transmission from millineum transmission and have not recived it yet I was wondering if the company has closed and ran off with my money I have a snaeking suspision they did and just wanted to know if someone lived close to or lived in gilbert AZ and see if the doors are still open...

can I remove the oil pan with the engine in the bay so I dont have to pull it or does it have to come out? thanks shiifty

well today was the fourth year for the girlfriend and I , so I decided it was time to pop the question. She said yes :cheers: after she wiped the tears from her eyes , we went to dinner I just thought I would share with my other family members. I'm still excited:-D

hello everyone I was just reading some posts and thought I would share what made me come here from big block dart. com first of all was the suggestion from small block and second was the friendly atmosphere no name calling, finger pointing ,or major arguments. I have been a member of this site...

here are some pics the other car is in the for sale area I am parting the white one

I bought a 64 barracuda to day the guy has a 65 barracuda and a 67 valiant 100 he is asking 250 a piece for them both have titles I will be stripping the 64 I bought but the blue barracuda is still for sale here are some pics the valiant these are in central Il the...

here are some pics

I found a 65 barracuda and a 64 barracuda for parts and a valiant thrown in for the fee of getting rid of it I think I can get the two barracudas for less than a grand I still have to go look at them but I just want to hear what I should be looking for thanks Joren

I will be taking the drive shaft out but are there any other hang ups in doing this ?? the car is a 66 new yorker.