Search results for query: *

Would you be able to do a hard line across the front rails instead of the flex line? The flex line almost looks like an afterthought on such an immaculate build.

Not necessarily between the two. I had just been looking at them because I'm more familiar with Holleys then anything else. I'm not against trying a different carb.

Need a new carb. Want something with great throttle response and still flows good enough on the top end not to choke the 360. Car doesn't get drag races, just a street pounder. Current specs. 360cid/904tqflt Edelbrock Performer RPM intake Hooker long tube headers, dual 2.5 inch exhaust with...

Yeah it sounds simple but i'm having an issue with wrapping my head around it. I bought the this Proform distributor and it came with the orange ECU. I'm not sure whats going on with it right now. Trying to figure out if the distributor is screwed up or the issue is caused by my lack of...

NA that would probably be the case. Right now I have to mat the skinny pedal or acceleration breaks up and runs lean. Matted it scoots. Needsaresto, have you looked into these guys yet? http://www.candsspecialties.com/ http://www.quickfueltechnology.com/home_2.htm

I'm dealing with that right now except with a 750cfm 4150 on a 318 with a 904. Having to learn how to drive the car different with mechanical secondaries.

It can be done, no one makes a kit for it though. With the butt mount your going to loose quite a bit of efficiency with heat loss through the pipe before it gets to the turbo. Which means you will have to run a smaller turbo to compensate.

Its -10AN from the tank to the carb, -6AN to the carb and then -10AN back to the tank. The pump i'm using will flow 900lbs/hr at 8psi. I wanted to make sure that the return line will handle the surge after I get my hoof off the pedal. I could have went with a 8, but from what I have read your...

I won't be using E85 now.

Thanks for the link. I haven't rebuilt my carb yet so that is good information to know.

Do the paper/cellulose element fuel filters break down with E85 fuel? Right now I just have a 100 micron filter before the fuel pump. I'm looking to put a 10 or 40 micron filter after it but every filter I'm finding has a paper element. Here is how my fuel system is laid out. Let me know if...