Search results for query: *

Yes thx for your help i will do that first!

Hi the fuel level was over the line it was parked, and about the fuel pressure regulator its hard to say because the fuel pressure gauge is shacking, u can read here http://www.forabodiesonly.com/mopar/showthread.php?t=207882 Im also confused with that because when i start the engine the first...

The oil is not dark because my head gasket is damaged, now its grey but the oil dip stick really smells like fuel

yes mine have vent tubes

Thats normal when u put gas in a spray cap and let it sit there, but the carb is closed same as the tank, when i want to start your car in summer then you also have the same fuel as you put in at the winter, i run 98 octane and the fuel here is really good, i dunno but i think i must ve a leak...

Hi guys i have a 426sb from hughes with a 950 bigs carb with a race mechanical pump and fuel regulator with return line to the tank, so when my car sit for few days 3-4 i have no fuel in the carb windows, and i have to crank crank and crank the engine, that sucks! Do i have a leak in the carb...

Thx for the link i just ordered 20 ft of those lines http://www.anfittingsdirect.com/product_info.php?cPath=302&products_id=1241&osCsid=bcd66a4a22093b5f52f97e4a6c28d7f4 and for the return line i have this http://www.summitracing.com/parts/rus-634160 will they fit the an fittings? Thx alot...

Hey guys i bought this fuel line for my car http://www.summitracing.com/parts/sum-220788/overview/ to late i read that: Notes: This hose is NHRA approved, however it is not recommended for fuel line use. You guys knew if i still can use it for fuel or not? Thx Peter

thx for your answer yes i think so too, that a liquid filled one will help me with my problem because it worked before fine too, if not i can sell it and have to find out what my problem is! Thx Peter

Can you guys show me some pics where you put the gauge on the hood and how? thx Peter

Hi guys i just tried a electric fuel pump on my old 318 now i have a stroked 426 from hughes and i used this pump http://www.racepumps.com/tech.html, the first time when i start my engine i adjust the fuel pump regulator at 7psi and it worked well then the gromet from my old gauge was damage and...

Thx for the reply but if its the mechanical fuel pump it should never worked before, but few weeks ago i had constant 7 psi on my fuel pressure gauge and it worked just fine

Hi guys i just made a short vid where you can see that my fuel pressure gauge is shacking, before i had one from allstar with glycerin and the one died now i have one from russel performance but its the same thing, could it be that i have some leaks up the lines? My car drive good without any...

Thx, first i hook up a vaccum gauge to the carb it reads 4-7hg in idle and the gauge is vibrating, i also took a brake cleaner for checking leaks but there was nothing i could find, i also checked the vacuum gauge on the intake manifold and there was also not more to read then 4-7hg in...

Hi guys on my 426small block i have a 950 bigs stage 3 installed, when i turn the key and start the engine, you can clearly hear from the carb that there is a rattle noise and it swoosh all the time when i get the rpm higher there is nothing to hear, i hope you guys can help me, what could be...

Thx that is what i wanna hear :tonqe: because when i disconnect it the fuel pressure will be alllways constantly!

HI guys i have a race pump regulator like this http://www.racepumps.com/Regulators-Street.html There is a vacuum port i installed it to the carb! At idle i have around 6 psi now i run them fuel pump too... When i pull the gas the fuel pressure goes down to around 3 psi, now i was confused...

bump

Hi guys i lost some fluid from my fuel pressure gauge, now i was looking for glycerin on many sites, but i dont knew which fluid comes in the gauge, 100% glycerin or mixed with water is my guess, but im not really sure, how much % glycerin and water and so on... i hope u guys can help me out...

Ok thx alot u helped me:)

Hi guys i knew where and how to put the ground strap on oem fuel lines but how i get ground if i have an aftermarket line like this one...

Yes thx i thought like that and then i put all together to the back of the carb?? Or i still have to drill a hole in my intake? thx Peter

Hi can u show me an example i really dont knew sure what u mean, do u mean just a piece what is looking like a "T" and then i dont have to drill ahole in my intake? thx Peter

Yes i know i had the same on my 318 before too but now i run a edelbrock super victor and that one dont have any holes on the back, so i wanna fix it in some easy way, maybe you guys knew how? thx Peter

hey thx for the reply how do i have to drill my carb spacer? You have some pics maybe, and what is with the brake booster line then where i have to put it? On the back of the carb i put the pcv valve hose now, is that not correct? thx Peter

Hi guys on my engine i put a bigs carburetor on it, now im wondering where i have to put the lines like from the pcv valve i puted on the back of the carb and the other line from the brake booster? A small line from the fuel regulator i puted on the front of the carb my distributor dont have a...

Hi i have the same, i should go sure if i can put my return line from the carburetor there, or i have to put it with the line in my trunk together?

thx thats i want to knew if it will work like that thx Peter

HI guys on my 72 a body i have installed a new fuel tank and i was wondering wt to do with the vent pipe over there, shown in picture? I just close it with a screw? Is that right so an if i need a return line from my carburetor i can install i there? Thx Peter

Hi yes it is an exact replica of the origina, i have a multimeter too, i will need about 1 or 2 months then i will knew more i work on my car now and i it will take some weeks that i can start with the fuel sending unit, but i will uptade you thx Peter