Search results for query: *

340 windage tray. In good condition. Has been coated with POR. Asking $60.00 (shipped lower 48) Located in Richland Ga. No hardware

Windshield trim out of a 69 Dart 2 door post car. Upper piece has a couple dents but not crimped over. Needs polishing. Very restorable.Asking $80.00 (shipped lower 48)Located in Richland Ga.

2 police center caps. Good condition. Looking for. $35.00 for the pair. Located in Richland,Ga

Weiand stealth intake.Fits LA engine. In great condition. Was bolted to engine but never fired the engine up. $100.00 Located in Richland, ga. Will ship. Shipping xtra. Thanks, Bubba

Found some. Thanks everyone! Bubba

71 F-100. Has 302 and auto tranny. 9" rear. Runs but needs carb build and gas tank cleaned. Its in its original paint 1 owner. Has been sitting a few years. $750.00.Located in Richland GA

1405 Edelbrock 600 cfm manual choke. Nothing stuck or frozen. Asking $65.00 shipped U.S. Most likely needs a kit.

#1407 Edelbrock 750 manual choke. Was running ok when pulled off a year ago. Been on a shelf ever since. I think it needs a new kit by now. Everything working nothing frozen up.Rear vaccum threads are good not stripped. Asking $65.00 shipped U.S.

Un used comp hydraulic cam and lifters for Small Block. Cam still in the plastic. Never opened. Lifters never opened. Bought this cam and lifter set and decided to go with a solid kit. Pn# 20-224-16/ XE274H. Adv. duration 274/286. At.50 230/236. 110 lobe separation. Lift 488/491. Asking 1/2 of...

(3) 14x 6 Magnum wheels with trim rings. Driver quality with good beads. Need cleaning and paint. All I have is the three. Asking $40.00 each + shipping.Located in Richland,GA

Small block 1.5 Pro form adjustable rockers with chrome shafts,Comp small block solid lifters pn#821-16,Comp solid lift cam#20-248-4 for small block and Comp push rods#7822-16 for solid lift small block.All new and never opened. Asking $350.00 + shipping.Please PM. Located in Richland,GA

I have a 360 oil pan with #955 on the sump. Any one know what year this pan might be? and what body car..A,E,B or C possibly? Thanks,Bubba

I have a complete engine gasket set for 340-318.Sealed power#260-1121 (Fel Pro) looking to trade for complete engine set for 360. There is nothing missing from this set.

In order to use stock 360 rods, do I have to press in a floater bushing in order to use floater pistons? Thanks,Bubba

Getting ready to build a 360..In order to run floater pistons on a 360 rod, do I have to change the stock or pressed rod bushings? Thanks,Bubba

72 Cast 340 Block. Date 9/25/72. Last 6 #s 145404. Block has matching main caps and is bored .30 over. Asking $400.00+ shipping. Located in Richland,GA SALE PENDING!!!

2006 American Hauler. 5' wide, 5' tall and 8' long not counting the nose area. In great condition with minimal use. Hooks to 2" ball Asking $1,000. Located in Richland GA.

Comp Cams Big Mutha Thumpr hydraulic flat tappet cam and lifter kit for small block. I ran it about 1k miles. Not what I want. Im goin to a solid lift kit.This kit is: Pn# CL 602 4 . Cost me a little over $240.00 shipped. Asking $120.00 shipped U.S.. Will ship out of U.S. but will have to check...

Any body ever tried the MP solid cam #653? Its 284-284@60 and lift 528 center line 112. Just want to check and see if any body on the forum has tried it before I go and buy one. My 340 has ported J's with 2.02's and 12.5 to 1 TRW's. Thanks,Bubba

Has fresh 340 .30 bore .10 and .10 main and rods with 12.5 compression. 2.02 J's Comp Big Mutha Thumpr hyd flat tappet cam. Stock rods,forged steel crank all balanced. Runs STRONG! Has fuel cell in trunk with new 3/8 aluminum fuel line.Has Holley blue pump with regulator. All front suspension...

95 model F-150 extended cab pick up with factory off road package. This truck in its original paint. I has never been altered other than dual exhaust. Never abused. Has a new tranny and the posi rear has been rebuilt. It is positive traction all the way round. has 351 engine. Air blows cold...

Lookin for a ring and pinion in decent shape for a 489 case,3.73 ratio and 29 spline.Got stuff I can trade...or buy out right..

This 340 has around 1,500 miles on it. Runs STRONG! Its a 72 block, .30 over bore,.10&.10 on the forged steel crank. Has 12.5 to 1 TRW pistons, file fit rings. 2.02 J heads with mild port and polish. has Comp Big Mutha Thumpr hydrolic flat tappet cam and lifters. Has MP valve springs good for...

Here is a floor shift collar assembly...thought somebody might use to replace the column shift assembly. $40.oo + the ride. Please Pm as it will show up on my email. I check it more often.

I've been running Valvoline VR-1 oil in my flat tappet 340...because zinc has been remove from conventional engine oil. Another person told me that Mobil 1 works fine. I know that Mobil 1 is a synthetic oil...but,will it work in place of zinc oil?.. Thanks,Bubba

This 340 is strong! 12.5 to 1 TRW's, Big Mutha Thumpr flat tappet hydrolic cam, Balanced forged steel crank .10 and .10 has around 1 thousand miles on it since built. Comes with the intake,MP covers. Has double roller timing set, high volume pump, 2.02 J heads, springs good for 600 lift.Need...

NOS Cheater system with solenoids and hardware. Has 175 jets, blow off tube and mount. Asking $250.00.(Shipping is included in price U.S) OFFERS WELCOME!!

74 Cadillac Hearse. Has 501 ci engine with 56K miles. Asking $3,500. Located in Richland,GA. Please PM.

71 Duster.SOLD!!!!

For sale Vintage 1974 Fender P Bass ..... Yes this is a real 1974 American made Fender. It's has some road wear but over all it's not bad plays and sounds good. Asking $975.00