Search results for query: *

Thanks guys for all the nice postings, I appreciate it. The kit has sold!

Thanks for your kind words and showing the brake setup on your car. Really nice of you to do that!

I should have added in my posting that this kit is designed to bolt right up to 10" manual brake drum spindles, which many A body cars already have. If you have 9" or Disc Brake spindles (like I had), you will need the 10 inch spindles to use the kit. I had a very nice pair of 10" spindles...

The beauty of this package is that the rotors are shipped with two sets of Lug Studs installed. The smaller studs are on 5 x 4 bolt pattern and the larger studs are on 5 x 4.5 bolt pattern. You just drive out the 5 studs on the bolt pattern you will NOT be using. You are seeing what the set...

Bob, Sorry I didn't see your message until now; I am use to getting pm'd on items, so I don't check the thread as often as I should. If you could please send me a pm, I would message you back in regards to shipping item; otherwise, I will post it in a message here if I don't here from shortly...

Sold my 1969 Plymouth Barracuda due to family situation; Was going to install in car but went a different route at the time. This would fit any custom Mopar A body/B body installations that someone might have on their Dart, Duster, Cuda, Valiant, Super Bee, Challenger, GTX, Charger, Coronet...

I sold my 1969 Plymouth Barracuda about a year ago due to a family situation. I was intending to put this coupler on my car, but never did. This is a NEW Flaming River Mopar Power Steering Coupler (FR150P)- Includes instruction sheet, but will have to purchase the roll pin from any...

NEW SSBC Brake Conversion Kit 1963-1972 Mopar A-Body part# A153-2 - I bought this kit thinking I was going to do the big brake 5 x 4.5 bolt pattern setup on the front of my 1969 Plymouth Barracuda, but ended up staying with the original kelsey hayes set up instead and have now sold car. This kit...

1969 Barracuda Front Parking Lights Center Bezel Trim. These are the metal aluminum trim pieces with the chrome front tips that sit in the middle of the parking light lenses. The outer chrome/aluminum trim pieces are in great shape and the two chrome center attachments are in very good shape...

I had to buy two pair of Heater Control Knobs at the time in order to get the correct one's for my 1969 Plymouth Barracuda. I put the one pair on my car before I sold it and I have this pair remaining. I believe they are more specific for 1967 Plymouth Barracuda's; not sure if these would fit...

Update 5/2/14 to INCLUDE FREE SHIPPING in 48 Continental U.S. Only! Thanks

Sold! Thanks

Sold! Thanks

NEW SSBC Brake Conversion Kit 1963-1972 Mopar A-Body part# A153-2 - I bought this kit thinking I was going to do the big brake 5 x 4.5 bolt pattern setup on the front of my 1969 Plymouth Barracuda, but ended up staying with the original kelsey hayes set up instead and have now sold car. This kit...

Mopar A Body Original Driver Side View Mirror with Inside Door Manual Remote. The mirror is in Very Good Condition, but there are a couple of big pits/scars, on the back side of the mirror, in the chrome. Good for a driver or having it re-chromed. Should fit many cars including Dart, Duster...

NEW(other) ARP Stainless Valve Cover Bolt Kit #400-7508- These ended up being too short for my application at the time. Package is opened, all twelve stainless bolts, but only 7 of the washers that came with them. Should be easy to replace washers. Check part# above to make sure they fit your...

Should fit many A bodies including Barracuda, Dart, Duster, Valiant, Demon, etc. but please check your application first. Rear defogger switch with chrome nut sleeve included; looks to be in very good condition. Horn Relay was pulled off my Barracuda part# 2822 461; bracket mount needs a...

Some were leftover from my Barracuda and some were given to me; I have not tested any of them so being sold as is. There are (14) for the price. Should fit Dart, Duster, Demon, Valiant, etc. $15 shipping* included. *Only shipping within 48 continental U.S. states; shipping will be priority...

1967-1969 Plymouth Barracuda Front Passenger Fender Cut Out Antenna area - Figured somebody might need a patch in this area, otherwise I will take it to the scrap yard with some other metal; Metal is very solid throughout, no rust issues. $10 + shipping in Continental U.S., Thanks

I have a left over Plymouth Barracuda passenger door that will fit 1969, 1968, or 1969's. Please note the inside of the door does have the lower vent slot that I believe was found on 67' and 68's but not on 69. I sold my car so selling off last of remaining parts. Door is overall structurally...

Vent window pivots have been sold. Thanks

Large fender cut out has been sold! Thanks

Sold my car due to family situation, so selling the remaining parts I have left. I have other items listed in Member Classifieds also. 1969 Barracuda Front Parking Lights Center Bezel Trim. These are the metal aluminum trim pieces with the chrome front tips that sit in the middle of the...

Sold my 1969 Plymouth Barracuda less than a year ago due family situation. Selling off remaining items I have left over. I have other items listed in Members Classifieds also. Pair (2) Mopar A body Vent Window Chrome Pivots - Complete with rubber grommets and screws. Both are in Very Good...

I had to buy two pair of Heater Control Knobs at the time in order to get the correct one's for my 1969 Plymouth Barracuda. I put the one pair on my car before I sold it and I have this pair remaining. I believe they are more specific for 1967 Plymouth Barracuda's; not sure if these would fit...

Sold my 1969 Plymouth Barracuda due to family situation; Was going to install in car but went a different route at the time. This would fit any custom Mopar A body/B body installations that someone might have on their Dart, Duster, Cuda, Valiant, Super Bee, Challenger, GTX, Charger, etc...

I sold my 1969 Plymouth Barracuda about a year ago due to a family situation. I was intending to put this coupler on my car, but never did. This is a NEW Flaming River Mopar Power Steering Coupler (FR150P)- Includes instruction sheet, but will have to purchase the roll pin from any...

NEW SSBC Brake Conversion Kit 1963-1972 Mopar A-Body A153-2 - I bought this kit thinking I was going to do the big brake swap on my 1969 Plymouth Barracuda, but decided to stay with the original kelsey hayes set up instead. The kit has been sitting unused in my basement for a little while; I...

Kenny, Sorry I didn't see your post until today; I am use to getting a private message so I didn't check the listing. I will see if I have a box to put it in and get back to you ASAP on what shipping might be. By the way I have a few other pics of the fender if you want to see them, just...

I sold many parts last year to a number of members who were all happy with their purchases. I now have a few big ticket items left and some miscellaneous parts to sell, since I sold my 69 barracuda last year. Some of these parts are specific to the 1967-69 Plymouth Barracuda, but some may also...