Search results for query: *

I have a 76 d600 with a 318 and I am in need of a radiator. Locally none of the parts stores can even look up a d600. Highest they go is a d300. Does anyone know if the d300 and d600 share the same radiator, or where to get one? Thanks

I know a guy trying to find a driveline vibration and he is running out of ideas. He has a new rear axle, new mounts, tci transmission and a new driveshaft but hasn't found the problem yet. So I was wondering how noticeable are the vibrations if you put a neutral balance converter behind an...

I am in need of a new fuel tank for my 72 dart, and rock auto has the best price that I have found. It is a spectra premium tank. Has anyone used one of these, and how is the quality of them?

I think that I am having a fuel starvation problem due to a clogged fuel filter. The motor is a 360 in a 72 dart with an electric fuel pump and a filter before and after the pump. The car will idle fine for however long you want it to, but on my way to work (4 miles) it tried to die as I...

I have been thinking about wiring up a electric fuel pump on my dart with a 360 and an edelbrock thunder 650 avs. The car will sit long enough for the fuel to evaporate making it hard to start. What are some good choices on pumps, regulators, and necessary wiring. Do most of you wire it to...

I got a 2 wheel drive short bed truck manual with an open rear differential as my daily driver/farm truck. I have been nursing it through the snow that we have had this year and would like to improve the traction abilities. I have a set of chains in it for when things get real bad, but they...

I got a 08 subaru forester and I noticed that the a/c compressor was cycling on and off so I added some freon. Stopped the cycling for a little while. Anyway I looked at the fill valve and it seemed fine and then out of curiosity I looked at the valve on the high pressure side and saw it...

How many of yall have one of the old (60's or 70'ish??) wood mopar performance creepers. I have only seen one or two and was just curious if they were a common thing to see.

Anyone got one or know someone who does? I was looking at possibly getting one and was wondering how they were. I have a couple of hundred acres and cattle so yard size isnt an issue. My dad already have a border collie so no herding dog suggestions. I would like a dog that didnt bother the...

I will start off by saying that this question is for a project that isnt mopar related, but out of caster, camber, and kingpin angle which has the most effect on steering effort. Also what are the optimal angles to have the easiest steering?

My car has a 360 in it and it threw the belt off of the water pump and cut it, I didnt realize it until and I was at home (the trip was 1 mile round trip at most), when I realized it the temp gauge was over 260-270 (have sunpro temp gauge in car) and I threw a belt on it and let it idle to pull...

I may be swapping out gas tanks on my 72 dart in a few weeks and I have heard that it can be a pain to get the filler neck out. Anyone got any tips before I dive in. Also is there a rubber ring that needs to be replaced?

Guys i know that it is a ford but I really need some help. My dd 2000 f150 2wd short wheel base was rear ended on sunday on the interstate. I got nailed pretty good and the frame behind the rear wheels is bent downward where the hitch was mounted. I am think that the insurance company will...

Who else is in college taking finals:banghead:???? I know I cant be the only one, and I just wanted to tell everyone in my boat good luck.

Hopefully this is in the right place. Anyway, I have a 2000 F150 v6 2wd and I was at home over fall break when my clutch started slipping when going uphill, it would also chatter/vibrate (whatever you want to call it) extremely bad after getting off of the interstate. So I went ahead and put a...

I posted this in the wrong section earlier today so I figured I would post it in the right section this time. Will the clutch pedal assembly out of a 68 dart with 3 on the tree fit in a 73 duster with an 833 in it. If it does, what other parts would also swap over.

What parts from a 3 speed on the column car will work on a 4 speed car. Both manual trannys

Is there a location on the block that has matching vin numbers to the cars number?

I was thinking about getting this switch from jegs and was just wondering if it would be ok to use on the street and use for storing in the garage so I dont have to keep taking the battery cable on and off http://www.jegs.com/i/JEGS-Performance-Products/555/10305/10002/-1

How can someone keep the goo from the back of the electronic ignition box from leaking out on the fender of a car? Can I make a short steel box to put it in to catch the goo?

I have heard that magnum heads are prone to cracking, and I was wondering If anyone could show a pic of where they crack at. I was toying with getting a set from a junkyard and slapping them on a stock 360 bottom end w/ a cam. And Question number 2, Would it even be worth doing this to a stock...

My brother showed me this on autoblog, and I thought that I would share it with you guys. http://www.autoblog.com/2011/01/12/leading-the-charger-64-dodge-hemi-concept-up-for-auction/

I know that the 71 dart grille will bolt in place of the 72 grille, but read somewhere that the turn signal pig tails were different. How are they different, and will the 72 pig tails bolt in place of the 71's?

Like new 700 dp carb, it only has about 30-45 minutes of run time on it. I bought it earlier this year and put it on and have decided I would rather have a smaller vacuum secondary carb. Comes with chrome dual inlet fuel line. I would like to get 260 +shipping from 28806 for it, I would also...

I was thinking of adding a second fuse box for small accessories such as a tach, lights in a 3 gauge pod, and (maybe but not likely an electric fuel pump sometime in the future). I want all of these to turn on and off with the key. What is the best way to do this. Also I noticed that the fuse...

I have a nearly new Holley 700 double pumper for sale. It has approximately 30 to 45 minutes of run time on it. $270 plus shipping from 28806 (Asheville, NC) They sell new for 389.99 at jegs. http://www.jegs.com/i/Holley/510/0-4778C/10002/-1

Do torque boxes help with stiffening up an a body very much at all? And does anyone have pics of them installed. And are they easy to be fabricated

I have a stock 360 with a mild cam in it and am in need of carb help. I have a new holly 700 dp sitting on the shelf at the house (was going to go on dads 340 but he decided against it), and I also have a thermoquad that just had a kit put in it last week. This is just going to be a street...

I have been reading old threads about bypassing the factory amp gauge. Is this a good idea? If i do this I have an after market amp gauge that i can use, but am unsure in how to hook it up. Can anyone clarify on where the wires go

Is it possible to re-key door locks to match the trunk lock?