Search results for query: *

I got mine from Dan aswell good quality unit same colour coded wiring as Oem ,you will need to source the plug where wires feed through unless you pic the wires out of the old one .I purchased one from classic industries.

You might find that under idle with the fans kicking in it will draw quite a few amps . You are running relays with the fan& pumps ? and the msd will require full 12 V. I found with mine running a single fan electric pump 6AL with the Sniper setup with a 70amp setup would draw too much @ idle...

I run the power master 95 amp external reg runs the sniper , msd , thermo fan, min 13.4 @ idle the whole box and dice. No issues here . Sorry to add Crackedbacked head light setup aswell .

Abody get on to @slantsixdan he will put you in contact with a vendor which sell good quality switches , I received one my self and the quality is there and looks very close to oem. More expensive than the junk on eBay. same colour code wiring . Made in the US .

Rob makes them and sells them here .crackedback. Same person who Makes the headlight looms.

Just an update on the fix sorry for the long post first I got in touch with the shop I purchased it from and went down there and they tested it out and and fired perfectly brought me in to verify it cranked it up asked me what I had set the rev limiter to and tested fine. He said check the main...

I have nothing else hooked up to the coil besides the orange + black- wires. I’ve tried another coil and no spark , waiting on my brother to arrive back home and will try his as I know it works , will let you know how it goes . Funny thing when I had the 318 in it’s place I had a cheap HEI $75...

Hi all was just wondering if anyone has run into this issue , did an oil change and filter had the car running and decided to go for drive as you do when the weather is on, just got down the road and car just stumbled and shut off. Car wasn’t in a safe manner on a bend and it was a matter of...

Payed $18.00 on EBay PHILIPS Vision LED RED BRAKE LIGHT P21/5W BAY15D 1157 S25 Dual Brightness 12836 46677717988 | eBay

They haven’t been hacked and I can buy the normal type globe from rock auto , I purchased a box of ten due to them being odd and cannot source them here in Aus. When I get home from work I will take a photo of the globe.

Cuda 69 I’ve just ordered the philips rear ones you stated Any chance anyone one would know of an LED for the front Parker indicator for a 67 Dodge Dart as it’s an bayenet type twin filament but the side contact points are at the same height not off set. They can be white light as my lenses have...

He wasn’t using it to control timing.

On your hand held what have you selected as in your ignition typehttps://documents.holley.com/199r11488r.pdf?fbclid=IwAR128EGYNH4jj-vAtulklYm48CvHpNZ0IE9RwPmZJUmq0uyx8JaYkuJLY_E as you have been swapping to different distributors but are you changing your preferences on your hand held ? Page 38

All was needed was to remove the pump relay which is on the main harness as it won’t drive fuel into the unit and cause flooding every time you turn the key.

I purchased one of these kits not sure where you got yours from as this was a EBay special from a well known Mopar vendor sorry but this was absolute **** come with a wiring diagram as it had some different coloured wiring , wired up as per instructions didn’t work blew 2 flasher cans had to...

The problem with the FITECH SNIPER is the ecu is built in the throttle body and is more sensitive to rfi issues but if you run your cabling correctly and keeping certain wires away from others take some precautions usually everything pans out well.

Pishta you can do that with a small radio on a am station hovering over the engine bay if you don’t have a working radio in the car .

Have had good results with the msd wires 8.5 with the sniper . What I have installed are the noise suppresses I’m not sure of the correct name for them , we use them for RF noises on fax machines lines and they are installed on some high voltage lines in the back of the machines and I’ve...

Bigdummy Check out Rob who makes these [FOR SALE] - Charging System Bulkhead Wire Around (aka)crackedback which will take the load off your bulk head connector and prevent a melt down on your wiring .

Apparently with the Pertronix 3 Ready to run has the multiple spark through out the rev range and rev limiter is adjustable via module . Factory set at 5500rpm.

That's the only problem when ordering from China is the waiting time. They are virtually our neighbors and it takes 3 weeks min. Cool glad you got them and they will make a big difference, I had the green ones in first but had to change them as my eyes are not as good as they once were but I...

This is what I use in mine, wedge for the dash lights & tacho bayonet type for the oil,volts water. Got these on EBay and they were cheap ! purchased packs of 20 and they worked out around $ 15-20 per pack, from china. They work well and have assortment colours.

I purchased one of those $67.00 dollar specials inc delivery HEI dizzys from ebay and had it recurved and it hasn't missed a beat. Ive done close to 6,000 km since the engine rebuild and its been flawless,Like mentioned in one of the posts you need to replace the coil. I run a Bosch 55000 v...

I use the TCI type,due to the room it provides with the exhaust (Block Huggers) very light compare to the std type and Cranks the teen like its a 4 cylinder.Draws low amps and with the 3.73.1 ratio it turns it with ease.

I had the same problem on my Dart when i fire up it would start while i had the key in the cranking mode once i release the key it would die out,i thought it was the ignition barrel,replaced and still the same problem so while my son cranked the engine i started to jiggle the wires on that block...

Dont want to high jack this thread but are all the plug leads correct in their firing order, i made a simple mistake with 1 and 3 in the wrong order and mine was popping from one bank at idle!

Mine is the std type cap and running a external coil (bosh) with getting 12v all i did was join the 4 wires from the Ballest resister.Soldered the 2 wires on the right together and 2 left together than purchased a small joiner with locking screws from jaycar and thats it.Nice and neat as you...

Mine was the same when i got it and i thought the same as you, just make sure that number one piston is on TDC with both valves closed and firing fit dizzy in the same way as the old one now look at the rotor button with the cap slightly lifted to see which one is firing so you make that one...

I paid around 65 dollars + 20 for postage in Australia and it wasn't in a white box as every one has stated and the supplier has even offered a 3 year warranty on faulty workmanship! mate you cannot beat that regardless if you had an MSD or ICE ignition which would have put me out around...

Just fitted one of these to my sb Dart and what a difference compared to the twin point,Nite and Day. I used the bosh coil nice and small and mounted it on the heater motor mount bolts nicely tucked behind the rocker cover.