Search results for query: *

Just an update for all you guys wondering about the shephard radiator. I have been driving it daily since my cherokee broke down with no shroud. It is a mild 360 and i have been up to 190 degrees at the highest. The holes did not line up right away but a little drilling in the radiator mounts...

So im 24 and whenever im showing someone my car or telling someone about it they always say "I went to school with someone that had a dart like that, man was it ugly, and it had this nasty green color all over it" I usually say "well thanks, so you think my car is ugly?" that ends the...

So how would i set my initial timing? is that what the timing should be at idle?

I have a MSD 6al, Billet distributer, 750 edelbrock performer carb, headers, KB 10:1 pistons, Edelbrock performer RPM intake, and the edelbrock performer RPM cam. Will be installing adjustable roller rockers towards the end of the summer. When i installed the cam i didnt degree it in. I just...

It feels like when i am driving down the road and really get into the gas pedal is bogs out really bad. When im in idle and rev it up it revs up really quick and sounds good. I think it is running really rich though because its putting out a pretty good smell and some white smoke (not burning...

So i have been doing alot of reading on here and i think my cam is way to big for the converter i have. I have the eddy rpm cam. Many of you have said that you dont like that cam and i am just curious. I have a 3000 stall 904 with a reverse manual valve body. 3:91 in the rear. Could the cam be...

I am wanting the same thing fstfish66. Interested in what people have to say

or how about this one. It is about 30 dollars cheaper Amazon.com: Actron CP7529 Digital Timing Light: Automotive@@AMEPARAM@@http://ecx.images-amazon.com/images/I/4111W83GRZL.@@AMEPARAM@@4111W83GRZL

I am in the market for an adjustable timing light and found this one on Amazon. Seems like a good deal. Amazon.com: Equus 5568 Pro-Timing Light with Tool Case: Automotive@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41cxTsn9U1L.@@AMEPARAM@@41cxTsn9U1L Has anyone had any dealings with this...

I have a edelbrock 750 and i think it is to large for my car. and it is the cheapest carb i could find. I trust you from all the threads i have read that you chimed in on. What does a rebuild consist of and how easy is it. I am fairly good with my car and knowing how to do stuff but have never...

So i went to start my jeep this morning and it cranked over buy nothing happened. It came up with a message "no bu5" on my odometer. Anyone have any experience with this?

Its the earlier style v8 k frame. it has the biscuts on it. The k frame is in a 74 dart swinger with a 360. I do not have any parts yet. I am really confused on what i really need to do this swap. I have read so many of the swap articles and i think im going crazy.

I have drums in the front currently and have the sbp rims right now and cant afford to upgrade my rims. and i like the way they look. I would like to switch to the disc brake set up but am unclear what i need to do it. Since i have the earlier k frame what do i need to do the conversion? i know...

So i have recently discovered that my k frame in my 74 dart is the earlier style with the biscut style motor mounts. So my question is what do i need to do the swap. Do i need new lower control arms? or do i just need to buy the spindle, rotors, calipers, proportioning vavle and misc. pads and...

I am looking for 74 dart style tail light lenses in good condition. Also could use the bezel that goes around the rear that holds the taillights.

beautiful car

So yesterday on my way home from the garage some kid rammed his bike into the side of my cherokee and dented the **** out of my passenger side door. When i got out to see if he was ok i asked him to wait a minute while i called the police and the kid took off. Im only 25 but if i did that when i...

This sounds like a great idea. I live in Cincinnati and would love to get together with some of you guys. I have been trying to see if anyone would be interested in showing up to a car show my mom runs a Spring Grove cemetery. One of the coolest and most interesting shows there is. and its free.

Ha, so i guess when i put the guages in the pods the wire came off of the terminal for the temp gauge. The small stuff eh. Almost done with the interior. Pics to come soon.

I called autometer today and talked to them. I didnt put tape on the temp sender. Im going to try a few things and recheck to make sure i have the appropriate wires where they should be. Feel like a real idiot if i have them backwards.

If you look at the later model darts on the site there is the v8 radiators. I dont know why they dont have them for 69 or 68's. I have a 74. Look there

Were the stock radiators crossflow? my stock radiator never overheated so i just thought this could be nothing but a upgrade. At the least i can always put on the old on in case of overheating. I just need to get my gauges working now to see how hot she runs.

Thanks for the info. I am getting ready to buy an offset timing light so i can time it up really good. I have all the springs and stuff that came with the dizzy. I believe it has the two heavy springs in it now. Any suggestions. I was thinking a blue and a light silver. along with the heavier...

So i have searched all over for this on FABO and havent found it so im going to ask. I have a 360, .030 over, eddy cam, eddy 750 carb, msd ignition, coil, and billet distributer. The distributer doesnt have a vacuum advance on it. So when i go to check the timing do i need to cap anything? when...

Yes. I spent two hours last night taking everything apart and putting it back together. I guess i should have been more specific. It is a temp gauge and a oil pressure gauge. Does the oil pressure sender need to be grounded? I didnt put it directly on the motor because the manual said not to but...

So i have finally almost gotten done with putting my new gauges in the dart and when i fired it up today my new electric gauges dont work. I bought autometer guages and i hooked the green sender wire to the sender that was provided. Is there supposed to be a wire clip or something? please help.

I am cleaning up the suspension on the dart here in the next few weeks and want to put new springs on the back. They look pretty nasty and i want to clean them up. Where can i get a set of nice ss springs for cheap. I just ordered competition engineering adjustable shocks for all the way around...

still for sale?

still for sale?

Is this still for sale?