Search results for query: *

I’ve never used an o-ring housing, but I did switch from the paper gaskets to a reusable silicone gasket and that solved my leak issues. Thermostat Housing Gasket - MOPAR V-8 ENGINES - Part # RG-53063 SILICONE | eBay

This thread is 9 years old

I used the same sound deadening “insulation” on the roof as I used on the floor. I believe it was Siless brand, similar to the kilmat that RRR used. I only had two sheets left, and used it more to take away the tin can sound of the roof and really didn’t expect any thermal improvement, but as...

72. My cap sticks up higher than my core support as well, but easily clear the hood.

I know this is an old post but I remembered this morning that you’d found an oem reservoir that fit good. Found this post about the shipping from delray Hyundai, checked it out and it’s still the cheapest place I could find for shipping on the bracket. $10 shipped. Thanks Matt!

Thanks for looking! I’ll post an ad in the wanted section.

Yeah I spent probably about an hour last night googling and searching eBay for any reproductions and there’s nothing specifically for Mopar’s. They do make some for 69-70 mustangs so if push comes to shove, I’ll give those a shot.

That’d be great! If not, I’ll throw up a wanted ad and see if anyone has some. Thanks!

I’m guessing so. I never had any, it’s for a 72 Duster

Thanks, but the ones I’m looking for are for the little slidy lever thingamajigs. Mr. TIA :rofl:

So, I’m sure I’m not the only one, but my heater controls in my Duster are missing the knobs on the sliders. Anyone find knobs off something else that works? Or maybe modify/make something that works? TIA

Ok so I just measured and mine is in fact 23 5/8” from the bottom to the top of the radiator cap. When I installed it, I put a chunk of play-do on the cap and carefully closed the hood. I had 3/4-1” clearance.

I “believe” I have the taller version in my Duster and it cleared with 3/4-1” to spare. If I remember, I’ll measure it tomorrow and let you know for sure.

@Jim Kueneman

I’ve never tried these systems but I think I’m gonna try something like this eventually. EDIT: probably would’ve helped to post the link. Lol Clear View Aftermarket Defrosters and Defoggers

I’ve got the CC374B in my Duster. The bottom of the radiator is about 3/8-1/2” off the lower support and I still have 3/4-1” clearance between the cap and hood

I also went 26” in my Duster. I drilled 2 holes in my lower radiator support and put in some hood bump stops from an 02 Corolla for the radiator to sit on. I’m running a solid mount fan with no shroud (yet) and this summer, sitting in a drive through for 15 minutes, it didn’t go over 195*

Here you go. Fan shroud questions. Making a Custom Fan Shroud - Route 66 Hot Rod High

No if only someone would send me a heater core for Christmas..... :D I've got a few projects to do on my Duster this winter but gotta wait till we get some income again after New Years... Haven't gotten a pay check since September so no money for car parts right now....

Ooohhh shiny!! I'm guessing the 2nd pic was taken first and the first pic was after more coats?

One thing I didn't think about until you mentioned it got a little wrinkly is the fact that if you get a t-shirt wet it can stretch fairly easily, when you wash it and it dries it goes back to normal but since you made it wet with resin it may have stretched a little and can't return to normal...

This is the route in planning to go as well. Hopefully get one built this fall/winter. I think I'm gonna cover the wood in wax paper b4 I stretch the fabric over it tho so it doesn't stick

Took me awhile to find it on there but here's the link. Thanks. Making a Custom Fan Shroud - Route 66 Hot Rod High

You have a write up or something on this?

This is the exact one I got from this seller. It is however a cc374b. Was the best deal I'd found https://www.ebay.com/itm/322188482879

I've got the cc374b champion radiator. The cc374b is what they sell now I stead of the cc374. If you can get a true cc374 you'll be fine height wise. Mine was advertised on eBay as a cc374 but when I got it it was a cc374b, I notified the seller that he should specify that as the cc374b is...

All I can say is holy crap, moroso is proud of their tanks!!

Time to sell it n buy another huh? :D

Get a grip and grow up. If you can't take a little ribbing now and then, you've got issues. Rob has been a bigger contributor to this site than a lot of people. Put on your big boy pants and suck it up. Sheesh.