Search results for query: *

Any parts store with a good Dorman selection will have them.

@63GT, some of us are looking for site plugs.

Speedway, Summit, Jegs.

Which do you need, short one or long one? And yes, BBM is different from SBM.

I believe that is the bracket. I'll PM you my phone number so you can call and we can check the measurement on the two mounting holes.

TTT

Does anyone out here have a bracket for a Mallory 4307M fuel pressure regulator? I believe one from a 4307M, 4309M, 29387 or 29389 will work. I guess when Holley bought up Mallory, they did away with parts and pieces. They told me it was discontinued and no longer available by itself.

On the head, it should say C 11.

After 1964/5, 904 and 727 valve bodies are interchangeable, I don't believe the earlier ones will swap with the later ones.

Does anyone have a pair of C11 seat belts bolts they don't need? PM me total pricing shipped to 77328. TIA

Well I have about 30 or so A body doors, if you can't post a picture, the I don't have time to go look!

Can you post a picture of the dash? that will help us see what your are looking at.

Have you checked with Brewers?

I have the panel and the filler neck.

The dowel pins should measure .3010 +/-. I just measured the pins on one of my blocks and the receiving hole on a cylinder head.

FM&J cars use a transverse torsion bar setup.

Check with Bridger Bollinger over on the FM&J site. He is in Valdese, NC. Really a nice guy and a pleasure to deal with, and his prices are reasonable. If you need his number, PM me and I'll get it to you.

Members here advertise them for sale here quite a lot. I'm sure someone out there has one.

He works strange hours and it may take a bit for him to get back to you. Let me know if you need his number and I'll dig it up. He is really a great guy to deal with and he is extremely fair in his prices.

Contact Bridger Bollinger over on FM&J site, he had 5 or 6 of them when I was at his place last summer. FYI, he is in North Carolina if you can't reach him on the site, PM me and I get you his number.

Thanks, let's take it to PM when you answer please.

What do you have in the 700/800 lift cams? I maybe interested in the 700 area.

I may have some of the fittings, but mine don't have the shoulder as thick as the one in the picture. I look in my off site stash tomorrow and let you know.

As stated, buy the Fifth Avenue from 89.Fifth. A grand and you have everything you need plus you can part out the rest to defray the initial thou you sent.

@dddDuster has one.

Just to get it running, use any valve covers available. Just FYI, the OEM finned covers have gotten "expensive".

repo, slang short description for reproduction.

Anybody???

ISO a pair of 1/2" valve cover spacers for LA heads, I thought I'd see if anyone here has a pair before ordering from Medice's Ebay store.

Unless you are running an all out drag car, the gear drive isn't going to benefit you.