Search results for query: *

I don’t know what much of anything you mentioned , when I got the car the steering shaft was inside the couple then I removed all the bolts inside the car which allowed me to pull it outta the coupler. I plan on taking the coupler off now and installing it onto the steering shaft correctly next...

the coupler should be good, I’m going to check it again, the shaft collapsed when I was hammering the ***** into the coupler, I didn’t know the shaft could collapse which is why I hammered it in the first place.

Probably just gonna lengthen I don’t no much about it, I just know I don’t wanna spend any money on it right now

It’s an automatic but doesn’t have power steering, the engine was swapped from a 340 to a 360, the shaft used to fit but now it doesn’t

When I got it, there was no Ps, it was setup as a drag car before I came along

Will do boss thanks

Was taking apart steering column of 73 duster to replace the housing for the ignition lock cylinder. Went to put everything back together and trying to put the steering shaft into the couplet I noticed I’m missing like 2 inches and can’t put it back into the couplet. I don’t know how or what to...

do you happen to know how to bypass any of this like the seat belt sensor?

Im using both the engine and dash harness, its going into a 73 duster

What are the main differences to look out for when installing a 74 duster wiring harness into a 73 duster? As well as how to bypass stuff like the interlock system.

i plan on sending some pictures of both harnesses some time this week into this forum just so anyone who wants to help can see the differences and everything like that. I do appreciate all the help that was already provided, it should help make things easier when putting the harness in.

was it a mistake you sending a video about a windmill demolition?

So the alternator wiring that is on the duster right now, it goes straight to a connector along with the other 2 wires. The 74 duster harness has a thick black wire which goes into its own connector , like how the picture looks, and the other 2 go to a connector with additional wires. Also my...

Can you explain what a fleet alternator is?

I’ll try and find the manual online but if I can’t I’ll pm you. Also what do you mean the seat belt started interlock? Does this stop the car from starting and is their a way to bypass ?

So I recently bought a full body harness that was for a 1974 duster and I wanna use it in place of my butchered 1973 duster wiring harness. I believe the dash harness is compatible because it looks extremely similar to the harness that’s already in the car. My problem comes when I was comparing...

Got the Girl from a family members buddy, The back end of the car was in a fire, but the rest of the body of the car is all good. The guy was turning it into a drag car and dropped a 360 into it. I've had it for about 4 years now and am finally able to work on it during the weekends. The Engine...

I have the entire harness out of the car and I'm going through it and redoing the tape and testing each wire to make sure everything is good. I want to clean it up and make it look close to new. Which is why I want to put some new connecters on if its worth doing.

Just wondering if i should put some new waterproof connecters in place of my old connecters for my 73 duster. Just want some opinions if its worth doing or not.

I'm thinking about getting an EZ wiring Harness or Painless harness for my 73 Duster, the original is butchered and I cant afford 700 for a new on from Year one. I'm new to all this electrical car stuff and i dont know nearly as much as i need to know to be able to put this harness in. Im...

1973 Duster Need a new wiring harness for the car, all wires have been butchered and getting a new original harness from Year One is to expensive. What would be some good harness to look for that wouldn't be to hard to install considering I don't know **** about cars, i only know how to pull...

Got a 73 duster, the dash wiring harnesss is completely destroyed, no fuse box, majority of wires are cut into, nothing works. What is a good harness to get which will be a somewhat decent harness to install for a beginner?

I got a 360 small block engine. Rebuilding it and putting it into a 1973 Duster. The pistons are out of the engine but the rods will not move freely like they should. When i set the piston down the rods stand straight up and dont fall over. I can only move the rods with a malet. I tried spraying...

I found a nice looking 1970-74 Barracuda hood and wanted to know the ration L/W of the Hood. Going to compare it to a 1970 Duster hood. Planned on making 73 duster hood and grille conversion over to 1970 duster hood and grille but I like the Cuda hood better. Any advice or input would be nice...

Will do Thank You

Got a 1973 Duster from a friend. I'm 20 and kind of know kind of don't know what I'm doing. I want to swap the 73 front with a 70 duster front so grill, hood, bumper. I know I need different supports just don't know which ones are the right ones to use. Anyone know and trying to help?