Search results for query: *

I am using a holley electric pump ( Blue ) that puts out 5-7 psi and have had no problems , they also make a red that pumps out considerately more and requires a regulator and the regulator has two outlets for either a dual 4 or dual feed into one carb .

Shoot try to find some 273 exhaust manifolds and you are in . Sounds like a fun cruiser .

I agree but I have only ran OPEN fenderwells for about 3years now and only a speeding ticket and not a exhaust ticket , I guess I'm just lucky .

I have had this intake on my motor for at least 5 yrs now and had to replace the gaskets but they leak at the water ports and possibly at the intake runner area also . I had a different set of gaskets on there than the blue stock replacement gaskets I have on there now ? The intake I believe has...

Goto the manual trans forum and there is a discussion on this very subject with all combinations possible .

I really enjoy the .528 solid purple shaft from mopar (to the neighborhoods dis-pleasure with open headers) and the 273 adjustable rockers and also only need to adjust rockers once a year . If I was gonna build your engine I'd stick with the mopar purple shaft line of cams (but maybe go 1 or 2...

I have personally seen where someone used some type of sealant on every bolt that goes to a 318 and the siliceno had gone through every cooling and oil passage in the motor clogging the radiator and the oil passages in the head not allowing oil to the rockers . I would suggest that you check the...

I really enjoy my Holley strip Dominator

Yeah ,I really enjoy the .528 Solid in my 340 4 speed 3:90,1 gear for about 4 years now . I don t baby it either my neighbors will verify the 20 30 foot sure-grip marks!!!

To check for a vacume leak get some starting fluid and CAREFULLY spray on one side of the carb until you ve gone all the way around then the intake gaskets at the head if the RPM picks up you have found the leak. I like to use the black permaseal gaskets on the exhaust for both manifold and...