Search results for query: *

They may have been installed at the dealer but they were shipped in the car. Alan

There ya go, "Dealer Installed" that pretty much sums it up. Alan

Not per any literature. Ads and brochures often show options different than actually available. Alan

In the Plymouth lineup these were an accessory, not available from the factory on the car. The dog dish was "standard" so not listed as an option. Alan

Nathan @Powerflite should be able to answer this. Alan

The tires I have received were just plastic wrapped with a label. Alan

When I had my Valiant I ran a few different looks... Alan

These are F-70x14 Bias Look Radials from Coker You have to get the reproduction D-70 to get close to the 205 Alan

Nothing sexier than a set of Red-lines Alan

No, all but one still had some original paint on it. Alan

One thing people may not know is that the center cone is clocked to the wheel cover. Most covers I look at the emblem is not clocked correctly. The cover has a notch in the opening that the cone keys into, this is typically done but not always. The emblem could go on in three different...

For about 10 year plus I have been wanting to freshen up the paint on my bolt through wheel covers. The convertible I recently purchased had these wheel covers on it but were fully polished and no argent accent on them. I took that set off the car and collected the set I have for my fastback...

That was a test fit of the tire size, this came off a different car. I do have a new spare now. Alan

Here are some 225-70-14 on a Valiant that I had, fenders are a little different, never had a problem. Years later I put one of these in my Barracudas trunk and almost couldn't get it out. Alan

Stockton Wheel Stockton Wheel - Products OEM Mopar - Mopar Police - Mopar Rally CALL. Alan

The center slug setback from the outer rim is different between the 4-1/2 & 5-1/2, once you see the two it is easy to see the difference. Alan

Body color only with dog-dish caps, satin/semi-gloss on full wheel covers Black cars with dog-dish got gloss black wheels. Alan

I'm surprised Max @mvh hasn't chimed in on this. Alan

Wheel covers and dog dish caps are on the broadcast sheet along with the wheel color. Alan

Were your wheels body color? Someone could have ordered it with the dog dish or they were swapped out later. Alan

Exactly, it is Extra on the Barracuda, standard on the fastback. That is a list of Options That being said, the dog dish would be standard. Alan

You probably can't find reference to it as it was probably "standard", all other were optional. Alan

Standard wheel was 14x4.5, the redlines were on 14x5.5 Alan

That would be an axle grease cap, not a hub cap. I agree a dog dish is a hub cap and not a wheel cover and a full wheel cover is not a hub cap. Alan

In 66 both lug nut numbers are listed I didn't see the Bolt-thru cover listed in 66 Alan

Looking at the 67 Parts Book the part number for the Bolt Thru style indicates 14" There are two different numbers listed for the lug nuts 2530824/5 1-5/16" 2534906/7 2-3/16 My car (67) has the longer one with 4-1/2 wheels, as-is from the factory. Alan (I now have 5-1/2 wheels)

There is no way the covers I have on my 67 Barracuda would work on a 13" wheel, as it is the cover go over the rim of the wheel, no way it is touching the tire (another 1/2") Alan

For those that have these, you should use a deep socket on these as the lug wrench will mar the edges half way down. Alan

Here you go, can't beat NOS 1965 1966 1967 1968 Plymouth Barracuda Valiant NOS MoPar LONG Lug NUT Set | eBay Alan

I didn't specify a size because I wasn't sure what mine was and if all were the same. I think it is 3/8-16, it is easy to check if you have the stud. Alan