Search results for query: *

I put the duster on a rear wheel dyno yesterday. Not sure what any of it means, as far a hp loss through the drivetrain. But the opportunity was there so I did it. Maybe someone on here could tell me what they experience loss through the drivetrain. Made 3 pulls. started the first 2 at 3000 rpm...

I put the duster on a rear wheel dyno yesterday. Not sure what any of it means, as far a hp loss through the drivetrain. But the opportunity was there so I did it. Maybe someone on here could tell me what they experience loss through the drivetrain. Made 3 pulls. started the first 2 at 3000...

Loaded up and heading to the Mopar Madness show and drags tomorrow at MoKan Dragway, anyone else gonna be there?

Here is the new Drag car I purchased 2 weeks ago. Had it out last weekend ran a best of 6.73 in the 1/8th. It is a 74 Duster. 440, Ross Pistons 11.5 to 1 compression, 906 heads with 2.14 1.88 valves fully ported. Mopar 312/590 solid cam. 727 with 4000 Turbo Action converter, Turbo Action...

ANy one here going to the Mopars Invade event this weekend at Mo-Kan Dragway? http://www.mokandragway.com/event_info/mopar.html

Heading to Italy on business tomorrow. Will be gone for a week. Hope I don't miss anything while im gone. I will not have my computer, so save all the excitement till I get back.

How do I know if my Gold membership ran out. I think it did! I wish some sort of notification is given before it just runs out.

Could someone help figure my compression ratio. I need to order a cam and would like to know what compression is gonna be. I haven't had any luck on a compression calculator. Here are the specs. 340 .040 bore. KB243 pistons. The heads are a 68 cc closed chamber so im going to run a .050...

Thinking of going with the cam listed below in my rebuilt 340. Question I have is, why does a roller cam require a bronze distributor gear? I don't see it I guess. Where the gears mesh the cams seem to be the same. Let me know the reasoning. And also does this seem like a pretty good cam?

Looking to trade my W-2 Heads, rockers and Holley W-2 intake for a set of fully ported Mopar heads. Would like some flow numbers on what im trading for. I would just like to get back to standard valvetrain, and headers. I would trade all my W-2 stuff just for a set of heads. Let me know what you...

Looking to trade my W-2 Heads, rockers and Holley W-2 intake for a set of fully ported Mopar heads. Would like some flow numbers on what im trading for. I would just like to get back to standard valvetrain, and headers. I would trade all my W-2 stuff just for a set of heads. Let me know what...

A friend of mine sold his blown 63 dart at the KC Mecum auction. I haven't been able to get ahold of him to see what it brought, is anyone here a member to see what it did bring? here is a link. http://www.mecum.com/auctions/lot_detail.cfm?LOT_ID=KC1212-140714&entryRow=534

I have a question? I'm looking to purchase a 340 .040 with KB243 pistons. They should come above deck .018. Would I be able to use a closed chamber head if I go with a .045 to .060 head gasket. Or is there something i'm missing?

My question is would this cam work with stock Rockerarms, or would they need to be adjustable? http://www.ebay.com/itm/LUNATI-318-340-360-CHRYSLER-MOPAR-276-284-VOODOO-HYD-CAM-LIFTERS-CAMSHAFT-KIT-/360421401020?pt=Motors_Car_Truck_Parts_Accessories&hash=item53eaca21bc&vxp=mtr

Does anyone here know if the 360-2 Indy rockerarms will work on W2 heads?

I finally pulled the 340 out of the parts car. I was hoping for a standard block, but after tearing it apart someone had already been in it. My question is there is nothing on the VIN pad on the bottom of the block its blank. Is this a common thing?

Have a question for you. I have a chance to trade for a 1974 Plymouth duster. The guy keeps telling me it has a 340 in it. He said it came from the origonal owner. He was told it had never been touched. The vin says its a 318. He took the casting number off the side of the block for me...

I am looking for a 4500 stall for a 727 to put behing my 360.

I have for sale a Holley Pro-Jection 4 . It comes with the fuel controller box, wiring harness, and throttle body. From what I have read it just needs a electric fuel pump and regulator. I bought it to put on my duster, then figured out after buying it it's 900cfm. Little too big for me. Guy...

I am running Autoolite 65 plugs in my 360. W2 heads around 10 to 1 compression. Mopar 284/480 hydraulic cam. My question is it seems to pull real hard to 5600 rpm, then falls flat on its face. Doesn't seem to gradually just all at once. I pulled a couple of the plugs, and they were gapped...

Just finished putting the W-2 heads on the 360. I have a question on what is the best spark plug to run with my combo. I should have about 10 to 1 compression. Its a .060 360 with W-2 heads. Mopar 284/480 cam. Running a MSD ignition box, and coil. What is the best plug and what gap should...

I am changing my heads tomorrow. Going from Stock 587 heads to W-2 heads. I'm currently running Stock Non Adjustable rockers. My W-2 heads have adjustable rockers, and Ball and cup pushrods. I'm not changing cam it is a Mopar 284/480 cam. I have put the matching springs on the W-2's. What...

Needing a set of W2 headers for my 70 Duster. I would prefer TTI but will look at anything. Let me know what u got. Thanks Rick

I have a vintage 12k Moroso cable driven tach. I think they called them a Jones tach. It is a hood mount with an anodized mounting body. I also have a matching 440 distributor with a spacer to mount in a 383 or 400. It is an electronic distributor. I do not have the cable. My question is...

Bought a set of ralley wheels today. The fronts are 15x6 the rear are 15x8.5. I'm going with 275-60-15 on the rear. My question is what size tire do I need to go with on the front. Here is a picture of the wheels in the link. Thanks Rick http://kansascity.craigslist.org/pts/2824055475.html

A good friend of mine has a Sharktooth Grille for sale. I have not seen it but am going to look at it tomorrow. He has someone coming to look in the morning. If he doesn't want it maybe someone on here does. He said it does have some dings here and there, and a couple of cracks, but it looks...

Ok here's the deal. I ran across a 360 for sale. The guy says its an early 90's LA 300hp 360 crate motor. He bought it new and sais it does still have the tags on the block showing the information from chrysler showing what it is. He says it has 308 heads, all forged internals, and hydraulic...

Why can't I get my avitar picture to show up? I've got it under the size requirements. And it says its my profile picture, so why isn't it showing up under my name?

I just noticed the young guns thread. Wish I had noticed it a little earlier and could tell a great story. But then I thought, a great story should always be told. So here it goes. Let me start off by saying I was too old for the Young guns thread anyways. But if you read the rest of my...

I hadn't drove the duster in about a week. Went out this weekend to go for a cruise and dead battery. Hooked up the charger and noticed my parking lights are on. The switch is off. If I mess with it I can get them to go off, and also noticed when I jiggle it my dash lights go off and on...