I have a huge griffin radiator right now. Its a universal fit side tank 3 or 4 core (dont remember). I cannot use a clutch fan. I would like to use a correct size (26")? 2 core radiator in hopes of using the clutch fan with a shroud. an electric fan is not out of the question. The engine is a...
Hello everyone. I just released 3/16" (.190" actual) aluminum bumper brackets for front and rear. These can be used with steel bumpers or fiberglass. They weigh 2.2 lbs per set. I also offer the same brackets in .125" for fiberglass bumpers only. Fronts are $150, rears are $125 plus shipping...
Its been awhile since they were loaned to me, i owe someone here a front and rear set of aluminum bumper brackets and the loaners they sent me. Since the changes in the site I dont have my old private messages any longer.
I have been using a aluminum griffin gm style radiator for years with a 16" electric in front and a flex type fan on the motor. No shroud. The motor is an iron headed 570 hp 440. I have a champion CC375B new radiator I can put in. The core sizes are the same, 26x18. The griffin is cross flow...
I have a power master mini alternator that gets hot when engine is not running. It's a one wire design. Nothing else is on like electric fan or similar. After turning on master disconnect switch the casing will be hot to the touch in several minutes.
I'm having interference issues with my pro parts headers and my tie rods. I'm using "elephant ear" engine mounts and I'm wondering if they are sagging. What is the correct or recommended height of the engine in relation to the k frame? Like crank center to k frame top for example.
Can someone give me the part number for the front pump seal for a b/rb 727? I think the number is 331227H for National brand seal. the seal i took out is A9927RER National. the seal is nicked from removal so that number could be off by a digit.
WTB, im looking for damaged bumpers where half of the bumper is still presentable to use for displaying my bumper brackets. I would prefer the bumper be cut in half before shipping to save on shipping as i will only use half for my display. I need 67-69 dart front and back, 70 72 Duster back...
Any opinions on the mickey thompson ET street radial vs. the ET street radial pro? The size is right at what I use which is the ET street radial 275/60-15 28". I m due for replacement and Im considering the ET radial pro or a small step up to the ET street radial in 295/50-15 which adds approx...
I'm considering adding a second battery in the trunk. More often than not I find I have to run my electric fan while in the staging lanes. Between the starts and fan i m usually right at twelve volts and 190-200 deg when I roll up to the line. Any suggestions besides a better battery? The...
Hey all, I have a right side bumper bracket for what I believe is a 74-76 duster or dart sport. The part numbers are 3686032, 3686036. Thanks in advance. Will add pic in the morning.
I have a set of schumacher LA to B/RB A body conversion mounts. I have modified the mounts some as seen in the pictures. For some reason, wrong K frame? I could not get my engine over the mount where it should be. I tried adding some landing are to one bracket as seen in the picture. I also...
Ok, here goes.. first let me start by saying I made a set of these brackets in 2000 for my 70 Duster drag car. I have been working on this current idea for well over a year. I did not want to mention it publicly until I had a working part for a few models and some sell-able parts. I displayed...
I have for sale 73-76 A body disc spindles. I have only the spindles, no hardware. One spindle has a speedy sleeve on the seal surface. $145 plus the ride from 46350.
I have a used mallory unilite #3757801 for 413-440 engines. This is the mechanical advance model. I have the paperwork and extra springs that came with it. I do NOT have the plastic separators that mount to the coil to separate wiring. I have the recommended coil #29216 as well for an extra $25...
selling my 66 coronet, take a look http://southbend.craigslist.org/cto/4141426149.html
south bend indiana area, asking 12,500 or trade for enclosed trailer.
not sure if this is the correct forum.....im replacing the timing chain on 2003 ram with a 5.7 hemi. the truck has 160k on it. the procedure is to align cam sprocket dot with odd colored link at 12 o'clock, and crank dot between two odd colored links at 6 o clock. with the dots in the correct...
How much does your tire pressure change during the burn out? If i set my tire pressure at 18 psi, what can i expect my pressure to be after the burnout? On my next outing im trying 20-22 psi, just curious what my pressure will be when on the pass.
How much is too much? I have a melling high volume oil pump on my 440. cold its 80 psi, warm it is 60+. I figure this may have something to do with my valve covers leaking.
weather permitting, some friends and I are traveling north to Wisconsin international Raceway for some racing with a friend of ours that usually travels south to race with us. If anyone races there and see's some indiana plates stop by and say hello!.