Search results for query: *

Hello Mopar guys, I am looking for Duster full vinyl top trim. Let me know what you got. Thanks guys

Hey guys, What brand booster is this? I got this with a 71 duster. The car was converted to 73 brakes does this look like the right booster? Thanks

I've loaded some pics of the master and the rod Can anybody verify that this is the right rod length???? Also have a pic of how the prop valve is plumbed, Anybody think this is wrong?

Dart. I did the above. When I cracked the nut the brakes were still locked up

I bought a non running project car that already had the conversion on it. I doubt it had been driven with it. It was on its way to becoming a drag car. I kept the spindles and a arms and replaced everything else with new parts for a 73 except the booster, prop valve and rod. I did try the...

already did that. The brakes were still locked up. Anybody know the correct length of the pushrod for 73 disc brakes with a booster on it????

Hey Mopar guys, I need help. I have a 71 duster with the 73 disc brake conversion on it. Problem is my pedal will not come up. If I pump the brakes by hand it locks up the front brakes. If I open the bleeders, brake fluid comes out and they release. I ran it on stands and the back brakes...

Where can you get one for a duster from?

bump

Thanks for the offer guys, I ended up using the original and a stant together. I didn't want to restore another cap. out of paint. Thanks

what year tubes do you have oldmanmopar?

I got one. Thank you Tony

Hey guys, I looking for the upper grille trim for a 1971 duster. It must be nice. I already have one that's dinged up. Thanks Chuck

Hey Guys, I am looking for a 1971 only gas cap. Any help would be great Thanks guys

Hey guys, I lost my brake pedal switch bracket during the restoration. If anybody has a spare please let me know. no brake lights,boo Thanks guys

It appears I have it figured out. I unwrapped the tape on the turn signal sockets and some Bozo spliced the socket wires together to have only one power feeding both circuits on the same side of the plug instead of one on each side. Then the other power from the blinker signal was sliced into...

I ground to the left side of the headlight and it didn't fix it. I see that the blinker plug have been spliced on my car. on the diagram above they show 4 wires going into the plug in and two coming out. Mine has three on the light . They may be spliced wrong since the colors don't match the...

I bought this as a project car and I am putting it all back together. So It wasn't running when I got it. I replaced the cam in the original harness because the blinker tabs were broken. But they wouldn't "click and stay" so I bought a whole new one blinker harness. Before I replaced the...

Hello Mopar Dudes, I have a 71 duster, standard dash and grille. I just installed a new turn signal cam and harness. The turn signals work, but if I turn on the headlights I have no signals and both the blinker lights are lit up solid on the dash. The Hazzards work with the lights turned off...

Thanks, I'm more interested to know what the lenghts were. The car had a steering column in it when I bought it (not original), I'm not sure if the column is collapsed on not.

Mopar Guys, What is the lenght of the steering shafts of power steering and manual steering for a 71 duster? The one i have is 39 inches, its an inch short for my manual steering box. Thanks guys

Thanks Guys, I did say that is was an A/C car, what I forgot to say was the hole was resized and the twin hose holes were plugged. #1 looks like a good spot to run the cable for my B&M shifter. Thanks for the help

#1 is on the other side. Don't the holes for the insulation pegs have the beveled area? #2 and #3 dont have that

it was a slant six auto on the column with a/c #1 is about the size of a quarter and right above the passenger side of the trans tunnel.

Hey Mopar Guys, I bought a roller with nothing in it and i'm trying to put it back together. I need some help identifying holes and brackets on the firewall and frame of a 1971 duster. locations picture 1 center of firewall above trans tunnel. picture 2 passenger engine area framerail...

Hey Mopar Guys, What attaches to the lower part of this bracket?? Driver side on a 71 duster Thanks,

Hey Dart, Thanks for helping me out. You seem to be all over this stuff. Basically I'm building a car from almost scratch. I bought a roller 6 years ago with no motor and no interior. Then it came with a bunch of stuff in the trunk that came from a bunch of different cars. So trying to...

I'm guessing between 330 and 350

Hey Mopar Guys, I have a 71 Duster with a 360 and a stock fuel pump. I just put new 3/8 stainless fuel lines on it. The sending unit is only a 5/16. Is this going to be a problem???? Thanks,

Hey Mopar Guys, I have a 71 Duster with the a01 package. What does the plug for the accesory lights and time relay connection connect to? It's right behind the ash tray. Its a T plug with a black and a black/yellow 2 wire. Thanks,