Search results for query: *

the smokin was because i forgot to hook up one of my main grounds i fixed that problem, and ya i thats what i was really wondering about the computer, and as far as the distributer i brought the motor to TDC one number one on compression strok and installed the distributer with the rotor...

just replaced my 5.2 to a 5.9 in my 98 dodge ram due to it throwin a rod, after putting the new engine in i had a bad ground and one little ground on the passenger side of the truck coming from the fire wall the block started to smoke, this was on the first inital turning over of the motor fixed...

oh i bet it was i figured it wasn't gonna be the easiest thing to do but ill get it done

thanks thats what i needed to know, im gonna give it a try tonight and see what happens appreciate the help

nope there not mixed up, and yes the adjuster bolt is completly out,

so i replaced the cross memeber in my 67 valinant becasue the passanger side had tore apart where the torsion bar goes through at. we pulled the doner cross member from a 72 and i just set it in there to test fit and i wanted to slide the torsion bars in to make sure everythings good but the hex...

hey im lookin for a fly wheel for a 360 i live just north of detroit but will pay to ship thanks, john

hey guys how do i figure out the cc of my heads, i want to buy upgrade pistons for my 360 but do not know the cc. they are the 915 j heads with no machine work done to them other then a valve job, with the 1.88/1.60, and the deck height is stock nothing has been milled, is there a standard cc...

alright i will just come pick it up from you your only about 40 mins away, can i come this weekend?

yeh i just read up on all of it, im just going to rebuild the 318 heads , im just trying to get it done for the high school nationals saturday at milan ,so its s rush thanks

i have a stock bottom end 318 ran strong just needed to be freshend up. i put a .465/.443 lift cam in and then stock 360 heads, now it does not seem to pull as hard as it used to, are the heads just not going to work, would i be better off with the stock 318 heads any help would be appreciated...

i really need a flywheel for a 360 for a 10 inch clutch let me know what you have, thanks, john

i have a bunch laying around, if your still looking for some let me know and i will get you some pics

i had the same problem on my 318, and on a 360 i bought i tore it down to rebuild it and 2 lobes on the cam were worn off and a bunch of lifters were dished shaped like that, i have heard that cheap oils and some other brands make this happen because of the different additives in the oils, i...

alright thanks alot i really appreciate the help

alright so it should perform just fine on a mildly built 360?

thanks for the comment on the car here is a pic of the intake

hey guys i was given an Offenhauser Single Quad High-Rise Intake and im doing a mild build on a 360 i was wondering how this will perform? i do plan on getting it port matched and all that facny stuff

im pretty sure that you can get the over drive transmissions out or some older dodge rams and i think maybe ram vans, that is what mine was out of, i had the over drive 904 in my car and it was out of a ram

very nice. my buddy lives right down the street from you, i gaurente you've seen my car come by or out in front of his house, ive been wanting to stop by and see your car but i never see you out in the garage workin on it, and when the door is open you and that car are gone lol. if u ever see me...

hey guys i have a 67 valiant im planing on running come the spring time after i get more work done. and im wondering what you guys think it will run in the 1/4 360 flat top pistons j-heads The 1.88 ones 484/484 cam cast iron 340 ta intake 650 dp dodge ram 4 speed 4.10 posi and slicks im...

hey guys i go to lakeview high school in st clair shores mi and for our after school auto program we are planing on having a car show come spring time to help raise money for the auto shop. it would be on a saturday or sunday and we thought about throwing in a little swap meet with it. im jsut...

yes all the rods were in the neutral position, we think the rod might just be out of adjustment so were going to try and see what we figure out if u knowof any thing esle let me kno thanks.

i have an 833 trans in my valiant and it will not go in reverse, we are makin custom rods because the trans is out of a truck, the shifter worked great before and now when we went to put it in the car it seems that the shifter doesnt want to go move the reverse lever(the one on the shifter it...

hey im looking for a 45 inch from yoke center line to center line drive shaft im in the detroit area im looking for one that is close by but if the price is right ill pay to ship it, thanks john

yeh i was there, your car looked amazing out there and just sounded great and ran very well, u live in roseville right? ive seen the car there my buddy lives right around the coner, i would always stop and stare when i would drive by it

i have a 67 valiant with a fiberglass 6 pack hood from a 72 duster so im pretty positive it will fit, the front clip of the duster and the valiant are basically the same with the difference of the grill. and i also have a 69 grill in my car. look at my pic of my car it has the hood on it.

if it is the same how much are you asking for it?

im lookin for some decent window chrome for my 67 valiant it doesnt have to be perfect just semi decent

alright thanks alot guys im going to go and try and find the color i want in single stage but if it comes down to 2 stage u guys helped me alot