Search results for query: *

Looking for just the top thin trim piece on the rear tail panel in decent shape. as you can see the one shown in picture is pretty beat up. thanks.

Does anybody know what part number i need to find the correct steering wheel button retainer to attach the horn button shown to the wheel in the picture? I cant seem to verify the correct retainer part number for this steering wheel assembly. i have been searching without any luck. It seems...

I need one plastic round plug for the inner fender like the one pictured. let me know what you have thanks!

Took some pics of My Dart and two other buddies at a show last night. We got them lined up just right 64,65,66 red white and blue lol

Looking for a good straight front bumper. I dont want a rechromed one it wont match my 51 year old patina lol. Some where near Erie Pa or willing to ship if not too much? thanks

Whats the deal with these hubcaps? i always thought they would look good on an abody but the discription says 10" instead of the 9" like on the others for darts or whatever. are they really a different size and wont fit our steel wheels? Is anybody running these on 14 or 15" steelies?

i just yanked this 225 and 904 from my 65 dart. Both good running and was told they were rebuilt about 30k miles ago. They both ran great and no smoke from engine and shifted fine. also i have a good 66 904 that can go with it it is also complete running condition with tc. how about 100 bucks...

I need this bracket for my 4 speed conversion on my 65 Dart. Seems to be the same part for any Early A 63-66, I will need it shipped to Erie Pa. thanks! Ed

in need of one reverse light cover passenger side . they seem to be hard to find? let me know what you have lens, whole cover or what. thanks!

ok purchased this 1965 dart about two months ago. the fuel gauge would only show 5/8 when full. I read a bunch of posts on here and read to ground the sending unit wire to the frame and if it registered as full on the gauge the sending unit is bad and the gauge is ok. installed new sending unit...

I am in need of an odometer mine is broken and not functioning at all.

Posting this car for a friend so pm me with your number and i will have Steve give you a call with more info. 1975 Duster originally 360/auto now good running 273 with edelbrock torquer and carb. originally light blue someone painted its current blue but needs redone. Disc brakes front, 8 3/4...

I am in need of both headlight bezels. mine didnt come with either one. I would settle for driver quality or even needing some attention and straightening at this point. As you can see by the pic shes pretty ugly up front right now. I am going to straighten all the other trim as best i can for...

Here is my new project i sold my 66 to the previous owner so i started looking for a new project and i really like the early A's look. I wanted one that was as original as possible showing all its wear marks and patina. I found one in California mostly all original just dented and scratched...

Ok this is the winter for the slant six to v8 swap finally! This engine will be going into my 66 dart. 833 4 speed behind it 8 3/4 no gears yet 355 or 391? haven't decided. Car will be mostly street use would like it to have good street manners but of course the most hp/torque for the money. I...

So i am at a local car show the other night and this guy comes up and is looking at my Dart and tells me he is restoring an original 69 road runner. Cool then he tells me he is going to take out the 8 3/4 and install a Ford 9 inch because "they are the best rears and way stronger than an 8 3/4...

I have been searching this swap but can't find exactly what I am looking for. I am thinking about a 5.9 magnum swap but want to run my 833 behind it. I want to do the same motor as on magnum swap.com carb and all. I got most of the swap stuff on previous posts just wondering about the 4 speed...

I came across this website searching for the show graveyard cars. Its got a lot of foreign cars but i found some sweet mopars and a lot of girls too, thought you might like it. Here is a pic from there. http://thethrottle.thechive.com/

Which flywheel should i use? 1) used flywheel (i already have) out of unknown vehicle needs altered for a 360. Send it to Brewers have it altered and might as well put a new ring gear on it too aprox cost $150. 2) buy this one...

In search of a nice shape front trim bright metal strip. Just like the one in the picture. My Dart is a 170 post and i dont know if the 270 is the same or not. Mine is a little bent up and would like to have a nicer one. If you got one in nice shape send me a pic and let me know what you want...

This was last summers project finally got some time to post the pics. My 12x20 garage wasnt quite big enough for anything but parking really.last winter I did the 4 speed swap in the Dart so most of my time was spent under it. This winter I wanted to have more room so My son and I dug all the...

I figured id start a thread on my latest project. I found some nice patch panels for my 66 rear quarters at http://www.autobodyspecialt.com. My Dart had the typical rust right behind the wheels on both sides. Once i got the paint off i found some holes on the wheel lips too. I will post pics as...

This is the build I am thinking about for my Dart. I have a 72 340 that will be 30 over and a 72 360 crank I will get the mains machined down. Has anybody done it this way. Pros and cons? Trying to do a lower budget stroker build. I saw there is an older post on this build but wanted to see if...

So is there really not a factory exhaust manifold in all of the big block vehicles that ma mopar made that will work on my 66 if I want to put a b or rb in it and my only solution is a custom built Set of headers? Really? Anybody been there done that..you know checked every manifold ever built...

Whats the deal with 10% ethanol in the gas, This guy was chewing my ear off at the last car show saying I need to put an additive in my fuel now because ethanol is eating the rubber in my fuel pump and the fuel lines. I did a search and am getting mixed info but it doesnt sound too good. Any...

I guess this is a sign of the times or maybe Im crazy but I like to watch mopars on ebay for sale and I thought this was one clean car. It sold for less than a grand!!?? really?!http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330547988972&viewitem=&sspagename=STRK%3AMEWAX%3AIT

I just switched over from auto to 4 speed and I cant get the clutch to completely disengage enough to put it in gear. Its a 66 dart with an aluminum od bell housing. I talked to brewers they said it would work if I used a 66 clutch fork with a pivot they sold me. My pedal goes down about half...

I am in the middle of making my dart a 4speed and I was wondering how many other early A /6 4 speed cars are on here? I am using a newer aluminum bellhousing with a non od a833.

Hey I see the pics so I know its possible but what can anyone tell me about putting a bb in my dart I want to run my 833 no pwr steering. Is there a physical size difference between the 383 and 440 or just bore and stroke? In someones pics I saw exhaust manifolds do they fit better than hacking...

collecting all the parts nessecary for my auto to 4 speed swap still would like to find an original cast iron bellhousing and need correct clutch fork