Search results for query: *

Your not moving enough air and may also need a larger rad..Where you live? i do have a used but good condition electric fan that move a lot of air and has built in shroud .Might be able to help you.

Switch to a better fan flex fans wont cut it jmho.

P.S. I am kinda local and all so and hvac tech and i have a vacuum pump if you need one. Arco

there is no reason this cant be done. A couple of things to help First keep all lines and ports closed with caps or tape. after you change the oil flush system once all compotes are installed they self a/c flush kits.than once this is done add new oil to compressor.now hook up gauges and a good...

http://www.icorinternational.com/images/HS2GL.pdf This is a link that explains how to convert to hot shot.

I have seen this before with some systems.I found that there is a 134 a freon booster you can get it at most auto parts store.Also there is another freon called ICOR HOT SHOT it can replace 134a with a 14 % increase in cooling.If you go this route call a company in your area that does home a/c...

the fan is this electric?If so i would look at the fan.move it away from rad and give it some kind of shroud.

If your using rtv you must wait for it to cure 24 hrs then fill system and than you can start it.

Well there is another option check out this link. http://www.globaldensoproducts.com/hvc/electric_compressor.html

I have had similar problem before i found that once i flushed real good i than took some CLR Calcium lime rust remover filled it with 2 hoses suspended high let it sit for 15 minutes than flushed it real good problem solved.**** works real good and does not hurt the heater core.

I my duster i used something but if i say you going to laugh but i swear it took 15 degrees off my engine temp.and as long as i kept moving in the summer heat i could drive no problems long stops for traffic i still would have to shut it down .(liquid cascade)>>>>>i swear it worked well and...

If your electric fan is not off set from your main fan it will not allow enough air to flow.Next do you have a fan shroud ? if you do the fan needs to have 7/8 of fan in shroud and 1/8 to 1/4 sticking out this allows more air to flow.