Search results for query: *

Hello, looking for 1967 barracuda front fenders. have fiberglass fenders but would rather have steel. Thanks

Well usually I don’t have so much trouble finding a part, but I’m working on a 1985 Aries 2.2 non turbo engine, this diagram shows the part I’m looking for, they call it the vent module, we’ll I can’t find one so any help would be appreciated!

not and a body, b body, or a “cool” Mopar But this ‘85 Aries wagon was my great grandfathers favorite car, choosing to drive it over his “new” dodge. Well he passed away a year ago yesterday, he was my best friend, and great mentor, and always was happy to help when I was working on my cars. so...

would someone be able to give me a measurement from back of hood to back of scoop, or front to front? 72 swinger with six pack scoop Thanks!

Looking for a set of .030 over 4.28 bore 383 forged pistons. Thanks

hey guys, never had any problems degreeing a cam or having them be far off. But building this big block ford I’m a little stumped, cam is a Lunati solid roller, 106 centerline, when installed straight up I’m getting 99*, I retarted the crank gear (9 keyway chain) and got it to 105* is this...

hey guys, helping my buddy build a street strip truck,’86 f150 2wd, and wondered what you guys thought for a converter, engine is about finished: 429 ford .030 over the flat tops 10.2:1 measured Stock rods arp bolts, stock crank all balanced Ported dove iron heads 2.19 1.74 valves Victor intake...

Friend of mine is working on a 429 Ford, the block was re machined and in his garage, I told him to keep a good coat of oil on everything to prevent rust, but I guess with the changing temps and his in heated garage it got surface rust in the bores, Wd-40 and a rag won’t take it off, so maybe a...

going to drain the break in oil out of the motor, I’m gonna stick with 20w50 but what brand oils are you guys running on your rollers? I’ve always had flat tappers with brad penn

ok guys, lost brake lights the other day, checked the usual, replaced all fuses in fuse block, now with light switch off I have tail lights, turn signals work, hazards work. With switch on, I have no headlights, turn signals work sometimes, no brake lights, replaced brake switch.... headlight...

hey guys, quick timing question It’s a 1969 d100, truck seems to run good just checking over a few things since I don’t know a bunch about these little engines. So with vacuum advance plugged im at 10* @ 750-800rpm idle, and about 35* @2500rpm With vacuum advance working I’m at 45* @2500rpm...

hey guys, I’ve been running 100ll fuel for awhile now, I’ve been through about 50 gallons, no problems with drivability or motor, car absolutely loves it..... but I noticed today a leak spot in the driveway, and noticed an empty fuel cell... so I poured a little in the cell and found a leak from...

hey guys, maybe someone on here will know a little about this, but I have a 1969 d100 /6 3 speed short bed, I found a 1963 w100 power wagon short bed pretty close to me and pretty cheap. My question is can I rob this w100 of it’s front/rear axles, transfer case, and transmission to swap into...

helped my buddy pick up this cuda today, numbers matching 340 auto car... came with enough extra parts to build 2 of them

my uncle is ordering a set of shocks for his car and was wondering if anyone has a stock front suspension 65 b body with a big block that could measure the shock height with the car at ride height

ok guys I’m finally going to install my wideband today, I know you can torture yourself to death tuning with these but I’m wondering where about my afr should be at idle, cruise, and wot. It’s a .030 over 383 About 10.6:1 iron heads .557 mopar cam Street dominator intake 750 mighty demon 38*...

i was going to change gear oil in the 4 speed and fix a leaking reverse detent, when I pulled the detent out the ball fell in the trans..... any suggestions on how to get it out without pulling the trans?????

well my uncles last race of the season didn’t go so well, he set the car on kill and pulled a big wheelie.... smashed the oil pan and busted the trans pan, so the motor is out. He decided to pull off his OLD muscle motors stage 6 heads that flowed 316@650 and bought a set of the truck flow 270s...

hey guys, got a 69 d100 with a /6, has gauge worked perfectly until the other day, reads barely above empty all the time. New seeing unit or check something else? Thanks

well me and the woman packed up and came to Florida for a week, went to a few parks in Disney and doing some fishing here in Polk County, Boy is it hot, you Florida guys must be tougher than I am! Saw a few mopars too, 71 cuda in a Firestone shop, should have got a picture!

so my dad bought a 2017 Tacoma brand new 38k... yea I kno lol... anyway, he took it to the dealer for its first service check and they wrecked it, bay door wasn't opened enough and they trashed the roof. They didn't call to tell him but rather waited till he came to pick it up, they gave him a...

ok fellas, here's the run down... Fairly new battery in the trunk One wire 63amp alternator Msd6al ignition And really the only electrical accessory is a fuel pump. I had to replace the alternator due to a bad bearing, used to show 14volts with key on, then 12 volts while running. The...

care to share pictures of your cars with the six pack scoop? The regular 3" and hopefully some of the 5" tall versions

a few of us had our fist annual cruisin cookout, had a good time and good burnouts! I took the dart and my dirk friend took the pickup

i have a hurst super shifter with push down style reverse that DOES NOT have the alignment holes, so I used a small clamp to hold the 3 arms in the same spot, adjust linkage rods and go for a drive, works fine but after a few shift cycles the adjustment is off.... slightly re adjust and same...

has anyone ever used one of the DIY e85 conversion kits? Just looking for a little feedback! Thanks

Going to replace the junk universal throttle cable on my car with an oem piece, which cable should I get? 72 dart, 383 with street dominator intake and a 750 mighty demon on a 1" spacer. THANKS!

running Hughes rockers, solid roller, PAC springs [email protected] 580lb open I threw in the old smith brother pushrod and at zero lash the adjuster has about 3 1/2-4 threads showing. I know they say around 1.5 threads is optimal but what do y'all think? Are a new set of pushrods in my future?

got the hold downs milled to center the rockers, checked the sweep pattern, looks pretty sweet!

dont know if you guys saw this, but they gained 90+ up and 40 lb of torque from port work on a 408. Pretty neat!