i just put a trac loc diff in my 74 duster. It came out of 96 dodge dakota its an 8.25. now my problem... will 8.75 axles work in it because axles from duster are 27 spline and trac loc is 29 spline.
600 Edelbrock Carb, Manual choke. Works great , switched to a Holley. $100 OBO plus the ride. It originally was posted as a 650, screwed up..it is a 600. Model #1405
going to get new distributor I really believe vacum advance is not working.I have checked for leaks even bought better intake gaskets along with carb gaskets. Then If that dont work gonna buy a chevy lmao kidding.Thanks so much for all the input you guys are awesome.
i just rebuilt a 360 put 484 284 cam. Balanced crank piston. put 650 holley new distributor 340 202 heads.My problem is starts up great idles good go to put it in ears falls flat on its face and dies.Turn up idle but then in park its idling at 1800 rpm to keep it running in gear. what can I do...
thxs everyone, pretty sure I got the brake issue figured out, gonna work on that tomorrow, and thxs for the info on the timing, going to change that up to & see if that makes a difference too
Hey thanks for all the input and advise. I think I'm just going to switch to manual brakes. The only reason I wanted power brakes was for my wife. This is her ride. And by the way timing is set at 5 degrees BTC and 484 284 cam. Thanks again
We are in the process of restoring a 74 Duster, have the drivetrain finished but are experiencing a Brake problem. We have Power Steering/ Brakes. Took it out on the road last week & ended up with no brakes. Have been told we need a Vacuum Pump(they are quite expensive). On the old valve cover...
Hey Woody, you said you have shifter linkage for automatic..we need everything from the shifter to the tranny, if you could send pics to [email protected], along with price & shipping to 45891 we would appreciate it. Thxs
Looking for Shifter Linkage for original auto floor shifter, need the linkage that goes thru the floor & hooks up to tranny. Need both pieces. PM me if you have it & I'll send you my e-mail so you can send pics, or post them to this thread. Thxs
In the midst of restoring our 74 Duster, was a 318 4bbl, 904 trans when we bought it,. We have rebuilt a 360 & 727 to stuff back in it. Have tried to upload pics to here but having trouble with that for some reason.
Looking for a 70-72 Duster rear bumper (preferably with the brackets) to put on our 74 Duster. Needs to be straight & preferably close to ohio zip 45891, so shipping isn't outrageous or we can pick. OK if it needs rechromed.
going from a 904 tranny to a 727, do I need to get kickdown linkage for a 727 or can i use 904 linkage? If I do need to go with the 727 dioes anyone have it for sale?
Restoring a 74 Duster & recently bought a center console & shifter. The hard plastic piece that the shifter sits in is in bad shape. What exactly is that called, where can I can one (or can it be repaired somehow?)