Search results for query: *

Hi, looking for 71-72 headliner bows (5 in a set) and related headliner hardware. Thanks- Andy

Hi looking for a nice set of 1970 Dart/duster/valiant/scamp oval bench seat headrests BLACK in color. Please message me is you have a pair for sale. Andy

Up for sale are 2 manual steering boxes. Both are from A body cars, black one is from a 70 Dart 340, raw aluminum one is from a 68 Valiant. Both turn freely, unsure of internal condition. The pitman arms are usable as well, they could use new balljoint boots though. Asking $80 each plus shipping

Turbo Action Trans Brake valvebody for sale. I recently purchased this used, but have decided to not install into my transmission. Part # 17999. $320 shipped in the lower 48 states. Thanks

For sale is a factory 340 radiator. This is the correct radiator for 1970 340 darts and Dusters, 4 speed and automatic transmissions. Needs recored as it leaks at the bottom of the core. Tanks are in good shape, the side brackets have 2 weird cuts, not sure if that was factory or it had been...

I have a nice Edelbrock RPM Air Gap Intake that I would like to trade for a Victor 340 intake manifold. The Air Gap has been port matched, but stock otherwise, looking for a Victor 340 in Similar condition. Thanks

Hello all, I have a nice 8.75" 489 case for sale. It has been sandblasted on the exterior, ran through my parts washer, and painted with Rustoleum. The caps have been marked for reassembly, and the adjusters are included. Asking $100 and shipping, for reference I sent one to CA from PA and it...

Hello all, I have several 8.75" pinion yokes for sale. All have been sand blasted on the outside, painted with rustoleum, bolt holes chased, and new Moog yoke straps installed. 7260 10 and 29 spline - $40 shipped 7290 29 spline - $60 shipped I don't have any 10 spline 7290 at the moment. Thanks

I have several factory pinion yokes for sale. They are all ready to install. Sandblasted, bolt holes tapped to ensure they are good, and painted with rustoleum to keep them looking good. I have also installed new Moog universal straps and bolts. I have 7260 fine and coarse spline, and 7290 fine...

11x2.5" rear brake assemblies, (factory hp B+ E bodies) need cleaned up but all there. Drums are in good usable shape. $125 and shipping

11x2" rear brake assemblies for sale. Need cleaned up, but look to be usable. $75 and shipping. Thanks

Looking for a line lock, new or lightly used. Brand doesn't matter, either a whole kit or just the solenoid. Thanks

Removed from a 73 Dart Sport, held fluid until removed. Use it, or turn it in for a core. $50.00 shipped

Hi, I've got a bunch of 273 rocker arms for sale. Have a complete set with shafts and spacers, but some of the adjuster tips are in rough shape, so I figured I'd split them up for anyone looking. The rockers and spacers have been dipped in evaporust, and look like new. Here's how I figured I'd...

I've got a set of BBP spindles from a 73-76 Abody. In usable condition, the spindles have some heavy pitting on the dust shield area and some light pitting where the rotor rides, but were sand blasted and painted years ago. I don't have the balljoint to spindle bolts, or the adjuster nuts for...

Black Steering wheel from a 73 Dart sport. In good overall condition, center cover has 2 chips in it, and wheel itself has a few small marks. $25 and shipping. Thanks

I have a set of black visors from a 73 Dart sport for sale. In decent shape, 1 side has a small tear and some sort of glue on it. Asking $40 shipped

I've got a power steering box from a 73 Dart Sport for sale. Turns over free with no binding, had fluid in it up till I took these pictures. $70 shipped.

SBP backing plates with hardware, need cleaned and painted. 1 backing plate has a flat spot, could be pounded out or ran as it. $50 for the pair + shipping

Parting out a 1973 Dart Sport. Original black/black 318 automatic car. No motor or trans. Most of the body panels are rough, with exception of the doors and trunk lid, they are usable. This is basically a "small parts car" Car does have bbp disc brakes up front that are for sale depending on a...

i have a set of big bolt pattern disc brakes from a '73 Dart Sport for sale. Calipers and rotors need replaced, but upper control arms, spindles, and lower control arms are all usable(need rebuilt with new bushings). Includes disc brake proportion valve (something most guys overlook), upper...

I have a set of adjustable rockers for smallblocks up for sale. Originally from 273 engines, these are an affordable way to add adjustable rockers to your mild smallblock. Included are rockers, shafts, and spacers. I gave them a quick cleaning, but should be thoroughly cleaned befor use. $125...

As the title states, anyone run them? I have a set of flat tops for a 408 I'm building and they are a nice piston, but here's my concern. The "symmetrical valve pockets" they come with, how large of a valve will it accommodate? I can't seem to find any specs. I had planned to run W2s with 2.08...

Anyone have an abody with a roll bar in it and running a factory bench seat? Any pics of how it was built? Custom bar or a pre built one? I want to put a roll bar in my '70 dart, but want to keep the factory bench. Thanks - Andy

Hey all, I'm putting together a fresh 408 for my street/strip car and wanted some opinions on it. I had a very similar 408 in my valiant drag car (3000 lbs) that ran 10.0xs, hoping to run mid 10s in my Dart. It weighs 3350 with me in it. Ran 11.20s with the old 416 and the same w2s @ 9.8...

Milodon superstock 340 Pan for sale. As you can see in the pictures, the bottom made contact with the ground and as a result the front corner has a small drip. I had planned on cutting the bottom out of the pan and fabbing a new bottom but plans have changed. Asking $100 and shipping

Up for sale is a 1st generation W2 race head. I had bought this planning to find a mate to it, but have decided to go a different direction. I have never ran this head personally but have checked it out. The seats have been cut for 2.08 intake valves and 1.60 exhaust valves. New exhaust valve...

Correct radiator for a 1970 340 A body (Dart,Duster) in good usable shape. I had it in my Dart up until 2008 and it worked good. No leaks, but some fine are bent. Asking $350 shipped or local pickup in Bedford, PA

Hi, I have a nice 742 case 3.23 suregrip center section for sale. Small 7260 yoke. Pulled from a 55,000 '66 Chrysler Newport. Gears turn over nicely and bearing turn over smooth. The case just needs cleaned up, new pinion seal, and it's ready to go. $450.00 Located in Bedford, PA. Local pickup...

Hi, looking for a bench seat for my '70 Dart 340. Restored or restorable condition, I need it to have black headrests though. Thanks Andy