Search results for query: *

Sold my 1969 Plymouth Barracuda due to family situation; Was going to install in car but went a different route at the time. This would fit any custom Mopar A body/B body installations that someone might have on their Dart, Duster, Cuda, Valiant, Super Bee, Challenger, GTX, Charger, Coronet...

I sold my 1969 Plymouth Barracuda about a year ago due to a family situation. I was intending to put this coupler on my car, but never did. This is a NEW Flaming River Mopar Power Steering Coupler (FR150P)- Includes instruction sheet, but will have to purchase the roll pin from any...

NEW SSBC Brake Conversion Kit 1963-1972 Mopar A-Body part# A153-2 - I bought this kit thinking I was going to do the big brake 5 x 4.5 bolt pattern setup on the front of my 1969 Plymouth Barracuda, but ended up staying with the original kelsey hayes set up instead and have now sold car. This kit...

1969 Barracuda Front Parking Lights Center Bezel Trim. These are the metal aluminum trim pieces with the chrome front tips that sit in the middle of the parking light lenses. The outer chrome/aluminum trim pieces are in great shape and the two chrome center attachments are in very good shape...

I had to buy two pair of Heater Control Knobs at the time in order to get the correct one's for my 1969 Plymouth Barracuda. I put the one pair on my car before I sold it and I have this pair remaining. I believe they are more specific for 1967 Plymouth Barracuda's; not sure if these would fit...

NEW SSBC Brake Conversion Kit 1963-1972 Mopar A-Body part# A153-2 - I bought this kit thinking I was going to do the big brake 5 x 4.5 bolt pattern setup on the front of my 1969 Plymouth Barracuda, but ended up staying with the original kelsey hayes set up instead and have now sold car. This kit...

Mopar A Body Original Driver Side View Mirror with Inside Door Manual Remote. The mirror is in Very Good Condition, but there are a couple of big pits/scars, on the back side of the mirror, in the chrome. Good for a driver or having it re-chromed. Should fit many cars including Dart, Duster...

NEW(other) ARP Stainless Valve Cover Bolt Kit #400-7508- These ended up being too short for my application at the time. Package is opened, all twelve stainless bolts, but only 7 of the washers that came with them. Should be easy to replace washers. Check part# above to make sure they fit your...

Should fit many A bodies including Barracuda, Dart, Duster, Valiant, Demon, etc. but please check your application first. Rear defogger switch with chrome nut sleeve included; looks to be in very good condition. Horn Relay was pulled off my Barracuda part# 2822 461; bracket mount needs a...

Some were leftover from my Barracuda and some were given to me; I have not tested any of them so being sold as is. There are (14) for the price. Should fit Dart, Duster, Demon, Valiant, etc. $15 shipping* included. *Only shipping within 48 continental U.S. states; shipping will be priority...

1967-1969 Plymouth Barracuda Front Passenger Fender Cut Out Antenna area - Figured somebody might need a patch in this area, otherwise I will take it to the scrap yard with some other metal; Metal is very solid throughout, no rust issues. $10 + shipping in Continental U.S., Thanks

I have a left over Plymouth Barracuda passenger door that will fit 1969, 1968, or 1969's. Please note the inside of the door does have the lower vent slot that I believe was found on 67' and 68's but not on 69. I sold my car so selling off last of remaining parts. Door is overall structurally...

Sold my car due to family situation, so selling the remaining parts I have left. I have other items listed in Member Classifieds also. 1969 Barracuda Front Parking Lights Center Bezel Trim. These are the metal aluminum trim pieces with the chrome front tips that sit in the middle of the...

Sold my 1969 Plymouth Barracuda less than a year ago due family situation. Selling off remaining items I have left over. I have other items listed in Members Classifieds also. Pair (2) Mopar A body Vent Window Chrome Pivots - Complete with rubber grommets and screws. Both are in Very Good...

I had to buy two pair of Heater Control Knobs at the time in order to get the correct one's for my 1969 Plymouth Barracuda. I put the one pair on my car before I sold it and I have this pair remaining. I believe they are more specific for 1967 Plymouth Barracuda's; not sure if these would fit...

Sold my 1969 Plymouth Barracuda due to family situation; Was going to install in car but went a different route at the time. This would fit any custom Mopar A body/B body installations that someone might have on their Dart, Duster, Cuda, Valiant, Super Bee, Challenger, GTX, Charger, etc...

I sold my 1969 Plymouth Barracuda about a year ago due to a family situation. I was intending to put this coupler on my car, but never did. This is a NEW Flaming River Mopar Power Steering Coupler (FR150P)- Includes instruction sheet, but will have to purchase the roll pin from any...

NEW SSBC Brake Conversion Kit 1963-1972 Mopar A-Body A153-2 - I bought this kit thinking I was going to do the big brake swap on my 1969 Plymouth Barracuda, but decided to stay with the original kelsey hayes set up instead. The kit has been sitting unused in my basement for a little while; I...

I sold many parts last year to a number of members who were all happy with their purchases. I now have a few big ticket items left and some miscellaneous parts to sell, since I sold my 69 barracuda last year. Some of these parts are specific to the 1967-69 Plymouth Barracuda, but some may also...

LAST CHANCE ON PARTS I STILL HAVE REMAINING. RE-LISTING ITEMS ONE MORE TIME AND WILL WAIT ABOUT ANOTHER WEEK TO SEE IF ANYTHING SELLS. PARTS THAT ARE STILL AVAILABLE FROM LAST POSTING. PACKAGE DEAL 1: IF SOMEONE BUYS THE DOOR AND FENDER, WAS $60; LAST CHANCE NOW 40 FOR BOTH. LOCAL PICKUP...

PARTS THAT ARE STILL AVAILABLE FROM LAST POSTING. PACKAGE DEAL 1: IF SOMEONE BUYS THE DOOR AND FENDER, $60 FOR BOTH. LOCAL PICKUP ONLY. PACKAGE DEAL 2: IF SOMEONE BUYS THE WHOLE LOT OF WHAT I HAVE LEFT LISTED, WOULD SELL FOR $125 (PARTS PRICED SEPARATELY COMES OUT TO $200); LOCAL PICKUP...

:burnout:PARTS THAT ARE STILL AND AVAILABLE FROM LAST POSTING. I sold my Plymouth Barracuda Fastback about a month ago and have several parts leftover that are up for sale. A lot of the parts I have available are specific to 1967-1969 Plymouth Barrauda's, but I do have some parts that will...

PARTS THAT ARE STILL REMAINING AND AVAILABLE FROM LAST POSTING. I sold my Plymouth Barracuda Fastback about a month ago and have several parts leftover that are up for sale. A lot of the parts I have available are specific to 1967-1969 Plymouth Barrauda's, but I do have some parts that will...

I sold my Plymouth Barracuda Fastback about a month ago and have several parts leftover that are up for sale. A lot of the parts I have available are specific to 1967-1969 Plymouth Barrauda's, but I do have some parts that will work with Many Mopar A and Body cars in regards to the engine and...

Due to a family situation and not having the time to finish completing the barracuda I have put it back up for sale. Please note I had previously mentioned the possibility of parting the car out, so this will be the FINAL attempt at selling the car as a whole. Please do not email with parts...

FOR SALE: LIKE NEW MOPAR COMPLETE ENGINE (340+ TYPE SPECS) Asking Price: $3,200 August 28, 2012: I had tried my best to sell my 1969 barracuda late stage project as a whole, but I guess it just wasn't meant to be. Obviously the car is still available and there are many pictures and...

07/06/12 UPDATE: New rear drum brakes installed on the car including Wagner thermoquiet brake shoes, new wheel cylinders, and new hardware. New master cylinder installed, all brakes line hooked up, and brakes have been bled. Engine has been timed and manifold vacuum checked. Transmission lines...

My 69 barracuda setup is a 360 block with j heads and 340 spec camshaft. I have ecu on unit on the car (orange box with mopar original black coil and 1/4 ohm ballast resistor). My alternator, voltage regulator and starter relay are new. The engine is basically new and the car had been...

Although I have put a "ton" of work into this Barracuda Fastback, I have decided to sell it because I just don't have the time nor the drive/desire anymore to see it through to completion. I have a separate webpage setup with extensive information (new parts, work done, etc.) and 30 pictures...

Hoping 67Dart273 will respond to this because you are familiar with my wiring situation that involves a Ron Francis Wiring Kit. I received information from you last night, but I decided that the power stud/junction idea was probably a better way to go because of all the wires that would be...