Search results for query: *

They are 325/50/15s. They are Hoosier street tire. I have minitubbed and moved the springs under frame rails,so I have room at the springs,but they rub just a little on the upper inner fenders.I have clearanced the inner fenders up high,but still a slight rub.

Any of you guys or galls running a panhard bar? I am thinking about doing so on my 72 Dart,so as to keep the tires away from the fenders.They are really close and rub when I turn. I have about 1/2 inch clearance on either side of the rear tire. I am about to rebuild the rear leaf spring bushings...

Thank you for the promp reply.I will be purchasing your products soon. Dale

Does any one know if one of the new adjustable anti- sway bars from Helwig [6907]{ the one which mounts on the frame rails] will fit a Dart with a narrowed 9 inch?As regards the front sway bar 5906 [Helwig] will it adapt to a 72 Dart that did not have a bar installed from the factory?

Thanks I will check into that!

Thats exactly what I was doing while I was waiting on a reply!! Looking at the Monroe site,and they have lots of good info. I did relocate the spring under the frame rails, I forgot to mention that important fact. Did you relocate your springs? Monroe # 31000 looks like the ones and Oreillys...

What rear shocks did you guys use after you minitubbed your A body? I put the originals back on after minitubbing my 72Dart, and they bottom out after about 2 inches of down travel which I knew they would when I installed them.Went to Oreillys,but they were no help at all.

What would be the most one could lower an A body by way of torsion bar screws without compromising anything? I have a 72 Dart that I am working with. What have some of yall done in this area?

Thanks

How far back have any of yall moved your rear axle assembly so as to get a more centered look on wheels. 3/4 inch or so . One inch? I am just wondering. Thanks Dale

I am thinking about making some subframe connectors out of small pipe.I saw some for sale on line somewhere[I can not find them now].I have access to free pipe at work. I have 1.5 inch pipe double wall {3/16 inch thick] I have 1.25 inch pipe single wall {1/9 inch thick} The ones I saw on...

I saw somewhere on line,some connecters made of 2 pieces of smaller size pipe welded side by side,with a plate on the front end,and a box type end welded on the rear.They were for sale,new, on some web site.Maybe Ebay{I can not find them anywhere} I have access to pipe at work,for free! I have...

Thanks guys,it has no cover in rear its solid and the punkin comes out the front.so it must be a 9 inch.In fact the fellow who owns it came by today and said it was for a fact a 9 inch,he just did not know if it was a small axle shaft or large.

Ok,here is what I need help figuring out.I have a friend with a 1979 Mercury Cougar XR7,rear end is the only thing left.Trying to figure out if it has an 8.8 or a 9 inch.Couldnt get under car far enough to get any numbers,however the end of the axle shaft has 4 holes in the center section,not...