Search results for query: *

On a 69 Dart, where does the engine to firewall ground wire attach? Big block if it matters. I was thinking from the rear of the block on the passenger side to one of the heater blower motor nuts.

Thanks for the pics everyone!:thumbsup:

I'm adding a trunk light to my 69 Dart and would like to know where the light socket is supposed to be mounted. I have the plunger mounted but I don't know where to mount the bulb/socket. A pic would be great.

I finally found the ballast. I had cleaned it up and wrapped it in a tissue and put it in a bag. However, there is no ground strap with it or on the wiper motor. I don't remember having taken one off the car when I removed the wiper motor. Does anyone know where I can get one?

Is that a ground strap from the resistor bolt to the upper right firewall stud/nut??

I took the 2-speed wiper motor out of my 69 Dart years ago when I tore the car apart to restore it. I am finally to the point where I am reinstalling it. The problem I've encountered is I don't know what I did with the ballast resistor that mounts to it. I am sure I bagged and labeled it but I...

I do want to switch to an electric washer. My original thought was to add an electric washer jar and pump (which I have) and keep the 2-speed wiper motor since I have already refurbished it but I couldn't find any info. on if it was possible or not to have 2-speed wipers with an electric washer...

I've got a 3-speed wiper assembly (motor, arms, switch) from a 72 Dart I picked up years ago and was thinking about replacing the 2-speed wipers in my 69 Dart with it. My question is regarding the switch and dash harness plug. Will I have to get the under dash wiring from a 3-speed wiper car to...

Kenwood. Yes, it has a schematic and the schematic does call for two power sources. Of course I know the key needs to be on.

Well, I spent the day yesterday installing the stereo and 4 speakers. After connecting all of the wiring from the radio including tapping the red and yellow wires directly to the fuse box, I tried turning the radio on and nothing happened. I double checked everything and it all looks good. I...

I do have a couple of free tabs on the back of the fuse box to tap into. If I hook up the constant power (yellow wire) to one of them, will I still need an in-line fuse between the fuse box and the radio?

Yes, it’s the power feed for the memory. I will take a look at the fuse box tomorrow. Just thought there might be a hot line under the dash, possibly the lighter plug. It’s been so long since I used a lighter I can’t remember if the key has to be on for the lighter to work or if it’s hot all the...

I'm in the process of installing a new car stereo in my Dart. The factory am radio is still in place and hooked up except for the antenna. All of the wiring is done except for the yellow constant 12v wire. Where would be a good spot to make this connection under the dash?

Anyone? Someone must have a 4-speed car with a dash reverse light.

When I got my 70 Dart (4-speed) the dash mounted reverse light didn't work. It turned out the wire from it wasn't plugged in anywhere under the dash. I never bothered at the time to figure out where it went but I would like to finally get it working. It isn't cut and has the connector on the end...

I'd like to add an auxiliary dash light harness to my 69 Dart and have a couple of questions about an ash tray light. First, did they have ashtray lights in 69 Darts? And second, if so, what style were they? I have two different ashtray lights in my parts collection supposedly from A-bodies...

The numbers on the tag are no longer legible.

This rear wiring harness was in my 70 Dart when I got it and obviously wasn't the right harness for the car as it had different side marker bulb sockets than what 70 used. I got the correct harness for my 70 now so I would like to sell this one but I am not sure what it is for and I can't make...

I have several dash wiring harness questions I'm hoping someone can answer. My 69 Dart has AC which I am going to be removing and replacing with with just a regular heater/defroster set-up. I would like to know if I will I have to replace my dash harness with one from a non-AC car or is the...

Thanks. Would you happen to know what the part number is for a 2-speed wiper switch with the electric washer function?

I would like to convert my windshield washer from the foot pump type to electric. I know I need an electric pump and bottle and a electric washer/wiper switch for the dash. What I would like to know is what about the wiring? Will my dash harness have the proper connections and wiring to get...

I have that wiring diagram but the wires coming out of the engine harness at the ballast resistor don't match what is shown in the diagram. As I mentioned, the harness looks to be a reproduction piece and it doesn't look like it has been altered but I can't make heads or tails out of it. I'm...

I could use some help solving an electrical problem I have. I have a 70 340 Dart that has what appears to be a reproduction engine harness with the built in electronic ignition wiring. The electronic ignition control unit that came on the car is pretty ratty looking (it is an original factory...