Search results for query: *

I guess I will remove the wiper motor and sand the paint behind the motor, see what that does. Or maybe just run a wire to a ground first to see if that is the problem.

Here are a couple of pics of my switch. My dash is apart right now fixing the fuel gauge and the speedo. Thanks to RedFish and the fuel gauge and DemonIVR he sent me, the fuel gauge works (initial testing anyway) and I am just waiting for my Speedo to come back Deluxe Speedo and Radio...

Here is a pic of the wiper motor. Does this help? Am I missing a ground wire? This is exactly like the motor in my 73 Dart. The Dart used to have a two speed switch, but the post broke, and I replaced it with a three speed switch (only one I could find at the time that fit the plug...

Anybody want to venture a guess, or a a starting point, on why my wipers work on low speed but not on high? It is a 67 Barracuda. Has a two speed switch. The wiper motor is the kind that is parallel to the firewall, not the kind that is perpendicular to the firewall.

Thanks for the responses. But, I guess I am a little slow. What I thought was a relay in the package for my fan switch kit is actually the thermostat. In the description on Summit, it says "relay included: Yes", so looking at the stuff in the bag, I thought it was the relay. Apparently it...

I am hooking up relays for my headlights (one for each headlight) and a small electric fan. Neither of the relays have fuses. Two questions: 1) Do I put the fuse between the starter relay and the relay? 2) The headlight relays are rated for 30 amps, and the fan relay is rated for 16 amps...

Likewise, and the other issue is, my aftermarket mechanical gauges are bright enough, so I would like to "even" them out some with the dash gauges.

My dash gauge lights are kind of dim. I plan to take out my dash in a week or two to fix some gauges and was wondering if anybody has a part number for brighter dash bulbs. 67 Barracuda with rallye gauges. Thanks!

PM sent, thanks!

Thanks!!

67 Barracuda, rallye gauges. My oil pressure and water temp gauges work. My fuel gauge doesn't. I have one of those RTE/Dash Worx solid state voltage limiters wired onto the back of the gauge panel. I have a new sender unit installed into the new gas tank, and have a clean ground strap on...

Thanks, you are probably right about cutting the hood though.

My 67 Barracuda FB does not have hood (fender type) blinkers, I will most likely install a set. Just tapping into the front blinkers wires won't work because when the headlights are turned on, the blinkers will turn on, is this correct? So, the best place to tap into would be right before...

I did it in my 73 Dart (slant six) and has been running like a champ for 3-4 years now.

On my 67 Barracuda, I want to fill in the antenna hole and have some sort of hidden antenna, and am looking for suggestions. What has worked for you?