Search results for query: *

Hi, Have a Dart 1967 with the new TCI 111100 and just after 100 miles I've noticed fluid leakage. How can I find the rebuild kit? is it sealing rings that I need? any hint how to match the kit and my transmission?

Hi delivered my engine to the shop, and to check everything they are asking the all data I can provide, like the torque for the tightening the bolts (sorry for my non technical English), the diameters, all the data that will help to determine the issues I have (if any) with my crate and...

Hi, have a Dart 1968, made an engine swap to 5.9 Magnum, transmission is 727. torque converter is TCI, after several attempts with the wrong flexplate installed the right one, (B&M SMALL BLOCK FLEXPLATE BALANCED TO MATCH CHRYSLER 5.9 COUNTERWEIGHT), with zero effect, (suppose that because of big...

Hi! Temporary I've bought these kind of wheels: Front is 16 7JJ 5x114.3 ET 55 (with the 5 centimeters "spacers", piece of metal between disk and the wheel) Back is 17 8,5JJ 5x114.3 ET 60 with the 245/40 R17 tyres (looks too low profile) Struggling to find the set of wheels for my car - mainly...

Hi, I've installed Edelbrock AVS2 Series Carburetors 1906 to my Magnum 5.9L (Car is Dodge Dart 1967) and now throttle linkage is not working properly - gas cable is moving to the back of the car (sorry for the description) and Carb linkage should go to the front of the car. what's the name of...

Hi! Starting to build my exhaust system from scratch (have just headers) and looking for the pictures of the exhaust system for my Dart 1967, can you please share how the pipes should be placed, the way how it’s connected to the body, etc? Thanks a lot in advance!

Hi, finally I've started my engine and the car is moving by itself and not by the human force :) I'm struggling to select the right air cleaner (and not sure it will fit) in terms of design and the size of it. I have Dodge Dart 1967, engine is Magnum 5.9L with the Edelbrock 1906 AVS2 Series...

Hi, need this housing for 727 TF automatic transmission. (have a Dart 1967 with the TCI gearbox). thanks!

Hi! trying to understand if I've selected the right distributor for my Magnum 360 (engine from Jeep Cherokee 1998), 5.9L Is this distributor will fit my engine? Summit Racing® Blueprinted HEI Distributors SUM-850048 https://www.summitracing.com/parts/sum-850048 and wires? MSD 8.5mm Super...

Hi, asking for your help again. Looks like I've ordered wrong flexplate (TCI Forged Flexplates 145200) to my torque converter TCI Saturday Night Special Torque Converters 141500 Can you please help me to select the right one? Thanks a lot in advance, don't want to make the same mistake

Hi, I've got an engine Magnum from Jeep Cherokee, 1998 (5,9L), and it was injector engine, now I'm building the carb engine (bought everything) and just realized that my Carter Mechanical Fuel Pumps M60514 will not work as the camshaft has no "pusher" for the mechanical pump. What options do I...

Hi, decided to share the progress over the past 8 years of restoration. Now it's in the final stage, too slow because of long logistics from US and limited resources. If you don't mind I'll share some pictures first, than will add some comments.

Hi can't decode my VIN so far, maybe you can help me? at least to confirm that this short vin is for the mopar's for Canadian market, I'll continue to search there, in MOPAR historical club (factory one) could not help The vin number is 88160121

Hi, in my Dart 1968 2dr HT, I've replaced headliners, with the bows (5pcs), but looks like I have no "adapter" or bracket because the holes in the body to mount these bows are not round, it's rectangle ones. Not sure but looks like this is the detail in the left side in the center of the...

hi! I have 2dr Dodge Dart 1968, and couple months before I’ve bought the wrong rubber, somehow it’s bigger and the whole process is stuck!!! “1968-1976 DODGE DART PLYMOUTH VALIANT 2/4 DR SEDAN WINDSHIELD RUBBER SEAL IN STK” this is the discription from the seller, who made mistake and how to...

Hi! have a manual transmission and I want to switch it to automatic. Dodge Dart 1967. Engine - Magnum, can you please help with the transmission selection? Looks like there two types of 727, with Reverse Shift Pattern or with Forward Shift Pattern, which one I need? maybe some specifics that...

Hi For my Dart 1968 I've ordered wrong SSB-A153-1 from 10` drums to disk brakes conversion kit. Now I see that I have 9` drums spindles and: 1. Should I look for 10` spindles to be ok with SSB-A153-1? 2. If yes - can anyone share where to get it? Checked all placed I know but with no results...

Hi! Asking for a help! Trying to get front brakes conversion kit from 9` drum brakes to a full solution from SSBC. Got two different answers from the SSBC tech, A153-1 and A13x (something) but not sure if this will fit my car. And yes, rims are 5*4,5 I have Dart 1967, 2.8L, Coupe 2D hardtop, 9`...

Spent 3 weeks in USA, California, Arizona, Nevada, Utah and so on, visited a lot of national parks... One impression I'd like to share - I like it! :) Roads (I drived 4.000mi) - excelent! straight, wide and so on! It's a pleasure and boaring to drive from SF to LA :) Cars - I realized that...

Hi! I'm looking for alternative catalogs of "YearOne". There is not so many parts for body. And bottom of my dart body is real rusty. So, better to have wider range of offers from different cataloges (buy from hands is not very easy, I'm from Russia). Thank you in advance for help! P.S...

So, car that brought me here - Dodge Dart GT 1968 Hope I'll handle with picture attached :) My previous work - Chevy K5. PS. I'm in Russia, so probably I'll ask here some stupid questions, sorry in advance! Here it's really difficuilt to find any parts for Dart...