Search results for query: *

Looks for a driver's side vent box to go into a 66 Dart. Any early A-body should work. The hinge on mine froze and broke. Thanks!

The plastic lens/speedo cover that I'm putting back in my '66 Dart needs the numbers touched up in a few places. Anyone happen to know what paint type the factory used, acrylic or enamel? And also, is there an off the self paint that is a decent color match...such as Testers, HiPoParts...

Anyone know what paint finish should be on the heater blower motor and mounting plate? I'm thiiiiinking semi-gloss but not 100% sure...since I only have a 50+ year old motor to look at. Could have been satin or gloss for all I know! Any guidence would be appreciated! Thanks, -Phil

Looking for the front plastic cover/bezel that goes over the speedo for a 1966 Dart...but, would be interested in the entire gauge cluster if that's how you'd rather sell. Please let me know what you have, where it's at, and how much. Thanks, Phillip

Still looking for a 1966 Dart dash pad. Red is preferred but, any color is better than nothing. This would be the straight dash pad, without the slight recessed area in the middle. Thanks!

Prefer a red one with few to no cracks but, beggers can't be choosey so, please let me know what you have and price. Unfortunately one from a 63-65 Dart or Valiant will not work, they have a "dip" in the middle of the pad. The '66 Dart pads are straight all the way across. Thanks in advance!

Ideally, I'd like to find a set of perfect headlight bezels but, let's face it, they just about all have some dents, dings. and scratches. To give you an idea...my right front bezel is beyond ugly. Mangled, dented, crushed, and ground/cut into with an angle grinder (came with the car this...

Can someone please measure the length and width off an early-A hood. Have a long drive to go get one and would rather take an HHR vs. gas thisty truck. Need to see If it'll fit. Thanks.

Looking for a straight 1966 Dart hood...and lead edge trim, it it's still on it. Thanks!

Needing a right (ie. passenger) side headlight bezel and the trim that is attached to the front of the hood of a 1966 Dart. Possibly even a straight front bumper too. Let me know what you have and the asking price. Thanks!

Just ran across this one today while Craigslist surfing. Definitely a different Mopar swap... vw bug with v8 motor

Does anyone have an old Sig Erson catalog that could look up some spring for me? I'm looking for specs on TYPE 542, PART 915921 (could be 915421) springs. Thank in advance!

Finally got my 318 fired up, cam broke in, and new/stiff springs installed. I know some will say...should have built ____, used a _____ cam, etc, etc. But, I'm happy with it....factory steel crank, K1 rods, Wiseco pistons, heavily modified 920 heads, old MP solid circle track cam, Airgap...

I'm looking for a lower alternator bracket like the one in the picture below for a 1966 A-body car. I have the upper bracket but, for some reason the lower bracket I have is too short. Please shoot me a message if you have one! Thanks!

Anyone have dimensions for the 1968-69 340, 383 and 440 unsilenced air cleaner? Mainly just looking for the overall diameter of the top cover (including the curled lower lip) and how tall the sides are (bottom of curled lower lip to top part that holds/pushes on the filter). I realize the center...

$450 This is a bare block with the original main caps and still at the factory bore. The casting date on the block is 3-10-69. Casting number is 2780930-340-6 and the VIN # on the pan rail reads "9B368984". The stamping up near the top LOOKS to read "EW340P28400021"...not easy to read. I...

I'm just curious what others would do when a parts deal falls through. Short story, I recently messaged someone parting out a car and inquired about a couple of parts. They had said parts (fan and shroud), stated a price ($60), I said "I'll take it, just let me know how much shipping is, and...

SOLD Reproduction 1968-69 unsilenced air cleaner sold as MP part # P4529001. Never used...but, I did have it out of the box and sat it onto of a carb. Just didn't look right for what I wanted to do so I boxed it back up and it's sat ever since. Looks as if the bottom of the lower lip didn't...

I bought these several years ago and no longer need them. They are in great shape and the polish job on them is really nice. No cracks, damage, or repairs. These are probably the nicest Cal Custom valve covers I've ever seen. If you'd like larger pictures please message me with your email...

This is a completely stock 360 out of my 1989 W150. The engine has right around 130K on it (I forgot to look at the odometer this morning). The truck is a factory 4-speed which means the crankshaft is already drilled for a pilot bushing. The engine has a factory roller cam in it (read: set up...

Just like the title says, this is a Comp Cams hydraulic roller camshaft for a magnum engine. The part number is 20-608-9 and came installed in a newly built 408 I purchased from an estate. It's been installed but never ran. MUCH too small for a 408, in my opinion, so I'm letting it go! Cam...

I'm looking for a set of engine mount brackets off of a 273 in an early A-body (~64-66). Not the rubber mounts but, the metal brackets that bolt to the ears on the block. Please let me know if you have a set and how much you're asking. Thanks, Phillip

I've got NOS set of center caps for the old (69-72) Motor Spyder wheels, still in the factory box and including the factory screws to mount them to the wheels. $1000 shipped anywhere in the lower 48. And for those of you who don't know what they are or what they look like, here's a link to a...

Looking for the older (64-67) timing indicator that bolts to the bottom of the water pump. If anyone has one laying around that they are willing to part with, I'd appreciate it. Thanks!

Title pretty much says it all...looking for a radio delete plate for a '66 Dart GT. There is a slight difference in a GT (and 270?) vs. plate used in the base model Dart (the right hand side of the plate is different). It will look like the first picture I've attached, not like the 2nd...

The title pretty much says it all! Look for a late Feb or early March 1966 273 block or complete engine. Let me know what you have and what you're asking. Thanks, Phil