Search results for query: *

I have the originals and have the car sitting lower than stock. It botoms out on the bump stops and is very soft. what torsion bars are reccomended?

Not Digging the Giant bold lettering for new post's I rarely get on because its annoying. The old format and color was better as far as text size and layout.

I know there are threads on it. But in all actuality how easy or hard is it to do an at home rebuild? Mine is leaking, grinds 1,2 on the down shift and has a stuck ,and I mean damn stuck, drain plug.

I went to get some gas the other day and made a hard left turn. When I went back straight the wheel was off center. I assumed something slipped. I realigned the front end today and checked everything to make sure nothing was loose. Took it for a spin made a hard turn and same thing. However I...

I am trying to work with an LED company to make taillights for our cars. How many would be interested in this? Mine aren't no where as bright as I would like. Dim in the sunlight etc.. I would need some interest from you guys to get the ball rolling. I have spare housings and lens to send to...

I decided since it was a great day here I would take the Cuda in to work. The fun starts about a mile out from the jobsite. The car suddenly starts shaking badly. its not in the steering wheel so I know its not in the front end. I immediately press in the clutch and turn the car off and start...

I bought a Promo model that is missing the taillights and the bumpers are a bit worn. anyone have a parts kit they would be willing to sell?

I need the long drip rail molding with no dents or dings. (passenger side) I have the front curved piece but the long one has a ding in it. Let me know what you got. Also looking for the same part on the drivers side. So basically a set if possible.

I am looking for the pair of these. they were on a 64 and 5 valiant I believe. Let me know and what price shipped to 77565

What is a good budget manual steering box to replace my old worn out one? I hear of the different ratios etc.. Whats the best ratio to go with and what is the P/N of that particular ratio? I have the stock front end and column. Thanks in advanced!

Does anyone have the bezel that's left of the speedo bezel that has great chrome on it? 64 ITEM ONLY..... I need the 4 speed one. They only repop the push button trans one. I would hate to buy a new one then cut it up. Let me know what you got, price and pics would be great. thanks :clock:

I ordered a new set from laysons and they have been on back order for a little while now. Doesn't anyone have 1 in great shape with no cracking. I have one very good one but the drivers side isn't great. Let me know what you got and price. Thanks.

I am going to have my 64 cuda aligned Wednesday. Are the stock specs any good? Are there some better specs out there? Either way I hope someone can post up the specs because they can manually put them in to align it. thanks for the help.

Probably been asked before but can't find a good link to my issue. I have a 64 cuda with the 4 speed. I pulled the tranny out along with the motor when I freshened it up. Nothing was changed on the transmission when it was out. When the car is cold it shifts fine. But after it get warmed up it...

I have done a quick alignment in the garage until I can get it to a good shop. One issue. I got the car tracking pretty much straight for now. However when I hit the brakes it wants to pull to the right. Any tips on why its doing this? Brakes are new on the front and have been bled. Pedals good...

Anyone have a few spare screws for the rear latch handle in good shape. I am missing a couple and would like to have the correct ones. thanks

Has anyone restored one of these. The wheel is in good shape just need to clean up the woodgrain portion. Any tips and tricks?

Looking for the guts for the woodgrain steering wheel to mount the horn button and get it working. New or used is fine as long as the parts work and is complete. The aftermarket wheel I have tried is a pain in the arse:violent1:. My wheel is in great shape but the retainer ring and guts were...

Does anyone have a good working turn signal switch that goes in the steering column. I need it for a 64 Barracuda. Other years do work just don't know which. Mine wont trigger the drivers side turn signal. Hopefully someone has one. preferably no wires cut.

How can I tell which seal I need. I have the stock 64 barracuda 4 speed. The rear seal where the bolted shaft goes in looks to be leaking. Is it an easy replacement?

Looking for the small side piece of stainless that goes around the trunk hatch that closes on the hinge. The inside carpeted piece that drops down. I need the small side piece. But will take all three pieces if they are in good shape and right price. let me know what you got.

Who knows the fitting sizes for the front and rear brakes on a 64 barracuda. I am sure they are the same for other models. I think the line is 3/16 But would like to replace the lines. Adding a dual Master cylinder and need to change a couple of lines and maybe an adapter or two. thanks

Looking for the vent window channel fuzzy (rear edge of the vent window). The fuzzy the front edge of the roll down window rides in. I only need one but will get a pair if need be. Let me know. It can be old as long as its in good shape.

I need to figure out what clips I need exactly, for the chrome molding that goes from the taillight forward on the rear quarters. I have a couple that are loose and don't want to pull it off until I have to. Anyone have a part number and picture of what they are. Not looking for "what will work"...

I have done some searches and not found exactly what I'm looking for. I am going to have to remove the rear glass in order to install the headliner the correct way and not look like chit. Any clear write -up's tips and tricks to get it done without any damage to anything. Doesn't look like it...

Does anyone have one in black? If not I'll take any color becasue I can dye it. It needs to be the 11" base pad. thanks EDIT: I need one for the passenger side

I have the dougs headers for my 64 cuda. They are the two piece style. Can the pipes be sealed from the outside where they come apart? I installed the pasengers header without spliting it apart. Can it be sealed at the seam on the outside of the tube without it blowing out? If so what to use?

Does anyone have a new set of black carpet they don't need? I need the rear section but could use the whole set. The carpet in mine is fairly new but the PO screwed it up in places cutting it short.

How does the front seat top and bottom come apart. I have new upholstery to install and need to separate the halves to do it right. Is it simple?

Did the 64 barracuda have a dome light. or was the two rear lights the only roof lights it had.