Search results for query: *

Converted my car to disc, Selling the drum brake system off my car 67 Dart GT. All new(about 1000 miles on them) photos coming. 400.00 obo

HAS ANYBODY TRIED TO PUT P225/60/14S ON THE BACK OF A STOCK SITTING 67 DART GT WORRIED ABOUT CLEARANCE?

Hey guys, can anyone show me their weather strips on their car? I'm not sure if I installed my right, they're not sealing, never had windows out and the only reason I replaced them is because they were old, now if it rains or when I wash it they leak, I'm a 67 Dart hardtop. thanks

I,m going to do disc brakes on the front of my Dart(67) all drum at this time.It dose have an up-dated master cylinder(dual bail) Do I have to swap out the master again and change the proportioning valve or just the valve with one for disc brakes I am going to use the Scarebird system

Ok, on hot days running in traffic my car will get hot, new radiator, put a clutch fan and 6 blade fan. Would like to install trans cooler. What's the best cooler to use? And I would like to locate some where out of the way and use stainless flex lines. Checked around(Summit & Jegs) can't seem...

guys just found a trany(guy says its for a 413, 62 to 65 ) will this fit in my 67 dart(360 crate engine) i can pick it up for 400.00 and its all new seems like a very long tailshaft and he said it was large spline

Hey Guys. Just became a member of Midwest Mopars (northern branch) A good friend of mine is building a 71 AAR Cuda and is in need of six pack intake and HIPO exhaust manifolds. If anyone knows of anything let me know and I'll put you in contact with him.

So this is my first car show. Was not going to do this(just a driver not a show car. This weekend was the Moorhead Madness/World of Wheels show in Duluth MN and I ended up with this. I'll also throw in a few shots of some of my friends cars

Any one make a good gasket for a 727 trans pan? I've replaced the gasket 3 times, once with a new pan, straight edged the trans and this is good. When the car sits it always drips. In Minnesota and I know temp changes will have an effect. This trans is newly rebuilt and it is the pan leaking...

Ok, this may seem dumb but what is the difference between the standard LA small block and a Magnum motor? I have a crate 360 in my 67. Runs like a top. But the valve covers are different the intake is different. What's inside that's different? I've had my old 69 340 apart so I know what's...

I'm toying with the idea of mini tubs. Anyone? How hard are they? I've herd you don't have to touch the out side of The quarter panel. Yes? --- new paint, can't touch that. Do you have to move the springs? I need bigger tires in back. Any Ideas on this would be great. athanks

Hey guys. Just want to know what are your thoughts? I've got a 413 short block from a Winny, only has 45,000 miles on it. Is it worth while building and putting in my 67 Dart? Or should I use it for a boat anchor? How much work is to install the big block in my car? I've done lots of small...

Well at this point in time I'm done! (for now)

Any one know if RT Specialties is still open? I've called(no reply ) I've e-mailed (no reply) I really need to find retainers for my car. any other place carry these type of items?

Hey Guys. Looking for rocker trim for my 67 Dart GT, I'm looking for the wide trim not the 1" , I'm in Minnesota so mine are kinda beat up/rusted. I've been through about 100 pages of FABO for sale ads and have'n seen anything. I've got the retainers. And the holes are in the body, If you know...

Hey guys.I've called out to every web site I could find for retainers(for belt line on my 67 Dart GT ) By any chance does anyone have any retainer or retainer carcass for the belt line for the Dart? I can make do with just the (per-say) body of the retainer. I've made the stake part(I have 30...

Hey guys. Anyone have a 67 Dart GT? Trying to find retainers for my belt line chrome(runs from front to rear on top of fenders/with turn signals) and retainers for my rocker chrome(large 3 inch) I called RT Specialties today and the guy I talked to said we don't have them. And was kind of rude.

:banghead::banghead:Just installed my ACC carpet(took along time to get that to fit right!) Putting seats back in and wouldn't you know it I forgot to mark the outer seat belt holes. Carpet is glued down(cause of dynomat) can anybody show me or give and measurement on where they are? I've been...

Hey guys. Anyone know where to get replacement seat foam? Redoing the front seats of my car, I have new skins but the foam is flat. I'm putting in 71 Charger high backs in my 67 dart. Need new foam. Classic and Legendary both have them, but money is tight. Any other places to look?

Ok guys. Installing my new B&M Star shifter. Running into a problem. The bracket that mounts to the trans for the cable is too close to the bell housing so there is no way to run the cable and besides that I have TTI headers everywhere. Everyone told me this shifter will work. The only thing I...

Where do you guys find 14 & 15 inch wheels, small bolt pattern. Crager S/S or Centerline ect. I can't seem to find them.Everyone tells me to change to 4.5 pattern??

I would like to find the 68 super stock hood or just the scoop, for my car (love the look). Anyone know where to find them?

Here are a few pictures of my resto. Job, I'm not the best, or have a lot of cash. This is what I've gotten done so far. The first shot is when she came home. Then stripped down.New front fenders(you see there 69 fenders) then body work.sealer.and base coat/clear coat and back to the shop for...

OK. got my new B&M Star shifter and will start the install. Any advise or tips? Seems like a lot of cable to run(5ft).Looks like I'll need to remove the original brace. I am going to use my factory console(somehow-someway) Any advice would be welcome.

Are high back buckets hard to do? Or can your average guy do them? Seat foam needs to be replaced.Should I turn it over to a shop or can this be done. One shop here the guy cuts foam to fit with a knife the other shop dye cuts them with CNC machine, or will the Classic Ind. Or Legendary foam...

I have new covers for my front seats.But is it better to have foam cut and molded from an upholstery shop or are the new foam pads that are sold from Classic or Legendary good enough to use? And the installation guide says its complicated. I did my rear seat,and that was not bad to do.I'm...

Hey guys. Just got back from paint! Car is beautiful!!! Quick wet sand and buff, and back together she goes. But its been 4 years. Can someone show me there trunk seal. Installing a new one and I'm not positive one witch way it runs? Also any tips on installing chrome with out scratching the...

I'm not sure where to post this question? Who's the numbers guy? I would like to find out production numbers. And if possible how many cars were built in my color 1967 TT1, med copper metallic. Has anyone seen the 67GTS convert for sale at a mere 109.000!!

Has anyone out there every tried to set up like a B&M quick shifter or any other type of shifter into a console car? I've got a 67 GT with a console. I don't like the feel. Is there a rebuild kit or a shifter that makes the shifter feel more positive? Not sure if you all understand what I'm...

So when I got my car(4 years ago) I was just going to do a quick strip and have some one do a fast coat of paint. (bought a gallon of tt1 med. Metallic copper) now (4 years later) I'm told , can't use the paint too old. Any body/paint guys out there, is this true? Do I need to buy new paint...