Search results for query: *

Is this inout shaft usable? Or replace.

Looking for a pair of 72-74 duster front grill turn signal pigtails. Look like picture attached. Thanks.

I’m getting ready to swap my 8.25 with a narrowed truck Dana 60 Into my 70 duster. The truck Dana has no provision for a snubber, any way to build a snubber for it, or what are other options, how are others managing? I was considering traction bars, but this car will live on the street 95% of...

Swapped the rear in my 70 duster to a Dana 60. Can get a 4” diameter driveshaft in the right length for cheap. can I run this without clearance issues? Anything else to consider by using a 4‘’ diameter deiveshaft?

Looking for a rear seat for my 70 duster. Came across this ad. Guy claims it’s for an a body, I’m trying to verify that. Can anyone identify it. Here’s a piicture.

Looking for a 70/71 Duster front fender marker light bulb socket pigtail. It bolts to the front fender marker lights. Must be in working condition and not badly rusted. Need one. Please pm me. Thanks.

Hi my 70 duster never came with a rear seat. I’m going to a Mopar swap meet soon, but not sure what years, models interchange. I’m pretty sure 70-72 duster, 71-72 demon will work. How about 2 door valiant 70-72? I believe dart rear seats will not work and 4 door valiant seats won’t work...

This code worked for me yesterday and figured I’d share. Good until may 13, 2022 and You can use it for multiple purchases. The code is MOTORAMA22. You can save up to $200. Hopefully it saves you a few bucks.

My 70 duster had 50 year old slant 6 leafs. The ride height on the back was right where I wanted it. Approx 27.25” measuring through the centre of the axle to the wheel arch. I just swapped new leaf springs and with the new leaf now the car sits at 29” which is way too high for my liking. I...

I have for sale a Powertrax lock right 8.25 diff locker. Offers straight line performance equal to a solid spool yet unlocks during turns. Brand new in box, with owners and installation manual,never used. $325 USD shipped to USA or Canada. PayPal friends and family preferred. PM me.

Looking for an input shaft for a 1970-1974 A833 23 spline 25 teeth. 2.47:1 first gear. Let me know if you have one and how much.

Do I include the damper when measuring inside diameter for a single spring with damper. Looking for the correct measurement for the correct spring ID locator.

Hello looking for a 2nd gear for a 1970-74 a833 (23 spline version) - 34 tooth and has three grooves on the teeth as an identifier. Reverse gear and shaft. 25 tooth 2.47:1 input shaft. Shipping would be to 55605 MN. Let me know what you have. Thanks.

70 duster, A833 put a diaphragm McLeod clutch into it last fall. Pedal engagement was at about 2 or 3 inches from the top. Worked great out about 600 miles on it. yes I removed the over center spring. Just today I went for a ride and went to shift and clutch pedal changed on one shift as if...

Took my 70 duster for a drive today. For the first 5 miles or so it was charging normal per my aftermarket voltage guage. 14 volts, then when I looked back at the guage it went down to 12 volts and stayed there for another 5 or so miles, no matter the rpm, at idle at stop lights etc. Then it...

Hello, I bought a used edelcork air gap intake and the plenum divider has been milled down 1/2”. Does anyone know what depth the small block Chevy air gap plenum divoders are cut down in stock form? Just wondering if I need to go deeper or leave it be. Should I also blend the corners/sharp...

I was changing out my leaf spring bushings and when I tightened up my shackle bolts I snapped one off. It had some rust and perhaps I tightened it a hair too much regardless I need a replacement. I can only find info on the AC delco one see pic attached , but it’s sold out most places online...

I’m looking for some parts for my A833. 1970 and newer trans. Looking for an input shaft 2;47:1, 2nd gear, 1st gear and possibly the synchro mechanisms. Let me know what you have and how much. Thanks.

Hello, I disassembled an a833 which had some water in it at some point and where the rollers on the input shaft meet the main shaft snout there’s some rust on the main shaft. See the pic. This is the bad spot, the rest of that snout is fine. Can I sand this down a bit more and polish it up...

Found this video on YouTube and it taught me quite a bit about how the A833 works. Thought I’d share. Would be good to add it as a sticky somewhere I think?

Just bought a quick fuel ss750 double pumper off a member here. Installed it in my fresh 390 stroker (carb I had on it was a Holley 750 vac secondary). This thing is idling pig rich, all four corner idle screws are almost bottomed out and still super rich. Weird thing I noticed is that when I...

Hello. I’ve got a 70 duster which someone converted to manual before I bought it. I have not owned the car very long and decided to upgrade the motor. Recently I turned the 318 into a 390 stroker and the stock used clutch was not up to the task. I just pulled the trans to change the Clutch...

So I started a thread this spring regarding. Doing a mean 318 rebuild or go for a 328 stroker. Here’s the thread... Mean 318...or stroker....hmmm I took my time and did it all myself and so far so good. It’s now running so I’m on to the tuning stage. the specs... 1977 318 block, bored 40...

I’m looking to reuse the hydraulic flat tappet cam that came out of the engine that I just rebuilt 318 now stroke to 390. I marked and carefully stored everything so that every lifter goes back exactly where it came from. The lifters are still pumped up. The cam is a Crower 224/224 .465 lift...

I needed an extra 0.0005 clearance on my rods so I bought 0.001 bearings and plan to use one standard size half shell and one extra clearance half shell to get me the clearance I need. Does it matter how I arrange this? Does each crank journal for the pair of rods have to set up the same...

Just double checking that I read the instructions correctly. Large lip towards the front of the engine.

Do you need to burnish aftermarket intermediate/oil pump drive shaft bushings? I have a new Dura-bond AD-584 part number bushing to install. Thanks.

Setup was 318 engine, ported 360 iron heads, points ignition, weiand action plus dial plane intake, dougs headers, Cam is 224/224 250 465 lift 110 LSA And Holley 750 vacuum secondary. Engine had 7.8:1 compression will be 9.4:1 with the stroker. It is a manual trans, and at aproX 750 rpm idle it...

Should you put anything on the threaded oil pump pickup when screwing it into the oil pump such as pipe dope?

Was just looking over my new Melling m72hv oil pump and noticed the pressure spring plug looks to be installed backwards? My regular Melling pumps and my old high volume pump the plug is installed the other way? Covid quality control?