Search results for query: *

FOR SALE - 340 3418645 rods. These were part of a lot of some things I had, they are the last rods I have. These will need to be refurbished. Take out condition. I assume they came out of a donor shortblock and haven't had any machine work done, but I haven't checked any dimensions. Some rust...

FOR SALE - This is an NOS plate system we pulled off of a car in the shop. Included is a full 10# NOS bottle. Original test date stamped is 06/02. Bottle is full, weight is 25.4#. NOS bottle bracket set comes with it. Also included is the 4150 plate, solenoids, purge solenoid, WOT switch...

FOR SALE - I have one NOS 10lb nitrous bottle for sale. It is full - 25.4lbs total weight. Included is a set of NOS brackets. $260 OBO FTF in 17267. No shipping since this is a full bottle.

FOR SALE - Plenty of folks using 2 speeds in their race cars, so... I have a Trans Specialties 8" converter for a Powerglide for sale. Low runs since being freshened. Spragless, Turbo spline, set up for pro tree. This converter will go to 58-5900 RPM behind a 525HP, 3.58" stroke roller cam small...

FOR SALE - Plenty of folks using 2 speeds in their race cars, so... I have 2 Trans Specialties 8" converters for a Powerglide for sale. These units are set up identically and have low runs since being freshened. Spragless, Turbo spline, set up for pro tree. These converters would stall to...

FOR SALE - This is a B&M Holeshot 3000 torque converter for 904s. 10". Part # is 10423. These have been discontinued from B&M for a while. I've had it in storage for a long time and it appears to be uninstalled. $275 OBO. Weight is 27#, shipping will be from 17267 if you don't pick it up...

For Sale - Small block deck/torque plate for LA blocks. Used. Nice shape. Unsure of manufacturer. Has the previous owners name stamped on it. .950" thick. 4.185" bore. Now $220 OBO shipped in a Priority Flat Rate Box.

For Sale - My last OE 340 block. Looks to be in decent shape. Needs a serious cleaning, and has some rust from sitting for years in a non-climate controlled building. Bores measure right at 4.060 but have some rust. Looks like a 6-71 DC. $500 OBO picked up in 17267. I really would like to...

FOR SALE - 2 516 heads, 2 906 heads in various used & unknown conditions. Not matching. $100 OBO for the lot. Picked up in 17267. I really need to have these gone. I'll be in Indy until 12/15. I can meet up or send more pics when I return.

FOR SALE - 360 short block. Std. bore, rusty from sitting. 11-78 DC. Dirty timing cover comes along. Also, a pair of rusty bare 1.88 J heads. $100 OBO picked up in 17267. Really need to have these gone. I'll be in Indy until 12/15.

WTS - I have a pair of 1.88 intake size J heads for sale. These are core castings and will need to be re-done. Some rust after being stashed for years in a non-climate controlled building. Prefer pick-up in 17267. $150 OBO plus shipping if we have to do that. I need to move these so OBO...

WTS - Still for sale is this 360 short block core. Would like to move this. Standard bore, kind of rusty from sitting. 11-78 DC. $75 OBO. Located in 17267, South Central PA. Prefer to not ship. Thanks for looking.

WTS - Still for sale are these W2 heads. I'd like to move these. 3870810 open chamber castings. This set of heads have been cleaned and looked at for cracks. Don't appear to have been run a lot. Some porting work has been done. Has a set of nice 2.02/1.60 SS necked valves, Ti retainers and...

WTS - Still for sale is this small block X block. Need to move it. This is a well used X block. 2 bolt mains. Motor mount tabs have been ground/removed. Bores measure just over 4.120. Has been cooked. A little rusty from sitting. Looks like it may have had a couple of rods broken and got into...

WTS - W2 head. This is a pair of early 3670809 open chamber W2 heads. Sadly, one of them has a crack running across the lower head bolt area. It looks like it may have been tightened down over a dowel pin too long or similar situation. Then was epoxied in an attempt to fix it. Heads are...

WTS - Small block X block. This is a well used X block. 2 bolt mains. Motor mount tabs have been ground/removed. Bores measure just over 4.120. Has been cooked. A little rusty from sitting. Looks like it may have had a couple of rods broken and got into the lower part of 2 cylinders...

WTS - W2 heads. 3870810 open chamber castings. This set of heads have been cleaned and looked at for cracks. Don't appear to have been run a lot. Some porting work has been done. Has a set of nice 2.02/1.60 SS necked valves, Ti retainers and roller springs that may be fine to use. $875 OBO...

FOR SALE - 360 reciprocating assembly. Never hurt, everything in nice shape. Crank- OE 3.58 cast 360 crank - 2.100 rod journals - deburred/polished - internally balanced - ATI balancer with Chevy bolt pattern (should go back to ATI for freshen) Rods/pistons- Crower billet rods - stock length -...

FOR SALE 892-893 torsion bar set, nice shape. $100 shipped to 48 states. '67-'72 small block, biscuit style K-frame. No washer. Nice, take out condition. No floor jack dents or road rash on the bottom. $120. Prefer FTF in 17267 area. Prices are OBO. PM for pics or info. Thanks.

FOR SALE - 360 race short block Block - early casting 72 DC - 4.040 bore - lifter bores bushed - Hardblok tall fill - extensive oil system mods, rocker shaft oiling retained - ARP main studs - interior surfaces smoothed Crank - OE 3.58 cast 360 - 2.100 rod journals - deburred/polished -...

For sale is a factory 340 forged crank. Crank is .010/.010, in nice shape and should be usable at .010 with a light polish. It has been previously balanced for a lighter than stock piston on stock rods. $75. PM for pics. Price is OBO. Part can be picked up in 17267 or I can bring it to Mason...

For sale is a '67-'72 small block, biscuit style K-frame. No washer. Nice, take out condition. No floor jack dents or road rash on the bottom. $150. Prefer FTF in 17267 area. PM for pics. Thanks. Prices are OBO. This can be brought to Mason Dixon on 5/15..

892-893 torsion bar set, nice shape. $125 shipped to 48 states. '73-'76 upper control arms, ball joints and bushings tight, one ball joint boot torn, nice shape $125 shipped to 48 states. Or FTF in 17267 area. Prices are OBO. I can bring these parts to Mason Dixon on 5/15. PM for pics. Thanks.

X block. Nice shape. 4.070 bore, 4 bolt, lifter bores bushed, o-ringed. SOLD pending funds...much prefer to be picked up or FTF in south-central PA/17267 area. Additional pics available. Still available... NOS P4529715 crankshaft, 3.79 stroke, 318/340 mains, 1053 forging, 8 bolt flange, mint...

340 block, 3-21-73 DC, really nice shape, standard bore with zero ridge. I haven't had a dial bore gage in it, but it's likely still usable with a hone at standard bore. Only issue is the threads are pulled in the oil sender port. $400 3 360 blocks, 4006830 castings, all standard bore with a...

I have a 340 reciprocating assembly, that I just took out of a short block I bought awhile back, that I would like to sell. Crankshaft is a 2532457 forging, 3.31 stroke, standard/standard, shot peened, radiused fillets, 6 bolt flange, marked Crankshaft Specialist. I believe it is a kellogg race...

3 standard bore bare 360 blocks. DCs 8-12-75, 8-21-75, 11-8-78. Not the early casting and haven't been cleaned. $50 each. 1 standard bore bare 340 block. DC 7-2-70. Also not cleaned up and stored for years. $400 3 340 cranks. 1 std cast iron, should polish OK. $40 1 std steel probably...

1 small block 727. This came along with some parts we acquired years ago. I was told it was fresh. I took the pan off and it is clean inside, appears to have a stock valve body/separator plate. I didn't take it apart any further. SOLD 1 B&M 904 Holeshot converter, 10423. No longer available...

3 standard bore bare 360 blocks. Not the early casting and haven't been cleaned. $60 each. 1 standard bore bare 340 block. Also not cleaned up and stored for years. $450 3 340 cranks. 1 std cast iron, should polish OK. $40 1 std steel probably needs to go .010. 1 steel .010 should polish...

FOR SALE - Complete W2 top end just unbolted off my 372. Last run in 2000. Early castings. We were conservative with the porting, no epoxy, leaks or repairs. Stainless valves, titanium 10* retainers. Crane Gold rockers, MP aluminum stands. Strip Dominator, matched and cleaned up, water lines...