Search results for query: *

Thanks for the info, Car is not together, anyway to bench test it? Thanks, Jason

Hello, Anybody know how to check to see if a power steering gearbox is any good? Or has anyone had one these apart before, is it a pain? Are there rebuild kits available? Thanks, Jason

Hello, Where can I find sway bar bushings (triangle looking ones). Thanks Jason

Hello, On my 70 dart I replaced the last two feet of my subframe. I removed the trunk floor (bracing quarters first) Bent up new frame rails, Rear cross, and spring mounts. I made the frame rails slightly bigger to fit over the old rails. Cut the old rails off and overlapped the two by...

Thanks guys, Where can I find a 4.2 kick down? Would I need an Accumulator rod for a street car? What is the advantage? Thanks, Jason

hello, anyone know what the stall on 1970 225 with a 904 is? thanks, jason

the engine is just calm rebuild. bore and deck. increase valves. nothing radical, just a street car.

More questions I came up with Shimming the accumulator spring to allow less travel. How thick of a spacer? Kickdown lever I can't remeber what ratio mine is. But Mopar performance offers a 5.0:1 Good idea? Pros cons? Front clutch drum snap ring is a wave style. Putting a flat snap...

Hello, I have just started a 904 rebiuld, and I'm looking for input. Let me give you my set up. 225 w/ 9.5:1 HP not dynod yet 2.76 7 1/4 rear end STRICTLY STREET CAR, that I won't be afraid of stomping on now and then I plan on putting a transgo TF-2 kit in it My questions are these...

Thanks for all the replies. Got my block and head back yesterday and measured it. The head is 56cc's and I have .170 deck clearance. Crunching the numbers and accounting for a much thicker head gasket. Stock .022 new one .042. with a .010 cut on the head to clean I can take .085 off the...

Thanks for the post. Didn't take the time to cc the head myself. Block and head are getting cleaned right now. Just trying to crunch some numbers. I want to end up in the 9.5 range. Question? I assume you have done a slant 6 or two. What kind of intake/ carb setup would you recomend? It...

it is a 1970 225

Hello, Does anyone know the CC rating of a 225 head. Also what is the top of piston distance to the deck at TDC. Thanks, Jason

First pull the drums off, then there is a hole in the axle flange, going through that hole with a socket, remove nuts (4) 9/16 holding backing plate and bearing cover. Take a slide hammer and it should come right out.

Hello Agian, I noticed a number of people have looked at this, but nobody has replied. New question would anyone be interested in this tool if I was to make it out os solid stock, just like the Mopar one?

Hello, I the process of rebuliding a 71/4 rear end for my 1970 dart. Went through the carrier setup. Machined new shims. Wondering if anyone knows where to look for a Spreader Tool C- 3721. I made one out of 1/8th wall square tubing. I could only get .007 spread before it bent the tubing...

Hello, Just happened onto this website and thought I could gain some knowledge from here. As well as share some of mine. I own a 1970 Dodge Dart Swinger. This was my wife's great grandmothers car. It is a stripper. Slant six w/904, 7 1/4. Alpine white with a black top. I have the...