Search results for query: *

door panels? or the upper plastic pieces by the windows? the door panels are 73 only and 74-76 This is because the 74-76 have 3 point seat belts and the retractors are mounted in the bottom of the door panel by the door This leaves an ugly hole for a 73

That thing is from down here in Florida seen it many of times was a cobbled together mess when I last saw it. Guy beat the hell out of it too hope he didn't bend you over for too much... It should also have a set of upper and lower dash pads of a 67-69 a body too

They foam is way different and would not fill the 71 covers

75-76 had a cat 74 down all same till 70

Man went back to the yard Saturday and they had the truck sitting on the top if the crush pile

Ok cool thanks buddy

Bump!

Hi Guys, Can I use the column collars from a floor shift 1983 dodge ram on my 1973 steering column to convert it to a floor shift column? The lever to remove the key doesn't need to work its useless anyway Any help would be appreciated Thanks

Subscribed

ClassicIndustries.com

70-72 A body? Cause 73-74 had the vertical pattern all the way up the headrest unlike your seats. Maybe 75-76

Nope There were no cut outs in the rear package tray like no fold down back seat cars My Fold down backseat 73 340 Duster had the rear door panels cut for a pair of 6x9s and it looked very clean. I have also seen where people put a pair in the roof right behind the bolt for the seatbelt...

Man you people are blind as bats and ignorant if you say they are 73 up a body. NO A BODY SEAT FROM 73 to 76 EVER HAD HARD BACK COVERS!!!!!!!!!!!!!!!!!!

The pic I posted shows a factory 73 A Body seat that was put in that car when assembled

Nope they are mid to late 70s B Body's 73 up A body Buckets didn't have hard backs they were vinyl and had the hinge covers in my pic. If you look at the pic the Poster ut up it has different hinge covers too. Also they were not as wide and had much less foam on the tops A body Seats look like...

All a bodies rolled of the assembly line with those cutouts...

Yes there was a factory option to have rear speakers. Also the blower type rear defrost uses one of the 6x9 holes to pull in fresh air from trunk to blow on the window

you will have to hack the crap out of the dash See Here: http://www.forabodiesonly.com/mopar/showpost.php?p=1969905973&postcount=18

And FYI that is a 75-76 Dash Cluster... One is for the EGR and the other (closest to the speedo) is the fasten seat belt light 73 cluster would have neither one of those in the cluster and just be a blank space 74 cluster only has the fasten seat belt light and no EGR light Those are the only...

My 74 Swinger has a Cap installed on it and it looks great much better than the factory pads in my opinion. The pad is not shown underneath at all. Will post pics later

They are not Mopar at all cause of the lever to adjust seat front to back is in front of the seat. Mopar adjustments were always on the sides. They are 85-92 Chevy S10 and Camaro seats. They are the exact seats that were in my 88 s10 Blazer except mine were tan. Another tell they are chevy is...

69-76 has a wood grain tops and a wood grain shifter unlike the 67-68 which had a silver tops and a chrome shifter But all the consoles from 67-76 will bolt in place of each other with no problems

Thanks Warren I knew I seen it somewhere but couldn't find who made it

Would be nice to find a blank version of these to place the gauges where you want not where they drilled the holes.

that's exactly what I did to my Dart a few years ago but I repainted some of the chrome parts outlining the gauges and heater control with a silver paint pen. Looks much better than the wood grain. Now just need to do something with the wood grain on my door panels

Here are 2 other options for speakers in the kick panel I was lookin at these as they have round 4 Inch speaker holes: http://www.classicindustries.com/mopar/parts/MA819102.html And these hold 4x6 Speakers and fit more flush (Top 3 on the page)...

Where did you get those belts I like that Idea a lot and would do it to my car too

look like 6 1/2 to me. Been wanting a set of them for awhile just haven't pulled the trigger

I have used wood screws as a replacement many of times and they work just as well. only used cause its what I have the most of

Nope they are wood screws