Search results for query: *

Good afternoon. I was tuning my car today and it does not to want to idle below 900 rpm. This is with the idle adjuster screw all the way out. When I looked down into the carb all 4 butterfly's seem to be closed. Thanks....................Ted

I am beginning to assemble the windows on my Demon and there are a bunch of hardware that goes inside. I have gotten both of the window assemblies inside both doors. Now its time for the glass. I have a new set of parts for the windows but I have never been down this road before. If anyone has...

I have to replace the lower strut rods on my 74 Dodge Dart. My question is do I have to remove the disc brake assembly when you take the lower arm off. Your input is welcome. Thank you in advanced.......................Ted

Here is a dual row timing chain with a lower gear that has three adjustments. It fits mopar small block engines. It was in my motor for around five thousand miles. It is in perfect condition. This cost is $35. for it plus the shipping.

Here is a oil pump for small blocks. It was in my motor for around five thousand miles. It is a stock style and it is in perfect shape. This is a Melling unit, made in USA. This is $30 for the pump, plus the shipping. Thank you...................Ted

Has any body ever had the luck finding the plugs for the relieve spring and valve. I've have only able to find a shorter style one. Before I want to put it in I just wanted to know from you guys and gals. Thanks..............Ted

This is on my 360 (now a 408). It has an aftermarket 6 quart pan. It has a problem with the front and rear seals leak. Does anybody have a way to seal it up. Thank you in advance.

This is a tailhousing for a bodys. It has the cast in number C-97477 on it. It uses the 307 bearing. It is $150 for the part plus the shipping. Thank you.

Here is and trunk lock with one key and the nut. It fits 1973 an 74 A bodies. It also fits E bodies from 1973 and 74. It is for $45. for it and plus shipping. Thank you.

OK Here is what I'm running. It is a Holley #4150 (750) and it was rebuilt with the Quick Fuel Tech. billet metering blocks on both sides. Here's the problem. When the car sits for a few days both of the bowls are dry. Even the pump is dry. And here's another thing. If you let the car sit for...

Here is a license plate light that was removed from a 1974 Duster. It is $45. for it and it's free for the shipping if you live in the lower 48 states. Contact me here.............Ted

These are for 4500 series carb. They were removed from a 750 style carb and replaced with the 1050 ones. They are brand new and never had gas pass them. The cost is $45. for the 4 of them, plus shipping will cost you also. Thank you.

This is a very nice jacket. It is 1 of 50 made for S&S Cycle for their 50 years of progress. It has an S&S and a Mobil one on the front and a Mobil oil horse on the back of the jacket. It is $100 for the jacket plus the cost on shipping to you. Thank you.

Here is a Black and Decker drill. It has a 5/8 in. chuck. This is used but its in nice shape. $95. Plus the shipping. Thanks.....................Ted

For Sale is a set of pliers and the skits that fit the piston. It is in perfect condition. There are 6 piston sizes from 2 7/8 to 4 3/8. It is $50. plus the shipping to you. Thanks........Ted

Is there a chart or does someone would know the difference of dip sticks. My tranny seems to be a little low but the stick says that its almost overfull. Thanks....

I am going to buy a new set of rear tires and I wanted to hear from you guy and gals on your tires. Currently I am running 275/60/15 Goodrich tires and these are the worst for the track. They will spin on the launch every time. My car is a 74 Dodge Dart Sport with a 408 engine. Thank you...

This a Mallory coil that I used in a Dart. It is in perfect shape. It comes with the proper wire that plugs in to the coil. The price is $40 plus the shipping. Thank you.

I am beginning to take out the starter motor (it is a 1998 Dakota style) and before I get into it I would like to know if anyone has removed this style of starter from the engine. It is a 360 small block and it has the power steering. The headers are from Hooker 1 5/8 diameter. I was wondering...

Well it has been a long life for this starter. It is a Mopar brand. What I am looking for is if any one here has replaced their starter with one of the ones stated here. 440 Source has one for $100 and Power Products has one for $149. Any help would be nice...................Ted