Search results for query: *

Thanks for the link. I may have to jump on a set of the slotted for the 73+ rotors! Are the pictures just generic pics? On the rotors, I dont see the hub for the bearings and wheel studs.

Are you sure the lines are plumbed properly? The front disc brakes will use the larger cavity of the MC (the rear most one) and the rear drum brakes use the smaller cavity (usually the farthest forward one).

I couldn't find a post on this already so here it goes: The drum brakes from 1973 and up 7-1/4 rear ends with Large Bolt Pattern will bolt on to the 8-3/4 rear without any hassle of fuss. People give these rears away either cheap or free, so you can just rob the backing plates (axles are not...

They go on the caliper adapter. Around the rectangle part where the caliper slides back and forth. You put them on, then the caliper grease stuff (I think its green) then the caliper then the caliper hold down with the anti-rattle spring and bolt. In the pic they are called "o-rings". I put em...

Will the easy-outs work on a Russel Speed-Bleed screw without too much trouble? Are those more fragile or something?

Wow I have bad luck today. I got EVERYTHING put together and ready. I am in the middle of bleeding the brakes and get to the right front side. I finish bleeding it and tighten the bleed screw and it BREAKS OFF! I mean CLEAN OFF nut and everything. And on top of that, the nut and tip part of the...

Well, I just went to the parts store after work and ordered the 76 sliding calipers. They were 15.00 each, and should be here first thing in the morning. I understand that the 73-up single piston sliding calipers have a 2.6" piston, while the 76 up have a 2.75". I found that in the Performance...

I was rebuilding my calipers and found that the pistons are rusted in patches on the sides. I plan to order some calipers. Will 76 A-Body calipers work on my 74 Duster? I have slider calipers right now, are all 76 A-body calipers sliders, or is there a possibilty of ordering pin-type without...