Search results for query: *

the damage seemed to be limited to the rear foot or 18 inches , and the pan seems pretty good yet.I was planning to cut the frame rails off of the top lip, or just below with a cutoff wheel. then install the 2x3 tube to replace the origional. this is how the right side of my 74 was done and it...

NOBODY has anthing to add? i cant believe that nobody here has made there own frame replacement

dartman , if you had put the big bolt through from the inside out you would not have had to grind the bolt.

the upper shuld instal with the same tool it was removed with, if not you can use a vice and a big socket for those. ive never done a stock lower so i dont know. no , it wasnt me who posted about the poly, but they are a more solid bushing and easy to install.

I made my own light duty arbor press for pressing out lca bushings that uses my porta power. I always use poly bushings and then you reuse the old shell rather than chisel it out

it looks like im picking up my second duster this week. this one is a 73 with the leaning tower of power, and an auto. body looks pretty good other than the quarters being solid bondo. the left spring is pushing through the floor, and the right is weak and starting to bend. frame rails on both...

I used to flip them on my circle track cars, then i found out that the angle change actually reduces forward bite!! A bodys are so light that traction always seems to be an issue, why would you make it easyer to spin the tires? the change may not be noticeable by "seat of pants" but times will...

from what i see in the pic, and from the 72 charger that i parted that had an addco sway bar , I think the lca bracket they give you is basicly a piece of 2" 3/16 angle 2" long with a couple holes in it, one for the end link and 1 to bolt it to your lca. a pair of brackets like this could be...

most rwd spindles will bolt onto other rwd cars (A,B,E,F,M,and J bodys) however drum brake A bodys do use a different upper ball joint so you would nead A body disk brake uppers. some bigger B bodys in the late 70s (Magnum cordoba ect) had larger rotors, but still used the same spindle and...