Search results for query: *

WEIAND #5986 B BLOCK TUNNEL RAM POLISHED ALUMINUM INTAKE MANIFOLD 361 383 400

So had originally put this under my engine and trans install issue, but it is more related to exhaust I suppose.. Ok.. so it has been a few months, had some things come up and finally getting back to the car. Good news is, I have the engine and headers in, the bad news is that they are not...

So, has anyone else ever experienced this or is it just my lucky day? Here is an abbrievated story.. Bought my torque convertor from Summit on March 7th 2014 (pay attention here) and last week I finally got around to installing it (a few moves, buying a house, job blah blah) got it all...

So I am approaching the home stretch with the motor and trying to figure out what ignition/distributor set up I should be looking at. I was looking at a complete MSD kit but not sure if I need everything included. The kit I am looking at has the following MSD Ignition components: Digital 6A-L...

So after way to much time the car is finally off the rotisserie and moved to the new house and Hooker Supercomp headers are installed and tied back (if I ever meet the guy who designed those and said "install is easy" I just might commit a felony assault). I had picked up a transmission and per...

So after doing some research I have learned more than I ever expected about the switches and the "rooster-comb" lever...but I am still wondering what switch I should use. I have a 1966 Barracuda, putting the 360 and 727 in hopefully this weekend (finally). On the transmission it has a single...

So cleaning out some parts and I found 2 dust-shields, that are used on the 65-72 Kelsey Hayes, A body, disc brake systems. These are in perfect shape. I had cleaned and painted them with the intention of using them, but I went to wilwood brakes instead. I can sandblast them if you wanted them...

So having an issue here. I have my spindles on and thought I put them on right (left and right) but when I try to mount the caliper bracket on the passenger side (rear mounted due to away bar) the hole where the long black bolt goes is threaded and it will not seat all the way.. Do I have to...

I am looking for a set of 360 motor mounts for a 1966 Barracuda. Car was originally a 273. Located in Northern California PM me if you have any available! Thanks!

I am putting a 360 in my 1966 barracuda with automatic 727 transmission. I am curious if anyone has a good part # for a replacement radiator.I am running an electric fan. Also, I am assuming a high flow water pump would be the right choice? I have searched on summit, and there are about 63...

Edelbrock Carburetor, Performer, 600 cfm, 4-Barrel, Square Bore, Manual Choke, Single Inlet, Silver Carb was working great, been sitting in the garage for a few years and no longer need it. Probably would bolt on and run, but I was going to rebuild it. $125 and I'll ship in the 48...

SOLD Went with the Willwood BBP kit, don't need these. Spindles have been sandblasted and since the picture was taken they were painted with semi gloss black POR15. Rotors are in very good shape with lots of life left, they have not been sandblasted. I do not have the calipers or the dust...

Brand new, still in box. Never been mounted or even mocked up. It is just to pretty for me, to shiny. Going with the anti-chrome look. Most of the plugs and so forth are in the box, a few may or may not have been misplaced but maybe not. I have no idea and can't remember. Have had this for a...

Another item that I have found to have been discussed in great detail and so much information out there that it actually leaves me shaking my head wondering what I just read. Obviously I am more of a fabricator body guy than an engine guy. You want a bike built? I'm your guy, you want engine...

So I am "freshening" up the 8.75 rear end, and when I took it apart, there are a total of 3 gaskets on each side? 2 metal and one soft gasket. Does that seem right or do you think that they person before had a leak and tried to fix it by adding a gasket? Anyone have an exploded diagram with part...

So I have torn apart the front suspension and pulled out the K-frame and dissasembled the entire suspension. Everything has been sandblasted and primed and soon to be painted. Also Wilwood brakes are on order and should be arriving shortly. New poly bushings and boots and all that. Just...

Not sure if this is the right place to put this or not.. But just thought I'd share how I did it. After much research and looking at different ways to clean pistons, I tried something that I haven't seen on here yet. I have a custom chopper and it gets quite a bit of carbon buildup on the fins...

I am currently rebuilding my front suspension. I had bought the energy suspension kit (5.18104R) and it came with almost everything I need to replace, but I am having trouble figuring out what size dust boots I need for the following locations. Any help would be appreciated! I am looking for red...

So I am going to finally break down and put this thing in the air, need to get the underside blasted and painted and figured that not only would this make it easier, it would come in handy on a few friends projects that we are starting. I am looking at buying this rotisserie and was just...

I had placed these for sale before, due to shipping charges it was very hard to work out a deal with buyers. They are all odd shaped or oversized freight even though they don't weigh much at all. These are all BRAND NEW never been installed. The hood is not boxed, everything else is. Would...

I am ordering a new fuel tank for my project, the orignal one is dented and has a fiberglass or something patch that isn't holding up. Want to replace it with new and move on to the next step. I am ordering the spectra tank from Rockauto.com but not sure which fuel sending unit to purchase...

Well as usual everytime I try to figure something out, I end up with more questions than answers. I did several searches on here and got more confused than when I started! I am currently rebuilding the suspension on my 66 Barracuda, the car will have a 360, has an oversized sway bar, 8.75...

So I am in the process of rebuilding the rear end on my car. It is an 8 3/4 741 and I have no idea what car it came out of originally. It was on the "donor" car when I bought it (1966 Barracuda) . I am trying to rebuild the drum brakes on it, but I don't even know where to begin to order the...

For some reason I can't just find the friction pads, or clamps, but I did do some more searching on here and I did find this kit: http://chucker54.stores.yahoo.net/lespreki.html Now my question is, will that kit work for a 1966 Barracuda? It says it is for 1968-74 All Small & Big Block...

I am currently rebuilding my leaf springs with new poly bushings etc and all the plastic friction pads are crumbling apart. Is there a replacement available? Does not have to be exact replicas, any replacement will do! Any suggestions as to where to get them and what works? Car is a 1966...

I bought a new motor (casting # 4179930-360) for my car, and it came with the J heads installed on it (I haven't pulled them yet so haven't been able to get casting numbers) but they do have the J stamped on them.. I also have a set of heads with a casting # of 4027596 which I hear are pretty...

Starting on the project again this weekend, and was going to blast the undercarraige with garnet to remove the loose rust, dirt and whateve else is under there. Any suggestions on grit? I can get a 55# bag of 80 grit for $35. Would that do the job? I've heard garnet is the way to go, as usual...

I have been wanting to customize my 1966 Barracuda and one of the things I wanted to do was remove as much of the trim as possible (that will all be for sale in the near future if anyone is intersted, I have two complete sets of all the trim) and I love the look of this car. The sleekness and...

Is there any way to find out which rear end this is? Seems that the numbers on the side are a number 7 and beneath that 207074 and beneath that 24 and the letter A and there is also an X up to there. I can't get under the car right now and these were the best pics I have.. I'm just wondering if...

Found these in the garage, actually forgot I had them. They have some wear and tear from being moved around, but never isntalled. I have power steering on my car and now going with fenderwell headers. Asking $400 or best offer.