Search results for query: *

Looking for some 2dr 69 Valiant parts Need: Hood Front fenders Both doors I’m in NC

Afternoon gents, Reaching out to the brain trust for a little guidance on sorting parts. Recently got hit head on in my ‘69 Valiant 2dr. Just wanting to verify what years will work as donors for hood, fenders, gravel pan etc. Are the 4doors the same from the firewall forward?

Running Fitech, and I would like to try and quiet down the IAC. Anyone have a suggestion for the quietest air cleaner?

requesting advice from the brain trust.. I have two large hazmat containers that required the floor be cut out/replaced due to heavy rust. Looking for advice on what to prep/prime/top coat the new floor with. There is no doubt rust still present, so looking for something that seals it up...

The rear side windows on my 2dr Valiant both evenly roll down about 2/3 of the way. Is this correct or should they roll down flush with the body the same as the door windows do?

But I won't lie, I think it's pretty sharp.. Rocket Bunny Combines 240SX and Barracuda - 95 Octane

Gents, I have a 69 Valiant and I’m wanting(needing) the ability to defog/frost the rear window. I know this was an option on these cars, but I really don’t care about keeping it original. I just need it to work well. Anybody retrofitted something to work better than the factory system?

needing the plastic seat hinge covers for a 2dr 69 Valiant bench seat, and the chrome T-shaped seat release

Needing a set of front defrost vents for my 69 Valiant..

wanting to add rear defrost to my '69 Valiant Signet. Looking for a complete set-up. Prefer it comes out of a Valiant, but I guess I can just lie and never admit it came out of one of the lesser, unrefined, and uncouth a-bodies..

Anytime my Valiant sits out in the sun for a few days, I end up with an oily film inside the windows. Uniformly on all glass. Carpet/floorpan is bone dry, I pressure tested heater core, no funky smell or residue on anything else, just the glass. Any suggestions on the cause??

I know it's a longshot, but figured I would try in hopes somebody has one collecting dust out in the shed. Looking for a 2000-2004 Honda XR400.. Anybody?

This may be a fairly weak post, but it is a straighforward RFI. I need some quality oil change stuff. I am tired of dikn around with the cheap plastic stuff that leaks everywhere. I like the deep open galvanized pans(and have a few), but hate having to clean them out. Basically I'm looking for...

They were all over Wa state when I lived there. Seemed like every rural volunteer Fire Dept had a yellow one parked out back for only a couple grand. Kicking myself for not picking one up. I'd really love to get one, freshen it up, and use it as a daily driver. anybody here own one? Let's see...

Gents, needing to tap the brain trust. Torque converter bolts were making light contact with the shield/block. The bolts appeared to be regular bolts that had been "clearanced" by PO. Threw in a set of ARP's and its still making slight contact. I haven't dropped the oil pan, separated the...

Looking for suggestions for fuel filters.. running the FiTech FCC so I need a low pressure pre filter, and a hi pressure filter. What's the good, the bad, and the ugly?

Looking for bench seat hinge covers and the seat release knobs. Prefer blue, but I'll take anything in one piece..

Gents, looking for a little guidance with the correct mounting of my ‘69 Valiant’s bumper jack. So from searching the forum, my understanding is the tire iron goes through the welded “U” on the floor pan, with the lug end nesting in the bracket just forward of the passenger taillight. The tire...

not my ad, don't know the seller, but I know there is a Slant lover out there that is searching for a deal like this.. 1979 Plymouth Slant Six (Super Six)

Anybody have some bent or otherwise scrap rods? I have a few little garage art projects I need materials for. They can be from SBM or anything really. Copper coated mystery rods are a plus. No issues providing some beer money, and covering shipping ofcourse..thanks

gents, looking for some help with my 904. I'm running a 3500 stall converter and manual 904 from hughes. Now that it's nice and toasty in NC, I started to notice a slight vibration right at 2950-3100 rpm. I can ease right in/out of it while cruising under very light throttle. I have been...

we have a key chain thread, now let's see the stickers. I had this one made for my girlfriend who is 6' (I'm 6'2") Pretty fitting for the car as well..

Checking a set of adjustable roller rockers with hydraulic cam/lifters for the first time. Just had a few questions for those that have been around the shop a time or two. Running Comp 1622-16. When setting preload, comp directs to go to zero lash with no verticle movement in the push rod, then...

Good evening folks, just had a few questions about intermediate shafts/gear for my little 340. I recently purchased a new distributor (MSD) and it appears the distributor shaft and key are too large to fit into my drive gear. Upon close inspection, it's obvious the previous owner polished the...

Does anyone have a source for the OEM throttle/kickdown stud that mounts onto the throttle linkage of the carb? I am running a manual valve body, so even a source for something that works for just the throttle side would be good. I want to have my old Holley 100% perfectly dialed in before I...

Gentleman, I know the CW/CCW discussion between the SB/BB has been beaten to death, so I apologize up front for starting this thread. After searching the forum, it is very obvious that a SB distributor has a clockwise(CW) rotation while a BB uses a counter-clockwise(CCW) rotation. I am running...

So I have always cringed at the thought of removing the back seat. My first go was on a '72 Valiant more door. She fought me for hours but I finally won using and open end wrench on the wire frames "foot" and wedging a scrap of wood in behind the front seat. I sat on the seat for the "down"...

That is one good looking more door. Just thought I would post it up... 1969 plymoth valiant

We have all seen a well kept and detailed engine and engine bay. Well I'd like to see some trunks. Looking for solutions to carry modern scissor jack, spare tire, tools, etc. I like original, but I also like resto-mod to increase the overall user-friendliness of a 50yr old car..Some things are...

Currently in my Valiant is a built up 904. it has a manual valve body in it and the 1-2 shift is teeth rattling while sanely driving it, but feels perfectly smooth and appropriate at WFO. The 2-3 shift is pretty stout as well, but I can atleast smooth that out by slightly lifting. What I'm...